 |
Workshop & Industrial Equipments |
|
|
We are engaged in supply of Workshop & Industrial Equipments, Four Post Lift, Two Post Lift Tusker, Two Post Hydraulic Lift, Workshop Efficiency Management System.
|
 
| | Head Beam AlignerHead Beam Aligner Model - Optoline
Apex Optoline which is a versatile Head Light Aligner. It is easy to adjust Head Lights on pre-calibrated charts in its specified limits with clear and simple Aiming screen.
Technical Specification:
• Does not require power supply.
• Mobile can be moved on rails.
• Extra long rails for wheeling the unit away in case of drive through condition.
• Only 50cm clearance required between vehicle head light and Lens.
• Optional :- Lux Meter |
| | Two Post LiftTwo Post Hydraulic Lift - H We offer an extensive range of automobile equipments. The two post lift tusker- H imported from a renowned manufacturer. It comes with a dual cylinder posts and the automatic stop bar. Some of the silent features and technical specification of the product are: Salient Features: -
Dual-cylinder two post -
Automatic arm restraints -
Automatic stop bar Technical Specification: | Lifting capacity | : | 9000 LB / 4.0T | | Lifting height | : | 1800mm / 70" | | Overall height | : | 2857mm / 112" | | Overall width | : | 3353mm / 132" | | Drive through | : | 2530mm / 100' | |
| | Garage Tools & Accessories -
Tools Trolley Tool Box Axle Stands Waste Oil Drainer Pneumatic Tools Engine Crane Sanders & Polishers
|
| | Tyre InflatorWe provide an extensive range of automotive products. Our Automatic digital Tyre Inflator I Deflator double display is a microprocessor based system made by using latest embedded technology. It is fully electronic and safe device to inflate tyres accurately to a preset pressure. The unit is designed to use minimal compressed air thereby avoiding wastage of compressed air. The system is absolutely weather proof, robust and elegant in design. Salient Features: -
Digital Displays for Desired (SET Pressure) and Actual tyre pressure. -
Increase / Decrease key on front panel for setting pressure. -
Change over switch to display in Kg. / sq. cm. on front panel. -
Automatic setting of filling speed. -
Elegant design. -
Touch sensitive long life keys. -
Key for back light control. -
Remote control unit (wireless) to set desired pressure: (Optional). -
Auto Drain filters for filtering moisture, dust or oil particles. (Optional). -
Cabinet as per IP 65. Safety Features: Technical Specification: | Accuracy | : | 1 PSI | | Range | : | 0-150 PSI | | Display | : | 2 x 1 inch backlit LCD | | Resolution | : | 1 PSI or 0.07 Kg/cm2 | | Dimensions in mm | : | 250 (h) x 270 (w) x 120 (d) | | Supply Voltage | : | 210v - 240v AC | | Weight | : | 5.0 Kg. (Aprox.) | |
| | Scissor Lift | Scissor Lifts | | 3.2 Ton/2.7 Ton | | • | Lifting Capacity : 3.2Ton/2.7Ton | | | • | Maximum Lifting Hight : 2000mm/1000mm | | • | Lowest Hight : 195mm/110mm | | • | Lifting Time : 50 sec./30 Sec. | | • | Working Voltage : 220v./50Hz | | | |
| | Pollution Checking machine | SALIENT FEATURES | | * | Measure Item | : | (HC,Co,CO2,O2,NOx Lambda, AFR (Option RPM) Warm up time is less than 4 min. | | * | Leakage Test | | | | * | Response | : | 10 Sec (More than 90%) | | * | Auto Zero | : | 20 Sec. | | * | HC residual Test | | | | * | Fuel Selectable | : | Petrol/LPG/CNG | | * | Measure Range | : | Resolution | | * | CO | : | 0~9.999% (0.001%) | | * | CO2 | : | 0~20.00%(0.001%) | | * | HC | : | 1~10.000 PPM (1ppm) | | * | O2 | : | 0~25% (0.01%) | | * | NOx | : | 0-5000 ppm (1ppm)-5 gas | | * | Lambda | : | 0.50~3.oo (0.001) | | * | AFR | : | 7.35~29.40 (0.01) | | * | Power | : | 220V, 50Hz, 1Phase | |
| | Nitrogen Inflator With Built In Nitrogen Genrator | TECHNICAL SPECIFICATION | | Power Supply | : | 230 V. AC±10% 50Hz | | Display | : | 2x1 Inch 3-1/2 Backlight LCD (for SET & TYRE Pressure) | | N2 output pressure | : | 58 to 100 psi | | Nitrogen Storage Tank | : | 60 Liter | | Vehicle | : | Two wheeler Car LCV. | | Nitrogen Producing Speed | : | 2500 to 3500 L/H | | Input pressure | : | 8 to 10 Kg/cm2 | | |
| | Vacuum Cleaner | Technical Specifications | | * | Ait Flow | : | 215/430/645 m3/h | | * | Tank Capacity | : | 36/70/77 Liner | | * | No. of Motors | : | 1/2/3 | | * | Noise Level | : | 60/67/68 (db) | | * | Water Lift | : | 2400+2 mm(H2O) | | * | Operating Voltage | : | 220v AC | | * | Power | : | 1400/2600/3500 Watts | |
| Garage EquipmentOffering Garage Equipment
|
| Workshop EquipmentOffering Workshop Equipment
|
|
 |
|
 |
|
© Apex Technologies, Lucknow. All Rights Reserved (Terms of Use)