The diamond paste offered by us is used for treating surfaces of work pieces comprising diamond powder in a mechanical mixture with surface-active and lubricating (cooling) components. The components of the paste are used in the following quantities (in % by weight):
We offer different types of strip dies and shaving dies / section dies are available in designs which are in relative to the types of metal that is being used. They can be used for ferrous and non-ferrous materials and are widely used by drawing companies for preparation of rod.
The split dies for enameling are specially designed by us made as per the international quality standards. These dies are used for casting small segments constituting tread pattern forming portions of the tyre mold. They are used for applying enamel coating to wire for electric modes.
Specially designed for cable industry the compacting dies offered by us are exclusively designed by using the analytical and numerical method to provide precision and accuracy to the material they are used in.
MONO DIAMOND consists of synthetic diamond crystals, synthesized under tightly controlled growth conditions. For this reason only Mono Diamond Dies has following fantastic features:
AWD, Mono Dies are free from impurities, crack and defect with in the critical working zone.
AWD, Mono Dies has low internal strain, ensuring superior fracture resistance
AWD, Mono Dies are highly thermal stable.
AWD, Mono Dies has high thermal conductivity, leading to the heat generated being dispersed very quickly while drawing process.
Mono Diamond Dies will draw the same wire types as that from PCD, but these dies are highly recommended for drawing final sizes to achieve high quality and superior wire finish. Apex manufacturers Natural Diamond / Mono Diamond Dies from 0.05 mm to 2.00 mm.
ORDERING FORMAT
Customer’s are requested to specify the following points while ordering:
The solid enameling dies helps in achieving a more accurate and consistent enameling applications on enameled wires. These dies are available in both T.C. & natural diamond. Our range of solid enameling is available in various sizes ranging from 0.050 mm to 3.00 mm. Our tapered internal geometry allows easy thread ability for even the smallest wire sizes. These dies are available in standard shapes or as per customer's specifications.
The polycrystalline diamond (PCD) wire drawing dies offered by us are known for their longer die life and excellent wire roundness. They have high resistance to wear, cracking or bearing, good wire surface finish. They are available in two varieties, namely, Compax and Sumidia. Depending on their application are used for different wire drawings.
Some of the benefits of these dies are:
Excellent ware
Fracture resistance
Maximum die life
Highest machine efficiency with minimum down time
Available in a wide range of sizes
Predictable die wear
Applications Areas
They are widely used in nonferrous wire like copper wire, stainless steel wire, aluminum wire, and tire cordet. They are especially good for larger sizes where demanding wear is a problem.
The wire guides are precision-guiding tools, which use rollers rather than slide wire to roll wire into a drawing machine from coils in cable industries. They are competitively priced and can be supplied to customers within the committed time lead.
The boron carbide powder is used for different applications. These include abrasives, armor, nuclear radiation protections, metallurgy and refractories. Depending on the use and needs of the customers and application they are used for, these powders are available with different grain sizes and purities.
Apex tungsten carbide (TC) wire drawing dies are available in the different sizes, ranging from 0.150mm to 60.00mm. These dies are specially used for drawing thicker sizes or where PCD Dies are not economical. We offer a wide variety of tungsten carbide dies for different wire drawing needs, including shaped wire dies.
The diamond dies offered by us are available in different shapes and are used for wide range of applications. They are available for drawing ferrous and non-ferrous material.
Apex Group manufacturers Extrusion Tips with T.C. inserts, Diamond inserts, PCD inserts and tools steel, depending upon its application and Extruder Dies in Tool Steel, T.C. inserts, and Full T.C. The Tips and Dies are manufactured with a T.I.R. of 0.01 mm (0.0005’’). The toolings are highly polished to ensure even flow of material. Apex Group also manufacturers tooling for profile cables with in house facility of precision CNC Wire Cut and CNC EDM Machines.
Apex Group manufactures different type of Breaker Plates as per requirement. Some commonly manufactured Breaker Plates are-with straight holes, with inverted holes, with through slots, slots in perpendicular directions etc. The Breaker Plates are heat treated so as to reduce wear & tear and provide it longer life.
ORDERING FORMAT
While ordering EXTRUSION TOOLS (Tips, Dies, Breaker Plates, etc.) Customer’s are requested to provide the detailed drawing as per their specifications or can request Apex for it’s ordering form with blank details.
Processing...
