Honing Guide

We are the largest manufacturers of Edge Honing Guides & Attachments in India. These products are achieved by following the marker on the angle marking scale attached to the guide. The free movement of tool is ensured by the steel, which allow unrestricted movement over the entire oilstones surface. These are made up of high quality grey iron cast bodies. These are widely available in the market.
Materials

    * Body:Alloy Aluminum
    * Free Rollers:Best quality Steel

Finishing
Roller & Knurled wheel:Chrome Plated
Body & Angle Strip:Painted, Black

Packing
Individually cartoned in a display box of Six

Edge Honing Guide	Width of Grip
& Attachment No.	Iron in mm
A 50 (fo 45mm to 60mm)	45 to 60
A 51 (For spokeshave cutter)	54
A 051 (for spokeshave cutter)	45

A simple to use tool for honing plane irons which can be set to produce the correct cutting angle. This angle is achieved by following the marking on the angle marking scale attached to the guide. Plane iron is tightened on the top with the knurled screw. The free movement of the tool is ensured by the steel roller which allows unrestricted movement over the entire oil stone surface.

to make the extra use of the guide originally made exclusively for honing the plane irons of the carpenter's adjustable iron planes such as: smoothing, jack, fore and the jointer planes, the attachment suitable for holding and honing the plane iron of the spoke shave planes are introduced, as depicted above.

materials

    * body: alloy aluminum
    * free rollers: best quality steel


finish
roller & knurled wheel:chrome plated
body & angle strip: power painted black

packaging
individually cartoned in box

Edge honing guide	width of plane
& attachment arts no.	iron in mm
A 55	45 to 60
A 56	54
A 57	45

A simple to use tool for honing the plane irons of different models of the carpenter's iron bench planes such as planes, block planes, plough planes, spoke shave, finish chisels and the mortise of width ranging from 3mm to 65mm. The plane irons and the other cutting tools are gripped from black both the sides between the two simultaneously movable & reversible jaws of the guide and tightened on the top by packing the knurled screw clamp to strongly hold the tool in its individually packed inacarton box. Position while honing.
the knurled screw clamp can be used in two positions
(forward & backward) provided in the guide.

the simultaneously movable (outward & inward) jaws of
the guide are operated by rotating (clockwise & anti clockwise) the knurled screw head of the left & right
hand thread screw, underneath the guide.
the honing guide is freely movable on the steel rollers
made of good quality steel.
the correct honing angle of 30° and the sharpening angle of 25° of the cutting tools is achieved by shifting the roller at the rear end of the guide to its respective position to 30° & 25° marked on the guide.

materials

    * body: alloy aluminum
    * free rollers: best quality steel


finish:

    * roller & knurled wheel: chrome plated
    * body & angle strip: power plated, black

Arts no.	Width of grip
	in mm
A 58	3 to 65