We are one of the most trusted names in manufacturing car washers for automobile service station, industrial & agriculture and horticulture. These car washer comprise following benefits:

• Minimum maintenance
• Very easy to Operate
• Energy and water saving

We are a trusted name in manufacturing air compressor, which are fully balanced and absolutely simple in operation. Our air compressors are provided at superior quality and considerably cost effective prices. These further comprise following features:

• Vibration free
• Quiet operation
• Easy accessibility of spares at economical prices
• A rugged cast iron design, suitable for heavy duty and continuous operation

Our air compressors are available in two types, which are:

Anand Single Stage Air Compressors:
0.5To7.5Hp.-2.00To32.00cfm

Anand Two Stage Air Compressors:
3.0 To 30.0 Hp. - 9.00 To 112,00 Cfm

Our unique water recycling plant for vehicle washing is very well incorporated with integrated treatment system for efficient removal of oil,fuel,filterable solids, readily settable solids and other contamination from water. We have provided advanced technology in design so that it can be easily reusable and also meets requirement of pollution regulatory bodies. The product has been designed in such a manner that it requires minimum space and can be installed at the existing washing area of automobile service centers. Being cost effective it also comprises more advantages such as:

• Waste water from vehicle washing is collected, treated and reused for vehicle washing.
• Plant runs on auto cycle and does not require manual intervention.
• Rigid single skid design requires no foundation.
• Highly cost effective in terms of water procurement where water is scarce.
• Reduced wastage of water
• Makes the setup a Eco-friendly venture following "save water save nation".

Construction Of Plant:

• MS fabricated construction with epoxy coating - internal and external.
• Single skid construction. foundation not required.
• Electrical control panel mounted on plant.
• Automatic cycle operation. manual mode also provided.

Training:
We are providing intensive training to our employees. This training is given at the time of at the time of installation. As such we do not require skilled manpower.

Testing:
The composition of input & output water of the plant is tested after installation & commissioning at government approved laboratory.

We are a known name in producing two wheeler lift and hydro electric service lift /ramp which are highly safe in use and require minimum maintenance. Further our efficient equipment comprises the following features:

• Specially designed for two wheeler servicing.
• Special care has been taken while designing and manufacturing for improved performance & servicing.
• Features ultra modern look which is its added value and provides elegance to working area

Following are its technical specifications:

Type	Scissor Type	Parallelogram Type
Top Frame	M.S. Rectangular 50 X 25mm Tube	M.S. Rect. 50 X 25 mm Tube
Top	Stainless Steel Checkered Or M.S. Sheet	Mild Steel Sheet
Bottom Frame	M.S. Rectangular 50 X 25mm Tube	M.S. Square 45 X 45 mm Tube
Top Frame Size	1950 mm X 570 mm	1780 mm X 500 mm
Bottom Frame Size	1944 mm X 564 mm	1914 mmx 542 mm
Minimum Closing Height Height	110 mm	200 mm
Maximum Opening Height	840 mm	750 mm
Paint	Powder Coated	Powder Coated
Operating System	Hydraulic Power pack	Hydraulic Power pack / Hand Pump
Power	1 HP Single Phase/3-Phase	1 HP Single Phase/3-Phase
Safely Lock	Manual Locking & Manual Release	Manual Locking & Release
Lifting Capacity	200 Kg.	150 Kg

Our hydro electric three wheeler lift which requires minimum maintenance and is highly safe in use. These efficient service lifts consist of the following features:

• Specially designed for three wheeler servicing.
• Great care has been taken while designing and manufacturing for improved performance & servicing.
• Has ultra modern look
• Economical
• Long lasting
• Highly reliable

Following are its technical specifications:

Type	Hydraulic-Scissor Type
Capacity	750 Kgs
Max. Lifting Height	1250 mm
Min. Closing Height	175 mm
Opening Height	1200 mm {over all)
MS Fabricated Hydraulic Operated Lifting Platform With Supporting Fixture
Power Pack with Oil Tank Of 15 Liters Integrated With Hydraulic Gear Pump Solenoid Operated DC valve With Manual OverridePush Buttons For Operation 1 Hp Single Phase Motor or Three Phase Motor

We are offering hydraulic washing lift and pneumatic three Wheeler washing lift which has a maximum capacity of 1000 kg. This product is absolutely reliable and safe in use. Our equipment is very ergonomically designed as a result it puts an elegance to the working area. Following are its technical specifications:

Capacity	1000 Kgs maximum
Lifting Height	1500 mm
Min. Closing Height	140 mm
MS Fabricated Hydro Pneumatic Operated Lifting Platform
Hydraulic Cylinder With Hard Chrome Plated Piston Rod.
Piston Rod Of 165 mm Diameter x 1500 mm stroke
Hydro Pneumatic Tank With Oil Capacity Of 50 Litres

We are a known name in producing mechanic tools trolley which consists of 4 trays and 2 drawers. These trolleys further comprises following features:

• Handles provided from both sides
• 4 Castor wheels
• Available in size of 590 mm* 350* mm * 840 mm height

Our concern is a recognized name in manufacturing highly qualitative tool & accessories hangers for various industrial usage. Along with our tool hangers, we are providing other accessories of pneumatic automation such as impact wrench, hose reel, coiled hose, lubricator, blow gun etc. This equipment is available in size of 35 mm * 35 mm square pipe frame.

We are offering qualitative pneumatic grease pumps which are perfectly suitable for specific lubricating requirements. The pump is specially designed with minimum moving parts so as to make it long lasting and absolutely trouble free operation. Further, it comprises the following physical aspects:

Swivel Arrangement :-

• The swivel arrangement at both ends of hose for easy movement of the grease pump.
  Pressure Plate:
• The pressure plates are provided to ensure easy flow of grease thereby making it extremely convenient to use.

Wheels :-

• Wheels are provided in all models for easy mobility.

Hose :-

• 2 meter high pressure wire braided hose with 6.3 mm I.D.& hydraulically crimped at both ends.
• Drum capacity up to 50 Kg.

Following are its technical specifications:

MODEL	AGP 50	AGP 25
DRUM CAPACITY	50 KG	25 KG
OUT PUT AIR PRESSURE APPROX	300-400 gm / min	300-400 gm / min
WORKING PRESSURE RANGE OF AIR	4-10 kg / cm2	4-10 kg / cm2
RECOMMENDED WORKING PRESSURE OF AIR	8 kg / cm2	8 kg / cm2
NORMAL BLOCKED PRESSURE	400 kg / cm2	400 kg / cm2

The other kind of grease pumps available from our end are hand operated grease pumps. This type of grease pump is applicable for specific lubricating requirements. The pump is specially designed with minimum moving parts so as to make it long lasting and absolutely trouble free operation. Further, it comprises the same features as the pneumatic has:

Swivel Arrangement :-

• The swivel arrangement at both ends of hose for easy movement of the grease pump.

Pressure Plate:

• The pressure plates are provided to ensure easy flow of grease thereby making it extremely convenient to use.

Wheels :-

• Wheels are provided in all models for easy mobility.

Hose :-

• 2 meter high pressure wire braided hose with 6.3 mm I.D.& hydraulically crimped at both ends.
• Drum capacity up to 20 Kg

Following are its technical specifications:

MODEL	AGH20	AGH10	AGH5
DRUM CAPACITY	20 KG	10 KG	5 KG
OUT PUT AIR PRESSURE APPROX	3 gm / stroke	3 gm / stroke	3 gm / stroke
WORKING PRESSURE RANGE OF AIR	-	-	-
RECOMMENDED WORKING PRESSURE OF AIR	-	-	-
NORMAL BLOCKED PRESSURE	140 kg / cm2	140 kg / cm2	140 kg / cm2