Application Systems

CERBACK Brand Welding back up tapes & strips for one side welding. These are used for ALL kind of WELDING PROCESSES & for ALMOST ALL METALS, for One Side welding. Welding processes such as SMAW, FMAW, GMAW, SAW, CO2, TIG, MIG etc.

By using Weld back up strips, Welding COST is saved approx 50 to 60% whereas welding TIME is saved by 50%. RESULTS are 100% RADIOGRAPHIC WELDING. No Back CHIPPING, No Back GRINDING or Gouging, No PURGING required.

Weld back up tape consists various profiles of Non Porous CERAMIC tiles for butt welding, Fillet welding etc.

We manufacture SIBACK - FIBERGLASS Backing Tapes.

SIBACK is a high heat resistant aluminum backing tape with a woven fiberglass having RED Center line for easy location in root gap adjustment.

Very simple & easy to use.  Just peel off release paper from Aluminum. Stick Aluminum tape to  backside of the root gap on sheet, plate, pipe or vessel, adjusting center line with Center of Root gap. The fiberglass, which is One inch wide,  covers the root gap and leaves no open air gap, causing NO OXIDATION .

By using fiberglass weld back up tapes, Welding COST is saved approx 50 to 60% whereas welding TIME is saved by 50%. RESULTS are 100% RADIOGRAPHIC WELDING. No Back CHIPPING, No Back GRINDING or Gouging, No PURGING required.

fiberglass welding back up tapes are one inch in width, pasted at center of 75 mm wide Aluminum tape coated with temperature resistant acrylic adhesive.

Fiberglass backing tapes are available in 40mil (1 mm) thick, 70 Mil (1.5mm) thick & 120 mil(3mm) thick.

By using Weld back up tapes, Increases productivity, Root weld and fill in one pass

·    Ideal for stainless steel and alloyed metals, sheet, plate, pipes and  vessels.

·    Imparts X-ray quality back beads on root pass.

·    Saves argon gas as no purging will be necessary, resulting Massive  purge gas savings. Makes process faster as it saves time in preparation and assemble.

·   Welds one side only.

·   Provides incombustible, high temperature stability. More flexible, low  thermal conductivity, good thermal shock resistance, good mechanical and chemical agents resistance, good electrical properties.

·    Saves cleaning costs.

·    Eliminates weld defects, No re-welding & re-work.

·    For horizontal and vertical welding.

 No Gouging or Grinding, Back chipping.