Anupam Heaters & Controls Private Limited

This Heater can be manufactured in STRIP TYPE & BAND TYPE .

In Band type it comes with Water Cooling system & without Water
cooling system. All Aluminium Cast heaters are customized .The Tubular
Heating element is embedded in the Aluminium cast & machining is to
be done to get the required size.

High Thermal Conductivity provides uniform temperature. The main
application of these heaters are in the Extruders .

Anupam’s nozzle band heaters coil type are capable of performance under the most adverse conditions. Highly recommended for processing high temperature resins to eliminate premature failures due to burn out/ process material leakage.
heat transfer is based on conduction as well as on radiation principle, which not only improves the thermal efficiency but easy to assemble on nozzles as no pressure on heating surface is essential. Even unskilled operator can fit the heater with no risk of failure of the heater.

coil type nozzle heaters are specially designed to prevent the failures of heaters against the leakage and contamination of plastic material at nozzle position. This heater can meet the higher temperature requirement prior to moulding at nozzle position.

application :for heating the nozzles of injection molding machines.

Anupam's Unique Insulation Plus Ceramic Band Heaters are Specifically designed and engineered to meet the ever increasing demand for energy conservation and to improve operation efficiency capable of generating higher temperature essential to process today's high temperature resins.

Energy Conservation is achieved by using 1 thick Ceramic fiber insulating blanket on the outer surface increasing the overall outer diameter by 2 Minimum Length Required is 4 Reducing power consumption upto 30 because of low thermal conductivity of the ceramic fiber insulation, the external surface temperature of the insulation plus ceramic band heater is approximately 80°C while running the inside surface temperature at 300°C.

Anupam’s fleible tubular heaters are available in round section6.5 mm D 8.5 mm D and square section 6 mm 6 mm 8 mm 8 mm. These are available in various sizes see table and can be bent by hand to fit into nearly any 2D or 3D contour and groove.

The construction of Micro Tubular Heaters are in round, square or rectangular section manufactured out of Incoloy 800 tube to guarantee the greatest thermal exchange, planned to work in the most difficult conditions, keeping an excellent efficiency and a good reliability.

High Density Cartridge Heaters provides longer life with respect to conventional types heating elements through eclusive manufacturing technique. Heating coil is wound around a ceramic core and isolated from the outer sheath through layer of highly compressed magnesium oides creating a high degree of thermal conduction. They are in diameter 6.5 mm, 8 mm, 10 mm, 12.50 mm, 16 mm, 20 mm, 1 4, 3 8, 1 2, 5 8, 3 4 and 1

Anupam's Air Cooled Ceramic Band Heaters are designed for super efficient and economical cooling on extrusion and blow moulding machines.

Heater band is 60 Percent open by perforated metal sheet which ensures maximum surface exposure for better cooling. The heater band is covered with Blower cover for mounting the Blower. Advantages of air cooled over liquid cooled operation includes lower cost, easy replacement, low maintenance, no leakage problem and uniform temperature control.

Band heaters are hermetically sealed for liquid plastic during the manufacturing process. The connection between the heating element and the leads is protected by a special fitting made of brass/stainless steel 1 mm thick, without welding which allows a high mechanical strength in the most delicate area of the heater. They are available in model Z.11 and Z.17

Application :For heating the nozzles of Injection Molding Machines.

We make high quality screws barrels for any application as per customers requirement.

We ensure a high standard of product. Quality materials is being used to manufacture screws barrels which are not susceptible to premature wears.

All Screws barrels are made from high quality nitriding steel with hardness of 65 to 68 RC after duly gas nitrided.