Anantha Coating Solutions

'Unbelievable', that's what restorers say when they see a demonstration of this incredible Epoxy Putty product.

It's so strong you can drill and tap it, yet gentle enough that you can apply it with your bare fingers.

And since it's Water Based, you can simply wet your fingers, and work with it until it is almost perfectly smooth before it dries - eliminating most sanding! But when it cures, it's Rock Hard, making it perfect for repairing steel, plastics, concrete, etc. Amazingly, it even sticks to damp surfaces, and will cure Underwater, so it can be used to fix leaking basement walls, swimming pools, plumbing fixtures and so much more. Put some Epoxy Putty in your toolbox today. You'll find yourself using it all over your shop and home.

For years we've been working on a product to repair cracks, pits or holes in exhaust manifolds, tailpipes, mufflers, or other components subjected to high temperatures while in use. Because replacement parts are often difficult or impossible to find, there is a real need for this type of product in the marketplace. Fire Seal 2000™ is a single-component (no mixing required) ceramic and stainless steel-filled putty that is resistant to fuels, oils, and corrosives. After it is fully cured, it will withstand temperatures up to 2000°F. Fire Seal 2000™ may be applied to rough-surfaced or sandblasted steel, stainless steel, or cast iron.

Instructions: Use a putty knife, small trowel or spatula to apply. Curing: Let Fire Seal 2000™ dry for 16-24 hours. Begin final cure by idling engine for 10-15 minutes at a time. You may sand Fire Seal 2000™ after it is fully cured, using a file or medium grit sandpaper. Do not use any lubricants for machining, but always use a dust mask to avoid inhaling the sanding dust.

POR Patch™ is, quite literally, POR-15 in a tube, and like POR-15® it dries as hard as a rock, remains flexible and once dry is totally impervious to fuels and solvents.

For tough applications use the toughest filler: RestoGrip!

RestoGrip Body Filler is specifically designed for applications that require more strength, such as bridging holes, or filling high-stress areas. RestoGrip Body Filler is loaded with tiny polyester fibers, which makes it many times stronger than ordinary body fillers. Use RestoGrip with POR-15, to make permanent repairs to rust holes or deep pits in steel or galvanized steel. Then, use Straightline Body Filler to finish off the repair for the ultimate smooth final finish.

Now you've got the superior body fillers you always wanted, engineered for use with POR-15. Try them for yourself! After you've worked so hard on your car, does it make any sense to use an inferior body filler that costs a few bucks less? Both Straightline and RestoGrip are supplied in special tins which house the body filler in the bottom and the re-sealable hardener in an insert tray on top....no separate tubes to lose.

Take advantage of special savings when you buy these two products together.

 

You'll Receive:

 

• Quart of our U.S. Standard Fuel Tank Sealer
  
• Quart of PREP & READY^TM

 

Special - Quart of Fuel Tank Sealer & Quart of Prep & Ready^TM.

Our new body fillers stick to POR-15 Rust Preventive Paint like nothing you've ever seen! They are formulated especially for application and use with POR-15 Rust Preventive Paint, and are manufactured exclusively for POR-15 Inc. We guarantee you'll say they're the best you've ever used or your money back....period! Yes, they're more expensive than fillers you can buy locally, and not by just a little... but if you've used body filler before, try ours; you'll know at once you've made a great buy. If you're a first-timer, ours are the easiest to use body fillers made anywhere.

Straightline Body Filler has over 30% more resin than other fillers, which gives it much greater adhesion. This makes it the perfect choice to apply over POR-15. Straightline has ultra fine particles for perfect feathering of edges, and is manufactured under vacuum, which eliminates those pesky air holes you've experienced with other fillers. It's more flexible, tougher, and able to tolerate higher temperatures than other fillers (you can even use it in a bake oven!) Use Straightline Body Filler for steel, aluminum, galvanized steel, fiberglass, and many plastics.

U. S. Standard fuel tank sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new stage ii fuels which have a high alcohol content. It has superior strength and fuel resistance, and does not contain methyl ethyl ketone, a highly flammable and deadly carcinogen (cancer-causing). u. S. Standard fuel tank dealer is non-flammable and is environmentally safe.