Aquascape Engineers

PF – 1000 Series
Single Jet Nozzles  

Design/Application Data:
Small tapered Adjustable clear stream nozzle develops display with a minimum of distortion. Designed for precision use with spray ring, spray bars or other installations where precision vertical columns or trajectory patterns are desired.

Note

(1)	Smaller orifice water patterns are sensitive to wind and should be used indoors or in protected areas.
(2)	Larger orifice water patterns are more stable to wind conditions be develop a greater return splash and a louder sound lever, which may in some interior locations.

Hydraulic Data

Model Number	BSP Conn.	Dim. A	Orifice		Stream Height in Meter
					1	1.5	2	2.5	3	3.5	4
PF-1008	1/8”	43mm	3mm	LPM	1.45	2.30	3.00	3.50	4.20	4.70	5.00
				Head in Mtr	1.35	2.00	2.70	3.35	4.00	4.70	5.35
PF-1009	1/4"	53mm	3mm	LPM	1.45	2.30	3.00	3.50	4.20	4.70	5.00

PF – 1100 Series
Multi Jet Nozzles         

Design/Application Data:
PF-1110 Nozzles is spray diameter & Height adjustable. All jets are directional adjustable. The intermediate ring of jets and the outer ring of jets are individually adjustable with flow controls located on the top of the nozzles. The nozzles are made of brass and bronze, stainless steel fitted with Neoprene seals.

Specification Data:
Machined brass and bronze construction. Stainless steel fitted. Female threaded connection.

Operating Data:

• Noise	:	Moderate
• Visibility	:	Excellent
• Splash/Mist	:	Low to moderate
• Wind Stability	:	Good
• Aeration Quality	:	Poor

 

 

PF-4000 Series
Foam Effect Nozzles

Design/Application Data:
The “Aquascape” Aerated Jet Nozzles are injection Nozzles that are independent on the water level. Become of the injection effect the surrounding Air is sucked in, intensively mixed and thrown high into the Air by the injector jet Aerating, Jet Nozzles are designed to produce columns of highly aerated water with a frothy effected.

Specification Date:
Made from Copper and Brass Pipe with Cast Bronze inlet.

Operating Data :

• Noise	:	Moderate
• Visibility	:	Excellent
• Splash/Mist	:	Low to moderate
• Wind Stability	:	Good
• Aeration Quality	:	Good

Hydraulic Data

Model No.	BSP Conn.	Dim. A	Jet Orifice		Spray height in meter
					1	2	3	4	5	6
PF-4001	1”	150mm	25mm	LPM	40	55	70	-	-	-
				Head in Mtr	6	8	10	-	-	-
PF-4002	1½”	210mm	40mm	LPM	100	140	170	200	-	-
				Head in Mtr	6	8	10	12	-	-

PF-3400CB Series
Foam Effect Nozzles

Design/Application Data:
“Aquascape” 3400 series Aerating Jets are made of cast Bronze, Brass and stainless steel. The unique water level independent and Flow Adjustable Aerating Jets are for installation above water level the complete Jet has to be above water level.

Operating Data :

• Noise	:	Good
• Visibility	:	Excellent
• Splash/Mist	:	Low to moderate
• Wind Stability	:	Excellent
• Aeration Quality	:	Excellent

Hydraulic Data

Model No.	BSP Conn.	Nozzle Length Dimn  ‘A’	Jet Orifice		Spray height in meter
					0.50	1.00	1.50	2.00	2.5.00	3.00	4.00	5.00	6.00
PF-3480CB	1.½”	170mm	51mm	LPM	90	110	130	150	168	190	238	-	-
				Head in Mtr	2.5	4.3	5.9	7.00	8.00	10.5	11.00	-	-

PF-3400BP Series
Foam Effect Nozzle (Water Level Dependent)

Design/Application Data:
Aerating jet nozzles are designed to produce columns of highly aerated water with frothy effect. High light reflection characteristic of scream is ideal for lighted fountain. The aerating jets are made of cast bronze and brass stock, machined to close tolerance. The inner nozzle has an internal tapered bore. Water and air suction ratio can be adjusted in this nozzle due to special design.

Specification Data: 
Thease Jets are made from cast bronze with brass pipe.

Note: 
To prevent undulating water display avoid installations where water level varies or where waves may develop.

Hydraulic Data

Model No.	BSP Conn.	Nozzle Length  Dim.A	Jet Orifice		Spray height in meter
					1	2	3	4	5	8	10	15	20	30
PF-3420	1”	242 mm	32mm	LPM	25	29	34	41	52	-	-	-	-	-
				Head in Mtr	4	6	8	11	18	-	-	-	-	-

PF-1300 Series
Water Film Nozzles

Design/Application Data:
A Clear of water in the shade of a bell. Minimum sound or splash. For silence wind-free locations in small and medium sized displays. Ideal in grouping of various heights. No Constant water level required.

Specification Data :
Brass with adjustable top.

Note : (for Optimum Effects)
• Requires non-turbulent water supply.
• Requires fine screening at pump.

Hydraulic Data

Model No.	BSP Conn.	Dimension			Spray diameter (cm)
		A	B		15 cm	30 cm	45 cm	60 cm
PF-1301	½”	176 mm	56 mm	LPM	8	12	20	30
				Head in Mtr	1	1	1	1
PF-1302	1”	350 mm	56 mm	LPM		15	22	35
				Head in Mtr		1	1	1

PF-6400 Series
Sphere Effect Nozzles

Design/Application Data:
The Dandelion (Hemisphere) effect is created by multiple discs of water at the radiating from a center manifold. These effects produce a fine spray that results evaporation cooling in the area of the effect. Construction is of cast bronze, copper and precision machinery brass.

Hydraulic Data

Model No.	BSP Conn.	Dimension B Sphere O.D.	Dimension A Hub Dia	No. of Arms	LPM	Head in Meter
PF-6442	2.½”	1.00 Mtr.	204 mm	35	370	10.00
PF-6444	2.½”	1.20 Mtr.	204 mm	40	450	10.00
PF-6446	4”	2.00 Mtr.	254 mm	70	800	15.00

PF-6400 Series
Sphere Effect Nozzles

Design/Application Data:
The Dandelion Sphere effect is created by multiple discs of water at the radiating from a center manifold. These effects produce a fine spray that results evaporation cooling in the area of the effect. Construction is of cast bronze and precision machined brass.

Hydraulic Data

Model No.	BSP Conn.	Dimension B Sphere O.D.	Dimension A Hub Dia	No. of Arms	LPM	Head in Meter
PF-6441	2.½”	1.00 Mtr.	204 mm	40	450	10.00
PF-6443	2.½”	1.20 Mtr.	204 mm	40	500	10.00
PF-6445	4”	2.00 Mtr.	254 mm	110	1500	15.00

PF-1300 Series
Water Film Nozzles

Design/Application Data:
The “Aquascape” Fan Jet creates a particularly compact, Fan shaped water stream with a thickness of 6 mm. This type nozzle is especially attractive when arranged in a group around a center nozzle but even on its own this jet will always find its place in any arrangement.

Specification Data :
Cast bronze construction with thread connection.

Operating Data :

• Noise	:	Good
• Visibility	:	Excellent
• Splash/Mist	:	Low to moderate
• Wind Stability	:	Excellent
• Aeration Quality	:	Poor

Hydraulic Data

Model No.	BSP Conn.	Spray Angle		Spray height in meter
				0.50	0.75	1.00	1.50	2.00	3.00
PF-1317	1"	45o	LPM	60	80	90	150	-	-
			Head in Mtr	0.50	0.80	0.80	1.00	-	-
PF-1318	1½”	45o	LPM	90	110	120	200	250	270
			Head in Mtr	0.50	0.80	0.80	1.00	1.20	1.80
		Vertical	LPM	170	200	250	350	400	500
			Head in Mtr	0.80	1.00	1.30	1.50	2.30	3.30

PF-1100 Series
Multi Jet Nozzles

Design/Application Data:
Finger jet nozzle produces a delicate, arching spray pattern using precision clear stream jets. Combined with a main swivel connection permits a wide range of spray patterns and angles. Due to the low noise and splash reduced, finger jets are ideal use in courtyard or entryway pools designed for close range viewing distance.

Application includes indoor or shielded outdoor use in commercial institutional and municipal building and landscape projects as primary display features, or as peripheral accents to primary display features they are also used effectively in series or grouped in clusters.

Specification Data :
Machined brass and bronze construction. Female threaded connection.

Operating Data:

• Noise	:	Low
• Visibility	:	Poor
• Splash/Mist	:	Low to moderate
• Wind Stability	:	Poor
• Aeration Quality	:	Poor

Hydraulic Data

Model Number	BSP Conn	No. of Jets	Diamm. A	Orifice	Parabolic Length	Parabolic Height	Parabolic Width	LPM	Head Meter
PF-1130	1"	09	110mm	4mm	1.00 m	0.12 m	1.00 m	48	1.22
					1.50 m	0.21 m	1.25 m	58	2.00
					2.00 m	0.30 m	1.50 m	65	2.50

PF – 3400 Series
Foam Effect Nozzles        

Design/Application Data:
A column of Frothy, aerated water, Recommended for small and medium displays in shallow pools.  Beautiful when lighted.  Jet has low profile and neat appearance.  No constant water level is required.

Specification Data:
Cast bronze and brass with internal air/water ration adjustment. Exterior is of Bronze.

Hydraulic Data:

Model No.	BSP Conn.	Dia. A	Jet Orifice		Spray height in meter
					0.50	1	1.50	2.0	2.5	3.0	3.5	4.0	4.5	5.0
PF-3401	½”	100mm	23 mm	LPM	40	60	-	-	-	-	-	-	-	-
				Head in Mtr	1.25	2.1	-	-	-	-	-	-	-

PF-3400 Series
Foam Effect Nozzle (Water Level Dependent)

Design/Application Data:
The “Aquascape” Foam Geyser Nozzles are designed to provide in their lowest spray heights white mounds of water. While at greater spray height to provide highly visible fluffy white spray effect. Foam Geyser nozzles are made of cast bronze with hard copper air snorkels.

Operating Data :

• Noise	:	Good
• Visibility	:	Excellent
• Splash/Mist	:	Low to moderate
• Wind Stability	:	Excellent
• Aeration Quality	:	Excellent

Hydraulic Data

Model No.	BSP Conn.	Dimension			Jet Orifice		Spray height in meter
		A	A1	B			1.00	1.50	2.00	2.50	3.00	4.00	5.00	6.00	8.00
PF-3461	1.1/4” Dim.	347 mm	125 mm	119 mm	32mm Dim.	LPM	125	150	175	190	200	230	-	-	-
						Head in Mtr	5.00	7.00	8.0	8.36	10.8	15	-	-	-

PF - 9000 Series

Design and application Data
Spray rings are constructed of stainless steel, brass and copper in a variety of diameter and orifice sizes. Adjustable brass smooth stream nozzles develop uniform circular spray pattern.

Notes • Specify : Spray ring materials like Brass, Copper or Stainless Steel
• Specify : Dome center Drop, Inside Drop, Outside drop, Vertical Pattern, Inside Basket weave, outside    basket weave.
• Nozzle angle can be adjusted after installation.
• Provide basket strainer or ‘Y’ type strainer for nozzle orifice protection

Hydraulic Data

Model No.	Diameter	Type of Nozzles	Jet Orifice	Qty. of Nozzle		Spray Height in Meter
						0.50	1.00	1.50	2.00	2.50	3.00	4.00
PF-9012	300 mm	PF-1010	4.75 mm	12	LPM	68	95	104	117	140	180	225
					Head in Mtr	1.82	3.04	3.65	4.87	5.60	5.90	6.00

Single Jet Nozzles
PF - 1000 Series

Design/Application Data:
The “Aquascape” High Jet Nozzle is Special Nozzle that is used to achieve greater Fountain Height, preferred in Floating and lake fountains.

• Clear wind stable and full stream jet
• Independent from the water level
• For greater fountain Height

Specification Data :
Made from cast bronze with mirror in side surface.

Operating Data:

• Noise	:	Moderate
• Visibility	:	Excellent
• Splash/Mist	:	Low to moderate
• Wind Stability	:	Good
• Aeration Quality	:	Good

Hydraulic Data

Model No.	BSP Conn.	Dimension A	Jet Orifice		Stream Height in Meter
					2	3	4	5	6	8	10	15	20
PF-1048	1½"	235mm	19mm	LPM	105	125	150	180	215	255	280	-	-
				Head in mtr.	3	4	5	6.5	8	10	12.5	-	-
PF-1050	3"	315mm	45mm	LPM	555	675	875	990	1230	1500	1700	2000	2275
				Head in mtr.	3	4	5	6.5	8	10	12.5	20	27

PF-3400 Series
Foam Effect Nozzles

Design/Application Data:
Jet Cluster nozzles produces a Vertical columns of water using connection rows of clear stream jet giving the appearance of a large diameter water columns. Due to the refractive quality of the individual streams, jet cluster nozzles offer good visibility at the long range viewing distance.

Nozzle is further enhanced when combined with submersible lighting. Applications include indoor or shielded out door use in commercial, institutional and municipal building and landscape projects, as primary display features, or as peripheral accents to primary display features they are also used effectively in series or grouped in clusters.

Specification Date:
Machined brass and bronze construction machined brass jets female threaded connection.

Operating Data :

• Noise	:	Low to moderate
• Visibility	:	Good
• Splash/Mist	:	Low to moderate
• Wind Stability	:	Good
• Aeration Quality	:	Good

Hydraulic Data

Model Number	BSP Conn	No. of Jets	Jet Orifice	Dimn. A	Dimn. B		Stream Height in Meter
							0.50	1.00	1.50	2.00	2.50	3.00
PF-3490	1"	30	4.00mm	100mm	110mm	LPM	66	102	132	159	183	210
						Head in Mtr	1.00	1.50	2.00	2.50	3.10	4.00

PF-1300 Series
Water Film Nozzles

Design/Application Data:
A Clear pulsating sheet of water in a mushroom form when operated in a full sheet pattern there is very little shape or splash, ideal for both silent and windy locations. Preferred for floating or lake fountain.

Specification Data :
Cast bronze and brass construction with adjustable top cone.
• Bottom of nozzle must be installed at water level.
• Water supply must be non-trouble.

Operating Data :

• Noise	:	Good
• Visibility	:	Excellent
• Splash/Mist	:	Excellent
• Wind Stability	:	Excellent
• Aeration Quality	:	Moderate

Hydraulic Data

Model No.	BSP Conn.	Dimension			Spray height in cm
		A	B		15 cm	30 cm	45 cm
PF-1303	½”	160 mm	45 mm	LPM	10	22	30
				Spread Head in Mtr	1	1	1

PF – 1100 Series
Multi Jet Nozzles  

Design/Application Data:
A sparkling and unique triple – tiered effect of clear streams. Ideal for small and medium sized displays. No constant water level is required.

Specification Data:
Brass and cast bronze construction with adjustable nozzles and removable cap for easy cleaning.

Operating Data:

• Noise	:	Low
• Visibility	:	Moderate
• Splash/Mist	:	Poor
• Aeration Quality	:	Poor

 

 

 

Multi Jet Nozzles

PF - 1100 Series

 

Design/Application Data:
A sparkling and unique triple – tiered effect of clear streams. Ideal for small and medium sized displays. No constant water level is required.

Specification Data:
Cast bronze construction with Fix Jets removable cap for easy cleaning.

Operating Data:

• Noise	:	Low
• Visibility	:	Moderate
• Splash/Mist	:	Poor
• Aeration Quality	:	Poor

PF-3400 Series
Foam Effect Nozzle (Water Level Dependent)

Design/Application Data:
The Cascade nozzles produce a graceful conical Shaped while display.  The water level dependent aerated display is suitable for clam to light wind conditions.  Exhibits excellent light reflecting properties.

Specification Data: 
Constructed of machined cast bronze natural finish.

Note: 
To prevent undulating water display avoid installations where water level varies or where waves may develop.

Hydraulic Data

Model No.	BSP Conn.	Nozzle Length	Jet Orifice		Spray height in meter
					1	2	3	4	5	6	8	10	12
PF-3450	1”	152 mm (6”)	50mm	LPM	100	131	153	174	-	-	-	-	-
				Head in Mtr	8	14	20	24	-	-	-	-	-

PF-1300 Series
Water Film Nozzles

Design/Application Data:
A study in contrasting waterborne art Waterlily nozzle produces an eye-catching display that’s both light and delicate. A miniature version of our Crystal Arch nozzle, the waterlily combines that lofty, single tier arching pattern with a lower bell shape feature similar to the Trumpet, with a compact, sheeting fall.

The waterlily exhibits excellent prismatic light reflecting prosperities, thanks to the multi-channeled nozzles individual water trajectories that expand to form liquid crystalline drops many times larger than the original clear streams. This nozzle is at its best when illuminated at night with adequate perimeter light placement.

Technical Description :
• Excellent pattern stability even in moderate wind conditions.
• The waterlily is water level independent and can be located in dry areas.
• The waterlily has a female BSP threaded connection.

Hydraulic Data

Model No.	BSP Conn.	Dim. A		Spray height in meter
				0.25	0.50	0.75	1.00
PF-1308	1”	190mm	LPM	64	75	83	90
			Head in Mtr	2	3	3.50	4
			Dia of Cone	0.25	0.50	0.75	1