A Nalin Enterprises
Chandigarh
Home»Our Products»

Tile Adhesive

The tile adhesive is mainly comprised of cement that makes it suitable for the fixing of tiles on the external floor and internal walls. These are also well suited for fixing most of the natural stones. We are looking for queries from Chandigarh, Panchkula, Mohali, Himachal Pradesh, Punjab, Baddi, Jammu & Kashmir, Haryana & Delhi.


Weber Set Classic Tile Adhesives

Weber Set Classic Tile Adhesives
Weber Set Classic Tile Adhesives

Product Description:

Weber Set classic is a grey, polymer modified cementitious tile adhesive. It is used for fixing low, medium and high porosity tiles of regular size on new substrates, over old tiles and other flooring material.


Key features:

  • It is a ready to use mix, a single component product.
  • It has excellent adhesion properties, no slip is observed on vertical applications.
  • Shrinkage cracks are minimized / eliminated due to its self curing properties.
  • Larger quantity of material can be mixed at a time due to its longer pot life.
  • The tiled floor can be made available for foot traffic after 24 hours.
  • It can be conveniently used for tile on tile application as it does not involve removal of earlier mosaic tile hence no debris, no dust.


Recommendation:

It is recommended for application on cementitious substrates, self leveling screeds and fiber cement boards.

 

Directions for Use:

  • Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust, if any, using high pressure water jet or any other suitable method.
  • Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
  • Concrete screeds, renders and block work should be sufficiently cured to avoid shrinkage cracks.
  • Correct the local undulations / damages at least 48 hours before the application of Weber Set Classic.
  • Saturate the surface well and remove excess water before application of the tile adhesive

 

Weber Set Plus White Tile Adhesive

Weber Set Plus White Tile Adhesive
Weber Set Plus White Tile Adhesive

Product Description:

Weber Set Plus White is a polymer modified cementitious white tile adhesive used for fixing normal and medium porosity* tiles of regular size on new substrates with regular traffic. It is specially recommended for glass mosaic due to its white colour which adds to the aesthetic look.

 

Key Features:

  • It is a ready to use mix, a single component product as excellent adhesion properties, no slip is observed on wall applications.
  • Shrinkage cracks are minimized / eliminated due to its self curing properties. Larger quantity of material can be mixed at a time due to its longer pot life, a tiled floor can be made available for traffic after 24 hours.


Directions for Use (Surface Preparations):

  • Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust if any, using high pressure water jet or any other suitable method.
  • Ensure that the substrate is flat, stable, well adhered and has a normal absorption
  • Concrete screeds, renders and block work should be cured sufficiently to avoid the shrinkage cracks.
  • Correct the local undulation/damage on the substrate at least 48 hours before the application of weber set plus white
  • Saturate the surface well and remove excess water before application of the tile adhesive

Weber Set Firm Tile Adhesive

Weber Set Firm Tile Adhesive
Weber Set Firm Tile Adhesive

Product Description:

Weber Set Firm is a polymer modified tile adhesive used for fixing any porosity* tile and natural stones like marble, granite on new substrates.


Key Features:

  • It is a ready to use mix, a single component product
  • It has excellent adhesion properties, no slip is observed on vertical applications
  • Shrinkage cracks are minimized / eliminated due to its longer pot life
  • Larger quantity of material can be mixed at a time
  • the tiled floor can be made available for the foot traffic after 24 hours
  • It is recommended for window and door frames

 

Directions for Use:

  • Clean the substrate of oil stains and bond inhibiting  compounds. Also remove dirt, dust and laitance if any using high pressure water jet or any other suitable method.
  • Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
  • Concrete screeds, renders and block work should be cured sufficiently to avoid the shrinkage cracks. Correct the local undulation / damage on the substrate at least 48 hours before the application of weber set firm.
  • Saturate the surface well and remove excess water before application of the tile adhesive.

 

Weber Set Plus Grey

Product Description:

Weber Set Plus Grey is a polymer modified grey cementitious like adhesive. It is used for fixing normal. Low and medium porosity tiles of regular size on new substrates with regular traffic. It is applicable for both interior & exterior surfaces.


Key Features:

  • It is a ready to use mix, a single component product, just add water in the specified proportion and apply
  • It has excellent adhesion properties, no slip is observed on vertical applications
  • Shrinkage cracks are minimized / eliminated due to its self curing properties
  • The bled floor can be made available for foot traffic after 24 hours.
  • It provides good water as well as heat resistance for external applications.
 

Directions for Use (Surface Preparation):

  • Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
  • Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
  • Concrete screeds, renders and block work should becured sufficiently to avoid the shrinkage cracks.
  • Correct the local undulation / damage on the substrate at least 46 hours before the application of weber set plus grey.
  • Saturate the surface well and remove excess water before application of the tilt adhesive.

 

Weber Set Premier Tile Adhesives

Weber Set Premier Tile Adhesives
Weber Set Premier Tile Adhesives

Product Description:
It is a cementitious tile adhesive for fixing normal porosity ceramic tiles of regular sizes on new substrates. It can be used over cementitious and self-levelling screeds for internal application only.

Key Features:

  • It is ready to use mix, a single component product
  • It has excellent ashesion properties, no slip is observed on vertical applications
  • Shrinkage cracks are minimized / eliminated due to its self curing properties
  • Larger quantity of material can be mixed at a time due to its longer pot life
  • The tiled floor can be made available for foot traffic after 24 hours

Weber Set Flex Tile Adhesives

Weber Set Flex Tile Adhesives
Weber Set Flex Tile Adhesives

Product Description:
It is a high performance polymer modified adhesive for fixing low porosity and large format tiles where nominal substrate movement is expected.

Key Features:

  • It is ready to use mix, a single component product, just add water in the specified proportion and add
  • It has excellent adhesion properties, no slip is observed on vertical proportions
  • It is suitable for external cladding
  • Shrinkage cracks are minimized / eliminated due to its self curing properties
  • Larger quantity of material can be mixed at a time due to its longer pot life
  • The tiled floor can be made available for the foot traffic after 24 hours
  • It is suitable for heavy duty applications with moderate structural movements

Roff Non-Skid Adhesive (NSA)

Item Code: 102

Cementitious Polymer Modified Tile Adhesive

ROFF NON-SKID ADHESIVE is a blended polymer modified cement based powder tile adhesive. It gives excellent bond on cementitious surfaces like, concrete, plaster, etc. ROFF NON-SKID ADHESIVE forms a waterproof barrier between two surfaces and has excellent ‘grab’ properties. This is an ideal product for Tile-on-Tile applications.

Areas Of Application

For fixing all types of tiles on internal wall / floor, external floor & tile on tile applications. As well as swimming pool tiling applications.

Features & Benefits

  • Ready to use, needs only mixing with water
  • Excellent adhesion, low shrinkage
  • Suitable for indoor and tile on tile applications
  • Sufficiently flexible to accommodate physical & thermal movements
  • Needs no curing, needs no hacking or mechanical key on the surfaces
  • Floors can be used after 24 hours
  • Soaking of tiles & backing of surface not required

Method Of Application

  • The surface to be tiled should be sound and thoroughly cleaned. Old surface should be free from wax, grease, polish etc.
  • Pour one 25 kg bag in approx. 8 lt. of clean water (recommended proportion approx. 3:1 of powder to water by volume). At site,addition of water shall be adjusted to attain desired consistency. Do not put water into the powder. Mix with a trowel / slow speed drills (50 - 100 rpm) until a lump free homogeneous paste is obtained.
  • Always mix the required quantity, which can be consumed with in the prescribed pot life adopting the mixing proportion mentioned above.
  • Spread the adhesive to a thickness of approx. 3-6 mm and comb with a notched trowel. Strictly apply the adhesive paste which can be tiled with in 10 to 15 mins.
  • Intermittently touch the adhesive paste on substrate by finger. If the adhesive sticks to fingers then continue tiling and if not scrape off the adhesive and apply new coat.
  • Start placing the tiles on the surface to be tiled. Tap the tiles properly to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids.
  • Keep joints between two-tiles using Tile Spacers
  • Allow tiling to set for 24 hours and start filling joints next day with ROFF RAINBOW TILE MATE.
  • Mix ROFF RAINBOW TILE MATE powder with water in ratio 2.5: 1 (1 water to 2.5 ROFF RAINBOW TILE MATE) and press it firmly in joints.
  • After grouting clean and polish tiles with a damp sponge or cloth. To remove Hard Stains use ROFF CERACLEAN

Precautions & Limitations

  • Do not use for vertical cladding of heavy tiles
  • Always add powder to water and not water to powder
  • Do not add more water than recommended
  • Do not add sand or cement at site
  • Before doing tile-on-tile application, ensure that the original tiling surface is in sound condition.
  • In case of undulations in the existing floor, rectify the same before applying ROFF NON-SKID ADHESIVE
  • Strictly not recommended for the direct use on gypsum plaster, paint, wood & metal. For such applications apply ROFF SUPER CRETE over a dry & clean surface. Thereafter within 60 mins start applying ROFF NON-SKID ADHESIVE. Particularly for application over wood/metal the surface must be sufficiently rigid & stable to receive tile and capable of carrying the load of tiles without excessive deflection. Consult Technical Dept., CC Division of Pidilite Industries Ltd.

Technical Specification :

 

For Specification Please Click PDF File :

 


Glass Tile Adhesive

Item Code: 131

Cementitious polymer modified tile adhesive

Roff glass tile adhesive is a white colour polymer modified cementitious tile adhesive specially designed for heavy duty tile applications like marble fixing and glass tiles on internal/external vertical surfaces. This tile adhesive has excellent waterproofing property.

For more specification please click our PDF file :


Roff Heavy Duty Cladding Base And Binder

Two component system for heavy duty application
     
ROFF Heavy Duty Cladding Base ( HDC ) is a polymer modified cementitious powder required to be used with ROFF Heavy duty cladding Binder ( HDC – Binder ) for installation of heavy tiles (non porous) & stones on internal / external wall.

For More Specification Please Click Our PDF File :


Roff Ply Master

Flexible additive for Tile on Wood

Roff Ply Master is a flexible additive for use with Roff NSA. It is specially formulated to provide a strong, super flexible bond for tiling on specially exterior grade plywood & most substrates.
 
Areas Of Application

Fixing tile & stone on wooden, gypsum, bison, Asbestos & fibre cement substrate for internal / external application in residential as well as commercial areas like shops, malls, club houses, country home etc.

For More Specification Please Click Our PDF File :


Stone And Tile Adhesive

Roff stone tile adhesive is a blended powder polymer modified cement based tile adhesive specially designed for heavy duty tile applications like granite, mosaic on internal/external vertical surfaces. This highly flexible adhesive has an excellent waterproofing ability also. Roff stone tile adhesive is suitable for fixing ceramic, glazed surfaces, natural stones, etc. , on a new substrate & tile on tile applications.

for more specification please click our pdf file :


Fevimate Tile Adhesive

Item Code: 113

ROFF FEVIMATE PA is a liquid additive for fixing ceramic, marble & terrazzo tiles on new surfaces. It is an easy to use liquid polymer additive, which is mixed with ordinary Portland cement and sand at site to produce high strength, impermeable mortar for fixing tiles.

 

For More Specification Please Click Our PDF File :


Fevitite Vertifix

Incredible strength for unmatched performance   

Fevitite Vertifix is a two-component, high strength construction epoxy adhesive for, Spot bonding large format tile and stone on vertical surfaces, For either interior or approved exterior applications. Available in a standard 15 minute set version.

For More Specification Please Click Our PDF File :


Marble Adhesive

Adhesive for Marble / Granite

Fevicol Marble Glue is unsaturated polyster resin based quick drying adhesive specially developed for marble /Granite fixing application and dry cladding on concrete walls.

For More Specification Please Click Our PDF File :


Roff New Consturction Tile Adhesive

Crackresistant and waterproof tiling


Roff new construction tile adhesive is polymer modified cement base powder tile adhesive. It is grey coloured powder & as name suggest this product is most suitable for wall tiling on plastered wall & floor tiling on pcc/ ips substrate by substituting conventional method of cement & sand.

For more specification please click our PDF file :


Fevitite Super Fast

Fast & Clear Epoxy Adhesive

Fevitite Superfast is a two component fast setting super strength epoxy adhesive that bonds virtually any tile or stone to any substrate.Being faster setting (2-3 Hrs at 30°C) it is ideal for those jobs which have to be finished in 3 Hrs.

This multipurpose two component system comprises of Epoxy resin and hardener which are to be mixed thoroughly in the recommended ratio to achieve optimum results. This system does not contain volatile matter, hence there is negligible shrinkage on curing.

Fevitite Superfast which is internally flexible, provides strong joints with excellent low creep properties hence, make it ideal for structural bonding applications.

 

For More Specification Please Click Our PDF File :


TDS - Fevicol Marble Glue

Fevicol Marble Glue is a two component unsaturated polyester resin based quick drying adhesive system specially formulated for fixing Marble / granite to each other & along with bolts to fix the Marble vertically on exteriors of big buildings.

For More Specification Please Click Our PDF File :


TDS - Fevitite Superfast

Fevitite Superfast is a two component fast setting super strength epoxy adhesive that bonds virtually anything to anything from tiny electronic parts to large structural components. Being faster setting (2-3 Hrs at 30°C) it is ideal for those jobs which have to be finished in 3 Hrs. This multipurpose two component system comprises of Epoxy resin and hardener which are to be mixed thoroughly in the recommended ratio to achieve optimum results. This system does not contain volatile matter, hence there is negligible shrinkage on curing. Fevitite Superfast which is internally flexiblized, provides strong joints with excellent low creep properties hence, make it ideal for structural bonding applications.

For More Specification Please Click Our PDF File :


TDS - Fevitite Vertifix

Fevitite Vertifix is a two-component, fast setting high strength construction epoxy adhesive used for, spot bonding large format tile and stone on vertical surfaces & for either interior or approved exterior applications. It bonds virtually anything to anything from tiny electronic parts to large structural components.

Being faster setting (15-20 mins at 30°C) its handling time is achieved much faster which is apporx.2hrs & hence is ideal for those jobs which have to be finished in 2-3 Hrs. This multipurpose two component system comprises of Epoxy resin and hardener which are to be mixed thoroughly in the recommended ratio to achieve optimum results. This system does not contain volatile matter, hence there is negligible shrinkage on curing. Fevitite Vertifix which is internally flexiblized, provides strong joints with excellent low creep properties hence,make it ideal for structural bonding applications.

For More Specification Please Click Our PDF File :


 

A Nalin Enterprises

Mr. Sanjeev Gupta (CEO)
No. 131, Industrial Area, Phase - 1
Chandigarh - 160002
India
© A Nalin Enterprises. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited