Anand Automotive Limited

Styling flexibility and comfort in the cockpit
Integration of structural and HVAC functions
Know-how from a single source
Simple cockpit assembly

Cold end assembly can be a combination of Muffler boxes, resonators, hangers, brackets and 3-D contour pipes. It is critical to ensure the pipe has no residual stresses or shrinks.

Performance and packaging depths
Unrivalled power densities for 12, 16 and 20 mm deep condensers
16 mm deep cores dominate
12 mm cores increasingly used in cars
Additional 20 mm special version for trucks

Designs
Classic condensers
KOMO® condenser modules with integrated receiver/drier and filter. Stable subcooling with resultant high cooling performance over a broad range of refrigerant charges
Condensers with integrated oil cooler
Lightweight and compactly fitting designs
Extremely robust brackets and connections for truck applications
Highly corrosion-resistant designs
Sensors, charging valves and coating as needed

Driveshaft connects an automobile gearbox to a rear differential of the vehicle. It is also referred to as a "Prop-shaft". The Company has a combined capacity to manufacture 10,00,000 propeller shafts/year which includes the Spicer 10 series, Spicer life Series (SPL Series) & Compact Series for the entire range of vehicles including Sports utility vehicle, Multi utility vehicle, Light commercial vehicles, Medium commercial vehicles & Heavy commercial vehicles.

• Cylinder Bore Sizes : 48, 51 & 54 mm (13” & 14”)
• Pad Materials : NAO & Low steel non-asbestos
• Types : Collete & Collete reverse types (CL & CR Types)

Function of the front end exhaust system is to reduce the engine noise and process the emission quality levels to required customer requirements and Euro norms effectively containing atmospheric pollution.

Faurecia Emission Control Technologies has emission control technologies that is customized to suit customer needs on performance and durability.

• Better Addition Non Asbestos paper
• Compressed non asbestos
• Rubber Coated Steels with NBR, FKM, ACM polymers
• Molded rubber on Edge of Aluminum or Steel carrier
• Printed Elastomers (Epoxy & Silicones) on various substrates
• Engineered substitutes to Liquid sealants

Henko Stain Champion Bar is a detergent bar that even removes tough, dry stains from laundry. Powered by German technology with 'Oxygen Power', Henko Stain Champion Bar totally removes even deep down tough stains like dried up oil and stubborn dirt on cuffs and collars.

Axles for Light Commercial Vehicles, Sports Utility Vehicles & Multi Utility Vehicles are one of the most significant products offered by the Company. It has a combined manufacturing capacity of 300,000 Axles/year for both Salisbury & Banjo designs. The company is pioneer for manufacturing & supply of Banjo design axles for these vehicles.

Saves up to 30 percent in packaging depth without affecting performance
This results in weight savings of up to50 percent
Tube and fin geometries optimized using CFD tools
Material thicknesses reduced in cars
Optimized manufacturing technologies
Use of new materials such as high-tensile aluminum alloys

The slack adjuster assembly is mounted on the 'S' cam shaft and one end is connected to the push rod of the brake chamber. When the brake pedal is pressed, the air is let into the brake chamber and pushes the push rod out. This in turn moves the slack adjuster assembly. As slack adjuster assembly is mounted on the 'S' cam shaft, the shaft rotates and forces the brake shoes away from another and presses against the brake drum & the brake is applied.

Thus the basic function of this product is to convert the linear motion into the rotary motion of S cam.

When the gap between the brake drum and the brake lining is increased due to the brake lining wear; the slack adjuster assembly hexagon (adjusting nut) is rotated manually so as to rotate the ‘S’ cam and adjust the gap between brake drum and the lining.

Faurecia Emission Control Technologies offers unique solutions to non-conventional applications in the automotive and the non-off road segments.

Faurecia Emission Control Technologies has been able to serve the industry with cost and weight competitiveness to meet the challenges of fuel economy and material cost.

Cast using Green sand moulds in Stack moulding process
Double disc ground
Reaming & Countersinking on bolt holes
Key Characteristics
1.Flatness - 65 microns Max.
Applications:

• Oil pump covers
• Cam thrust Plates
• Valve Body Covers
• Back Plates for Brakes

Pril Liquid dishwash was relaunched in Mar 2009 as Pril Perfect with new formulation of Triple action which gives 3 benefits:

1. Degreasing – Removes toughest grease
2. Deodorizes – Removes residual food odour
3. Disinfects – kills 99.99% germs

It cleans dishes beyond the visibly clean dishes, which is not just looking clean but also smelling clean along with anti bacterial properties which kill 99.99% germs.

Automatic Brake Adjuster is one of the most critical items in any air brake system. It is used on commercial vehicles having Air Brakes with 'S' cam shaft. The basic function of brake adjuster is to transmit the braking torque to the 'S' cam and to facilitate adjustment of the clearance between brake lining and the brake drum which is caused due to the wearing of brake lining.

The automatic brake adjuster is mounted on the 'S' cam shaft and one end is connected to the push rod of the brake chamber. When the brake pedal is pressed, the air is let into the brake chamber and pushes the push rod out. This in turn moves the adjuster. Since, it is mounted on the 'S' cam shaft, the shaft rotates and forces the brake shoes away from another and presses against the brake drum. Thus the brake is applied.

A choice of different climate styles
Variable footwell temperature
Airflow volumes individually adjustable for driver and front-seat passenger Hence
High cool-down/warm-up performance
Low noise level
Optimum air distribution

Hot end product design is critical to effectively utilize the close coupled catalyst substrate in the treatment of the exhaust gases at maximum efficiency. Faurecia Emission Control Technologies has rich experience in design engineering and is the preferred supplier to major OEMs worldwide.

• Non Asbestos Composites
• Steel plate with rubber elastomer moulded onto metal edge
• Multilayer steel
• Graphite composites
• Multi layer graphite

• Better Addition Non Asbestos paper
• Compressed non asbestos
• Rubber Coated Steels with NBR, FKM, ACM polymers
• Molded rubber on Edge of Aluminum or Steel carrier
• Printed Elastomers (Epoxy & Silicones) on various substrates
• Engineered substitutes to Liquid sealants

Diameter: 25mm to 160mm
Axial Width: 0.8mm to 6.5mm
Material:

1. Gray cast Iron.
2. Low Carbon Moly.
3. Ductile Iron in 3 Grades.
4. Steel: SAE 9254, SMX 90.

• Single layer metals – CRCA/Aluminum/Steel
• Sandwich of metal & thermal insulation with wrap around edges for acoustics
• Typically used for exhaust manifold, turbo charger, intercooler and muffler.

Compact 2000 Series is a new generation series propeller shaft for heavy commercial vehicles ranging from 25T to 49T. It provides additional features & advantages like extended life, reduction in weight, increased torque carrying capacity & durability & improved NVH.

Drum Sizes:

• 180mm x 30.0mm (L/T)
• 180mm x 35.0mm (L/T)
• 200mm x 38.0mm (L/T)
• 279mm x 50.8mm (L/T)
• 279mm x 50.8mm (2L)
• 168mm x 30.0mm (D/S)

• Cylinder Bore Sizes : 30 & 34 mm
• Pad Materials : NAO & NAO & Low steel non-asbestos
• Types : Drum in Hat (DIH), Parking Integrated Caliper (PIC)

• Booster Sizes : 7", 8", 9" & 10"
• Booster Ratios : 4:1, 5:1, 6:1 & 7:1
• Master Cylinder Sizes : 20.64, 22.22 & 25.4mm
• Master Cylinder Types : AS/AS, AS/TC & TC/TC

IPRT is the reinforcement panel that holds the front plastic panel housing Clutch Mounting, Brake mounting, AC mounting, Audio/Video etc.

Faurecia Emission Control Technologies has the inspection and quality capability to hold the tolerances on this multi-weld assembly ensuring 100% delivery and 0 PPM.

Various forms of underbody catalytic converter assemblies are designed and manufactured in India and worldwide. Faurecia Emission Control Technologies is versatile in designing the subsystems keeping in mind the geographic impacts on the durability and performance, and optimizes the design for cost and quality.

Bimetal controlled Visco® fan
Areas of application: cars, vans/delivery trucks and heavy trucks
Continuously controlled fan speed
Robust design

Electronically controlled Visco® fan
Areas of application: SUVs, vans/delivery trucks and heavy trucks
Continuously controlled fan speed
Output optimally adjusted to meet actual cooling demand
Reduced drive power
Optimum noise characteristics

Faurecia Emission Control Technologies designs and manufactures entire emission control solution-system- designing from engine outlet manifold to the rear muffler assembly. We design and virtually validate the components/sub-systems to optimize design, maximize performance and durability

The Haldex Consep offers the fleet operator, a viable solution to the contamination of the air brake systems through oil, dirt and water carryover from the compressor, which inevitably causes failure to valves and brake system component. The simple design of Consep allows for easy installation by either OEM or fleets looking too retrofit a solution to their current vehicles. Whilst some vehicles now provide for the installation of an air drier to alleviate some of the problems associated with poor air quality, (namely water condensation and oil being thrown by wearing compressors), these driers require the additional ongoing cost of replacing desiccant cartridges. Consep removes up to 90% of any water content, removes oil and dirt components and does not require any cartridge replacement.