Various grades of piston rings / wearing rings for IR and Kirloskar compressor are available with us in ready stock. We can supply all types of piston rings and guide rings following material of construction:

• Cast iron
• PTFE
• Thermoplastic

Our range can be customized as per the specifications, drawings or samples provided by our customers.

Salient features of our array include:
 

• Perfect roundness
• Spring tension as per the applications
• Long life

 
Our piston / wearing rings are used in lubricated and non lubricated compressor units. For lubricated compressor we have individual cast iron piston ring that has 45^o angle cut / glass filled PTFE. For non lubricated unit, our range is available with thermoplastics, carbon filled PTFE and Bronze filled PTFE.
In addition, we also offer unloader piston rings, in glass filled PTFE and Bronze Metallic rings.

Different sizes and models of piton rod and oil scrapper ring for IR and Kirloskar compressor are offered by us. Having good tensile strength and mechanical properties, our durable piston rings are:

• Heat treated
• Grounded to close finish, to increase the life of Oil Scrapper Rings & packing rings

These have fine threads along with close pitch on both ends (crosshead side / piston side). This ensures better top / bottom clearance. We can also provide plasma coated piston rods as per the requirements & specifications of our clients.
 
Having perfect roundness, oil scrapper rings are offered in following material of construction:

• Individual graded cast iron
• Bronze
• Glass filled PTFE

These rings are inner grooved and drilled to completely wipe out oil from the piston rod. The rings come with SS garter spring having proper tension.

Highly suitable for different diameters of piston rods, Ring & Spring Packing sets are offered in various material of construction such as:

• Metallic segment
• Carbon filled PTFE
• Bronze filled PTFE
• Glass filled PTFE
• CI backup rings

To ensure that it seals the air/gas pressure, the ring and spring packing sets are offered in:

• 3 piece
• 6 piece
• Segmental
• Radial cut
• Tangential cut segment with garter spring

 
We also offer these sets for high pressure units along with metallic back up rings.

Leveraging on our industrial expertise, we offer horizontal as well as vertical air receivers in customer specified configurations. These are designed according to IS 2062 and are categorized as per different sizes.
 

Vertical Air Receivers
CAPACITY Ltrs	APPROX  Cu Ft	CAPACITY cum	SIZE Dia (inch) x HT (ft) x Thickness (mm)
300	9.7	0.275	18” x 6 ft x 5 mm
500	17.8	0.5	24” x 6 ft x 6 mm
1000	33.5	0.95	30” x 7 ft x 6 mm to 8 mm
1600	57	1.6

Sourced from some of the leading names in their definite field of operation, suction air filters and oil filters for IR and Kirloskar compressor are offered in customer specific configurations. Our suction air filters find usage in air cooled compressor and water cooled compressors for I/R & KPC. These air filters are available in ex-stock with us, as per the OEM Specifications.

 We also offer:

• Panel filters with silencers having 5 micron efficiency
• Paper filter element with 25 micron efficiency
• Complete filters with body

For the aforementioned compressors, we also offer a complete range of oil filters that are in ready to shipment mode.

We offer an assortment of pistons and cylinders for IR and kirloskar compressor in customer specified configurations. Our pistons are developed using graded cast iron & aluminium alloys along with perfect machining. Ready stocks of our range are available for:

• Aircooled compressors
• Watercooled compressors
• Lubricated type & non lubricated type of units

The pistons are also offered by us in their original specifications, dimensions and material of constructions. Use of graded cast iron to manufacture cylinders that too in OEM specifications, makes it ideal for use in all:

• Aircooled compressors
• Watercooled compressors
  

The bore and length of these cylinders is sustained as per OEM to ensure stroke and air/gas flow along with performance of the unit. Some of the construction features of our range include:

• Perfectly bored & honed on vertical boring machine and honing machine
• Correct & permissible tolerances
• Top/bottom surfaces are duly ground & drilled with proper fixtures to ensure proper assembly with related parts

Our team of procuring agents ensures to source only the best quality connecting rods for IR and Kirloskar compressor. These durable connecting rods are offered in various material of construction, MOC, of aluminum, SG iron & forging and leaded bronze. Their salient features include corrosion resistance, high tensile strength and dimensional accuracy. We carry an ex-stock of connecting rods, which is ready for shipment. This way, we can easily fulfill the bulk orders of our clients.
 
Construction features of our connecting rods:

• Machined on both sides
• Centre distance between big end & small end is maintained to ensure perfect straightness & perfect boring of big end & small end
• Big end & small end are perfectly bored to match original clearances with steel bush for air cooled unit & aluminium / bronze floating bushes for water cooled unit
• Forged connecting rods are drilled internally to maintain lubrication & oil pressure of unit.

We offer a range of cross head for IR and kirloskar compressor to our clients, as per drawing or samples provided by them. Our cross heads are used in the water-cooled unit. Having MOC of individual aluminium alloy casting, the cross heads have following characteristics:

• Fully machined with proper tolerance
• Clearance is maintained between crosshead and guide (dist piece)
• Possess fine pitch to match the thread with piston rod
  

We also provide different pin cross heads that have steel as their MOC. These possess a hardened ground and hollow from inside to ensure proper oil pressure of the unit. Some of the construction attributes of our durable pin cross head are as follows:

• Both ends of pin are grooved for locking arrangement by retainer ring
• Outer surface of pin is drilled on equal distance to match the hole with bronze X-head pin bush
• Both ends are closed; one by cap & other by plug
• Perfect tolerance is maintained to slide feet in crosshead bore

When it comes to durable valves and valve parts for IR and kirloskar compressor, then we are the first choice of our clients. We offer 2 types of channel valves, round and rectangular. These find usage in reciprocating type compressors for lubricated / non-lubricated type of units. To utilize utmost flow and ensure perfect sealing,

 The product has exclusive designs of:

• Valve seat
• Stop plate
• Plate seat
• Channel and Spring set.
• Wear Strip.
• Type 30 Valve.
• Inlet Valve and Discharge Valve.

Holder guide (metallic) are machined with OEM tolerance. This can considerably improve the valves’ life. The plate seats have MOC of stainless steel and are heat treated and perfectly micro finished on both side & lapped.

We also offer finger valve / concentric valve assembly / valve parts to our clients. Our valve seat, stop plate & valve bolts conform to OEM specifications. The concentric valves available with us are ready for shipment.

The valve plates are appropriately heat treated and Micro finished ascertaining leak proof valve assembly. In addition, spring plates, finger valves and spacer plates are also heat treated, grounded & engineered to ensure highest operating efficiency against high temperature and pressure of the unit.

We carry a comprehensive range of gaskets, oil seal and o rings for ir and kirloskar compressor which is available ex-stock for prompt shipment. Our ‘O’ rings are used for I/R & KPC compressors and are available in various material of constructions such as:

• Neoprene
• Viton
• Nitrite
• Silicon rubber

Our array has standard thickness and roundness as per the OEM specifications. The gaskets are available with us in different sizes and are used for I/R & KPC compressors.

Their materials of construction include:

• Asbestos
• Non asbestos
• Spiral steel
• Ring gasket of solid copper/solid aluminium
• Copper asbestos
• Aluminum asbestos

Offered in proper standard thickness & roundness, these are available in ex-stock with us. Moreover, we also carry a spectrum of standard oil seals with S.S. spring to grip with various sizes of I/R & KPC compressors.

Known for their durability and dimensional preciseness, M.B. housings are offered by us in standard as well as in client specified configurations, drawing or samples. These are widely used in various compressors and highly appreciated for their corrosion resistance, ideal tolerance and long service life. The quality of our main bearing housing for ir and kirloskar compressor is ensured during their stocking in our warehouse, which enables us to meet the bulk and immediate demands of our clients, within the stipulated time frame.

Popular for its durability and rust resistance, crank pin bushes for IR and kirloskar compressor are available with us in ex-stock mode for prompt shipment.

Our steel bushing is used in air cooled compressors and is appreciated for its features of:

• Proper heat treatment
• Maintained tolerances with internal / external grinding and smooth / shining surface
• Internal surface matches the dimension of crank pin with easy hand press sliding & external surface with big end of connecting rod to ensure easy assembly

 
We also offer aluminum main bearings / crank pin bushings that are known as full floating bearing bush and find usage on forged crankshaft for water cooled units.
 
Our aluminum main bearing bush is in one piece having an axial cut and has the capability of carrying radial as well as thrust load. Crank pin bush (two halves) is a precision bush that does not require any adjustment. All our bearing bushes are developed from perfect composition with aluminium ingots. These are heat treated and complete machined with groove in center. These are also drilled to make oil film for perfect lubrication & retaining correct oil pressure.

One of our most popular compressors spares parts, outer head / frame head for IR and kirloskar compressor can be availed from us in both standard and customized configurations, as per the definite demands of our clients. These heads possess features of simple to install, corrosion resistance, ideal tolerance and high tensile strength. To meet the bulk and prompt demands for the outer heads / frame heads, we possess a well managed warehousing facility.