It is also known as hyper filtration or reverse osmosis system.In the Process of desalination of water R.O. membrane technology plays vital role.We, at “Aquatherm” offers Industrial Reverse Osmosis System with world’s best spirally wounded thin film composite membrane and FRP or stainless steel housing.Performance of any RO plant depends on proper pretreatment, and hence we incorporate appropriate prefiltration with required chemical dosing in the system.The system could be manual or fully automatic with safety interlocks.

Salient Features:

• A pre-validated & pre-tested skid mounted solution!
• Complies and supersedes latest US,European & Indian Pharma standards for purified water generation and distribution!
• Designed & manufactured as per Pharma Engg. and Industrial standards!
• CGMP & GAMP compliance!
• Standardized product-fast track delivery-reduced time & compliance cost!

Technical Features:

• Hot water sanitary(>80ºC)fully automatic RO EDI skid!
• All bought outs item from reputed suppliers across the globe!
• New instant hot water sanitizable EDI to reduce sanitization time by hours!
• Sanitary SS 316L RO pressure tubes with TC ends!
• SS –316L sanitary polished TC end piping and valves!
• Argon/Orbitally welded sanitary piping and valves.
• Variable frequency drive based SS 316 high pressure pump ensures optimized power and lowest operating cost!
• SS 316L feed buffer cum sanitization tank with inbuilt electric heater control for built in CIP cum hot water sanitization skid!

 

• Flow Range:100 LPH to 50,000 LPH
• Material of Construction: SS-316/304/FRP ...
• Application: Potable water, Process Water to industries like Textile, pharmaceuticals,Chemical,Power generation, Food and beverages,Metal treatment, Semiconductor ,Boiler Feed water,Cooling tower etc...

Our constant endeavour is to upgrade our system with latest innovative technologies.”Aquatherm” offer world’s latest technology of electro-de-ionisation to generate high purity water to meet stringent water quality standards as per USP-31,UK-MCA,WHO and IS .The electrically operated compact system having unique combination of membranes and ultrapure resins can generate consistent water quality having conductivity less than 1 us/cm with TBC and TOC level within the limits. This unit does not require acid and alkali for regeneration and hence environment friendly with negligible operating cost.

EDI Process:
Our Continuous electrodeionisation modules utilize ion exchange resins primarily as a bridge to allow electric current to pass through the electrodeionisation cell. This allows us to operate the modules without any brine injection or concentrate recycle. Additionally, the ion exchange resins are used to 'polish' the purified water stream by removing minute quantities of silica, carbon dioxide and other contaminants. The ion exchange resins are continually being regenerated by the dissociated hydrogen and hydroxyl ions that have been created by the electric current. Electrodeionization utilizes no chemical regenerants and creates no hazardous wastes.
 

• Flow Range:100 LPH to 10,000 LPH
• Application:Process Water to industries like pharmaceuticals,Power generation, Metal treatment , Semiconductor ,Boiler Feed water and wherever need of ultrapure water etc.

‘’AquaTherm” Pressure quartz / multigrade filter is latest concept in the field of filtration technology media filtration to generate water free from suspended solids ( TSS < 5 ppm) . The suspended solids are trapped by using fine pure graded silex/ quartz as the filter media .The quantity of filter media and vessel size is designed to handle incoming suspended solid upto 50 ppm. The Activated Carbon Filter is widely used to remove colour,odour and chlorine from the water.It consists of Activated Carbon granules with higher iodine value and as per IS 877 standards is used for Filtration, supported by layer of graded sand. In order to remove dissolved Iron and for fine filtration specially designed filter can be supplied . In case of excess suspended solids and turbid particles Plate type clarifier can be incorporated. 

• Flow Range:1.0 m3/hr to 100 m3/hr
• Material of Construction:MS / FRP / SS / MS-Rubberlined
• Application: Process Water,Potable water, Swimming Pool, Pre-filtration to DM & RO plant, Side stream filter to Cooling Tower etc.

Raw or filtered water with total dissolved solids (TDS) needs to be removed for various process application. De-mineralisation or de-ionisation of water using Ion Exchange process is quite common in the industry and this can produce water having total dissolved solids less than 1 ppm. “AquaTherm” Demineralisation plant exchange all cations and anions during Ion Exchange process,which consists of either twin bed or with mixed bed polisher. The charged resins exchanges H† ions with all Cations and OH‾ ions with all anions to de-ionise the water.The DM system needs regeneration with HCL acid and NaOH alkali after certain period based on the input load of Total dissolved solids. The system can be designed in various ways such as twin bed, Mixed bed, with De-gasser, Weak base anion etc based on the feed water analysis to reduce the operating cost .The system can be supplied in manual or auto mode .

• Flow Range: 1.0 m3/hr to 100 m3/hr
• Material of Construction:MS-Rubberlined/FRP
• Application:Process Water to industries like Textile, pharmaceuticals, Chemical,Power generation , Food and beverages,Metal treatment ,Boiler Feed water, etc

Calcium and magnesium in the water causing hardness to the water . Removal of total hardness is been taken place using “ Aquatherm” water softner which is charged with cation exchange resins in sodium form. The charged resins exchanges Na ions with Ca and Mg ions to soften the hard water.The softner need regeneration with NaCL salts after certain period based on the input hardness load. The softner’s are available in standard models as well as tailor made units.

• Flow Range: 1.0 m3/hr to 100 m3/hr
• Material of Construction: MS / FRP
• Application: Process Water,Boiler Feed water, Pre-treatment to RO plant, Make up water to Cooling Tower etc.

“Aquatherm” offers an ultra violet disinfection system which is capable of disinfecting 99.9 % of the bacteria’s in order to get the desired output .We provide world’s best U.V. Lamps mounted inside quartz jacket which can transmit optimum U.V. radiation.The SS-316L electropolished Chamber allows the UV rays to reflect inside and increase its potency of disinfection.This environment friendly system is well equipped with suitable controls and instruments mounted on the panel.

Process:
The germicidal Lamp emits UV rays of 254 nanometer wavelength inside the chamber and works by destroying the DNA of the organism of Bacteria’s /Viruses, thereby preventing replication.UV disinfection is cost effective, chemical free, safe, low maintenance, energy efficient, ozone free and produces no by-products. UV has been proven to be effective against a wide variety of Water and airborne contaminates including cryptosporidium, molds, bacteria and many viruses that can penetrate filters.Ultraviolet light has been used for decades as a reliable method of disinfection.

• Flow Range:100 LPH to1,00,000 LPH
• Material of Construction: SS-316/316L with quartz jacket
• Application:Potable water, Process Water to industries like pharmaceuticals, Food and beverages, Cooling tower etc.

‘‘Aquatherm’’ offers & supplies package type STP and ETP to cater the need of manufacturing industry as well as domestic and corporate segment. We design, engineer, fabricate, install and commission the entire system in such way that this complies to all the environmental standards to satisfy the nature as well as rules and regulation laid by pollution control board. We use all the reputed components and bought out items while manufacturing the system to ensure good result and optimum life .The compact and best aesthetics adds value to the product.

• Flow Range:1.0 m3/hr to 25 m3/hr
• Application:All the industry where effluent generates, all the domestic and corporate segments where sewage generates etc.

Boiler Water & Fuel Treatment Chemicals:

Lack of water and fuel treatment leads to many problems in various utilities such as boiler, cooling tower etc. Ultimately this results into failure ,downtime and most importantantly inefficient operation. This maintenance / repair work directly affects the money and time.We, at “AquaTherm” designed and developed the cost effective products which shall suits the requirement of customers to give optimum performance.

AQUATREAT range of chemicals for: Antiscalent ,Corrosion Inhibitor , Oxygen Scavenger, Alkalinity (pH) controller, Condensate corrosion & deposit inhibitor, Polymeric dispersant and sludge conditioner, On line descalent, Defoamer to reduce carryover & foaming, all this chemicals in Liquid form to use as feed water treatment to the boiler. We also supply acid and alkaline base descalent for removal of scale during the Breakdown/shutdown activities.

Pre & Post Combustion treatment Chemicals:Fuelmix & Thermomix:  Fuel oil additive for F.O. and L.D.O. to reduce sludge and corrosion in tanks and lines as well as to get better combustion efficiency in boilers / Thermic fluid heaters. Fireside treatment compound contains dispersant,combustion catalysts,Oxidising agents and corrosion inhibitor to take care of entire Pre and post combustion zone.

• Application & dosages: These chemicals can be dosed either mannualy Or With dosing pumps.Dosages are completely depend upon the present Operating parameters & we shall provide an assistance during this.
• Packings: All the boiler water treatment chemicals are available in 35 ,40 and 50 kgs HDPE carboys.Fuelmix–20 kgs &Thermomix – 1kg

Cooling Water Treatment Chemicals

AQUATREAT range of chemicals for: Non Chromate ,non heavy metal liquid formulation to control scale & corrosion , Complete organic based treatment , Contains threshold inhibitors for controlling precipitation, Zinc stabilizer works even at higher pH and offers best protection to metal surface, corrosion inhibitor for Copper and its alloys, Synthetic polymer and dispersant to keep the system clean.

AQUATREAT range of chemicals for: Algae,fungus & bacterial control, Oxidising microbiocide in powder form, Quaternary ammonium based ,wide spectrum organic liquid formulation, Non Oxidising, carbamate microbiocide in liquid form, Broad Spectrum,bromine and chlorine donating compounds in powder form.

• Effluent treatment Chemicals: Aquaflock :Specially formulated liquid compound for flock formation & Polyelectrolytes:Cationic ,Anionic and non ionic based polymers.
• Application & dosages: These chemicals can be dosed either manually Or With dosing pumps.Dosages are completely depend upon the present Operating parameters & we shall provide assistance during this.
• Packings: All the liquid chemicals are available in 35 ,40 and 50 kgs. HDPE carboys. Solid form chemicals will be packed in 30, 50 kg polythene bags.

It is also known as hyper filtration or domestic reverse osmosis system. In the process of desalination of water R.O. membrane technology plays vital role .We, at “Aquatherm” offers domestic Reverse Osmosis System with world’s best spirally wounded thin film composite membrane and PP housing. It is compact system having built in small high pressure pump along with filter cartridges and pressure switch. The prime use of this system is for drinking water and to use in industrial segments where pure water require in very low quantity. All the components are from worlds reputed and best manufacturers to ensure good aesthetic and performance!

• Flow Range:10 LPH to 50 LPH
• Material of Construction: PP housings with composite polyamide Membrane.
• Application:Potable water, Process / laboratory Water to industries. etc.

‘‘Aquatherm’’ CIP system is tailor made system which is been used for cleaning /descaling the precious machines and equipments to avoid downtime.This consists of a Stainless steel recirculating pump, SS –Tank ,SS corrugated flexible hose pipe with all necessary accessories. The chemical solution as per the decided strength will be pumped and then circulated through the heat exchanger , machine , RO plant , Water plant etc…and then the solution is been collected back in the tank for recirculation purpose. Thus removing all the dirt ,dust, scale ,oil , grease from the metal or inner body of your precious machine /equipment.

• Flow Range: 1.0 m3/hr to 50 m3/hr
• Material of Construction: SS or SS-PVC
• Application: To clean various machines,Heat Exchangers and equipments etc.

‘‘Aquatherm’’ offers & supplies electromagnetic dosing /metering dosing pumps which are solenoid driven and electronically operated . This pump does not have rotating parts and hence no lubrication is needed , very low wear and tear, maintenance free. This pump consists of a diaphragm which is made up of EPDM & PTFE. The entire solution contacted parts are corrosion free. The dosing pumps is having wide range and flow can be adjusted as per requirement. The pump is suitable for 230 V.AC power supply.

• Flow Range: 0.6 LPH to 12 LPH
• Application: Water treatment,Effluent treatment, Food and Beverages, Pharmaceutical, boiler feed,Cooling tower,Chemical Industries etc.