IndiaMART.com
Indiamart

  • Anuj Steel Centre

    Kolhapur, Maharashtra

  • Year of Establishment: 1990
    IndiaMART Member Since: 2010
    Products [19]

    Mobile: +(91)-9422520381

Products

Colour Coated Insulated Sandwich Panels

Colour Coated Insulated Sandwich Panels

Usage of Sandwich Panels in our country is not new. Currently majority of them are used in cold storage industry for walls and ceiling insulation. Conventionally the sandwich panels are produced manually or on a small press (discontinuous line) in India. While the cost of initial investment for these methods is low, the consistency of the quality of the panel is big question mark besides the problem of low capacity of production. Perhaps this has been the reason for the poor consumption of Sandwich Panels in our country despite of its excellent thermal and acoustic insulation properties.

Sandwich panels are two steel/aluminium sheets with polyurethane foam a core material. The picture below shows such panel:

Gp & Gc, Crc Sheets

Gp & Gc, Crc Sheets

BHUSHAN has set up the technology of manufacturing a very new coated product called BHUSHAN GALUME being the brand name. This alloy coating consists of 55% Aluminum and 43% Zinc and the balance contains Silicon around 1.5% to affect excellent adhesion to the steel substrate.

Pre-Painted Gi & Galume Trapezoidal Profiled Steel Sheet

Pre-Painted Gi & Galume Trapezoidal Profiled Steel Sheet

• Overal sheet width before profile is 1220 mm (+/-10)
• Overal width after profile is 1030 mm (+/-10)
• Effective covered width is 930 mm (+/-5)
• Pitch is 186 mm (+/-2)
• Depth 32 mm (+/-2)
Add 4 th product from brochure (galume wall cladding)
Add technical information from brochure from standard colors to available length blocks

Galume Wall Cladding Profile Steel Sheet

Galume Wall Cladding Profile Steel Sheet

•Actual Supply Width:1108 mm
•Effective Width : 1060 mm (+/-10)
•Pitch is 106 mm (+/-2) ,
•Depth 10 mm (+/-2)

Pre-Painted Gi & Galume Tile Profiled Steel Sheet

Pre-Painted Gi & Galume Tile Profiled Steel Sheet

• Overal sheet width before
profile is 1120 mm (+/-10)
• Overal width after profile is 980 mm (+/-10)
• Effective covered width is 888 mm (+/-5)
• Pitch is 178 mm (+/-2)
• Depth TP1 is 27 mm (+/-2)
• Depth TP is 2.5 mm (+/-2)
• Length of step is 203 mm

Pre-Painted Gi & Galume Trapezoidal Profiled Sheet

Pre-Painted Gi & Galume Trapezoidal Profiled Sheet

• Overal sheet width before profile is 1220 mm (+/-10)
• Overal width after profile is 1070 mm (+/-10)
• Effective covered width is 1010 mm (+/-5)
• Pitch is 250 mm (+/-2)
• Depth TP1 is 30 mm (+/-2)
• Depth TP is 2.5 mm (+/-2)

Aluminium Roofing Sheets

Aluminium Roofing Sheets

Everlast, a Hindalco brand launched in December 2002, is made of aluminium and is ideal for all roofing and cladding needs. It is easy to use, durable and economical to work with. Using aluminium for roofing has many benefits. Among these are the following:

Aluminium roofing sheets are extremely light and have a high strength-to-weight ratio. Aluminium is an increasingly popular choice for use in installations and buildings. It is corrosion-resistant in almost any kind of environment. Even in highly corrosive industrial environments, it is resistant to fumes and vapours of organic compounds and to chemicals like ammonia, carbon dioxide and acids such as hydrochloric acid, nitric acid and sulphuric acid. Such corrosion resistance gives the metal a long life and keeps it looking good throughout its life.
The shine and brightness of aluminium livens its surroundings, and, because it doesn't stain, discolour or rot, it keeps its brightness and shine for a long time. Aluminium corrugated sheets can take a variety of finishes, colours and textures, which protect them and further enhance their appearance. An alumunium structure can be easily dismantled, transported and re-assembled in a new location. Though the metal is a good conductor of heat, its high reflectivity for radiant heat and light (75 to 80 per cent when new, 60 per cent after several years) keeps the interiors of aluminium building from five to eight degrees celsius cooler in summer, while its low emission rate cuts heat loss in winter. It is easy to maintain and wash.

Aluminium Sheet Flat Rolled Products

Aluminium Sheet Flat Rolled Products

Hindalco are India's largest manufacturer of the entire range of flat rolled products. Our aluminium sheet is produced from our own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances.

Hindalco’s rolled products are widely used in various segments such as Insulation, packaging, transportation, building and construction, electrical, defence and general engineering applications.

Our commitment to quality and service, along with extensive infrastructure, has made us a prime source for best-selling brands. Continuous improvements in manufacturing processes, practices and systems ensure that customers' needs and expectations are fully met.

We ensure efficiency and product quality by using state-of-the-art equipment and a strong research and development setup, supported by dedicated and motivated employees and the Oracle ERP system. Wagstaff Air Slip? slab casting technology is used to guarantee consistent quality and surface finish of stock feed, which in turn ensures quality finished products. Hindalco's cold rolled coils are precision-finished to match international standards. They have good shape, high tolerance, versatility and blemish-free surfaces. They are used in commercial and general engineering applications such as bus bodies, cladding and fan blades.

Sds Screws

Sds Screws

Tender Specifications of Self Drilling Screws RX Self Drilling Screws Drill their own hole and taps the thread and hold the metal roof to the Secondary membrane. The Screws provide high pullout strength, shear strength & maximum thread engagement and positive fastening in structural steel.
Self Drilling Screws Meeting the Australian & International Standard AS3566 Class (March 2002) which details as follows:

  • Salt Spray Test Certificates (ASTM B117) for 800 Hrs.
  • 15 Cycles of Kesternich Test in accordance to DIN 50018.
    (Condensing the atmosphere containing Sulphur dioxide at level SFW 2.05.)
  • Relative Humidity in accordance with ASTM
    D2247 for 1000 Hours.
  • Test Cycle of 4 Hours of Ultra Violet Radiation as per ASTM G154 for 2000 Hrs.

Colour Coated Coil

Colour Coated Coil

Introduction:
Coil coating is the most advanced techniques used in the continuous application of an organic coating on to a flat metal substrate in the coil form
Coil Coating Process:
• CLEANING OF SHEET
• CHEMICAL COATING
• DRYING
• PRIMER APPLICATION(ON BOTH TOP &BOTTOM)
• CURING OF PRIMER
• TOP COAT & BACK COAT APPLICATION
• CURING OF TOP & BACKING COAT
• GUARD FILM APPLICATION

Gc Sheets

Gc Sheets

durashine™ is a range of coated steel products offered by tata bluescope building products. The range of products is expected to fulfill the need galume production technology:
of retail customer by offering them with amazing aesthetics, excellent thermal efficiency and exemplary colour durability in coated steel product.
product range includes: durashinetm roof, wall, steel tile roof, purlin, & typical accessories standard thickness-alluminium-zinc coated/thickness 0. 45 mm / sheet length – 2. 44/3. 05/3. 66/4. 27/4. 88/6. 1 mtr. / supply width 1072 mm/covered 1015 mm.

Polycarbonate Sheet Sunlite Make

Polycarbonate Sheet Sunlite Make

SUNLITE Multiwall Polycarbonate Sheet combines the characteristic strength of polycarbonate with superior insulation and powerful physical properties. Ideal for noncorrosive industrial structural roofing and siding, and a multitude of Do-It-Yourself applications in view of its high impact strength and wide service temperature range. The combination of powerful physical properties and superior insulation yields a very durable sheet for varied roofing, cladding, and glazing.

Features and Benefits

  • Superb thermal insulation - energy saving
  • Lightweight and impact resistance
  • High light transmission
  • Weather and UV resistant benefits
  • Blocks virtually all UV radiation
  • Easy to handle and install
  • High fire performance rating

Embossed Sheet

Width 0.914mtr, 1.22mtr, 1.52mtr, 1.83mtr
Length (1mm to 3mm)
Length (4mm to 6mm)

2.44mtr, 15mtr, 31mtr
2.44mtr
Color
Clear, Blue, Green, Brown

SUNLITE™ Embossed sheet is a translucent product that provides excellent light diffusion. Its textured surface is ideal for private glazing with all the advantage of polycarbonate sheet.

Sheets & Onduvilla Tiles

Onduline sheets are manufactured by impregnating organic cellulose fibres with bitumen under high temperature and pressure. The sheets are pre pigmented with special purpose resins. The impregnation of colour into the sheets is done using patented techniques that enable the sheets to retain their colour over a longer period of time even under harsh conditions. The patented manufacturing process ensures uniform bitumen penetration into the sheets providing an excellent dimensional stability to the product and thereby preventing delamination.

Onduline sheets offer the following benefits:
Excellent waterproofing characteristics,Can be used in extreme climatic conditions High insulation and sound absorbency values,Resistant to corrosion-does not rust, rot or become brittle Light weight- 6.4kg per sheet of 1.9m2 area, Can withstand wind speeds up to 192km/hr.

Does not break during transportation and installation,Available in a range of environmentally sensitive colours, Excellent colour retention, Requires minimum maintenance. Contains no hazardous chemicals

Corrugated Sheet

Width 1.07mtr
Length (1mm to 3mm)

16mtr
Color Available
Clear, Green, Brown, Blue, Silver
Type Compact

SUNLITE™ corrugated sheet is a single wall profiled sheet that provides better rigidity than flat sheet of similar thickness. It is extremely light in weight, allowing easy handling and minimal support structures.

Compact Sheet

Width 0.914mtr, 1.22mtr, 1.52mtr, 1.83mtr
*Length
(1mm to 3mm)
2.44mtr, 15mtr, 31mtr
*Length
(4mm to 6mm)
2.44mtr

SUNLITE™ Compact Sheet clear sheet is the regular sheet grade for transparent applications. It gives protection against breakage or intrusion; it is better insulator than glass and is easily fabricated for a wide range of indoor application.

Clear SUNLITE™ polycarbonate sheet glazing offers excellent clarity and has the highest transmission in the visible light and near infra-red region of the spectrum. As it is essentially opaque to all wavelengths below 385 nanometers, it is ideal for [protecting art, antiques, retails displays and fabrics from the damaging effect of UV rays. Clear SUNLITE™ polycarbonate solid sheet offer excellent clarity almost approaching that of glass, with light transmission values of 75 – 87 % depending upon the thickness of sheet.

Other products & services we offer
Polycarbonate Sheet
Wind Driven Roof Ventilators
Powered Roof Ventilators

 
 

Indiamart

Terms of Use - Privacy Policy - Link to Us

Copyright © 1996-2014 IndiaMART InterMESH Ltd. All rights reserved.