Now a days our routine life is highly dependent on Electrical and Electronics Equipments. Operations of these equipments are hampered due to Voltage Fluctuation and Spike, which is major problem in Industrial and Resident Zone.

"Aquila" make Servo Drive Stabilizer is ultimate solution for these problems. It will give steady and smooth output Voltage for trouble free operation of Electrical and Electronics Equipments.

Features:

• Voltage Regulation within 1%
• Efficiency better than 85%
• Consistent on both Resistive & Inductive Load
• Provision for manual adj. In case of control circuit failure
• High - Low Voltage Cut off [Optional]
• Inbuilt Surge Suppressor to suppress noise and spike
• Power On time Delay [Optional]
• Audible Alarm for High - Low Voltage Limits (Optional)
• Range starts from 1KVA to 400 KVA(Single and Three phase)
• Non Standard range (As per requirement) can be manufactured.

Charging the battery in modern days is not a difficult job but to charge the battery as per battery requirement is very important which not only charge the battery but also increase the life span of Battery .

“AQUILA” make battery Charger will get rid of all your charging related problems, even a lay man or non technical person can charge it as it is designed to charge it properly & person can charge is as it is designed to charge it properly & automatically with inbuilt protection with all possible faults. It is made user friendly by undertaking detailed study of individual requirement of every customer.

Applications:

• Communication Equipments
• Medical Equipments
• Laboratory Equipments
• Industrial Machines
• Home Appliances

We offer to our clients a range of Portable Compact SMPS Based Battery Charger, which functions on the theory of high frequency switching. These chargers are extremely efficient, compact in size and light weight. The chargers that we offer accept input voltage range of wide difference and provide almost disturbance free output. Being a client centric organization, we offer the facility of customization to our clients, wherein we can design and manufacture our range as per the specifications of our clients.

Electrical Fault Detector (Impedance Meter-Motor Checker)

When your AC / DC machine fails to work all you need is Fault Detector. This meter is helpful for detecting the shorting in winding of Electric Motor, Generator and Transformer. It can detect the partial Shorting, Unbalancing of current in poly phase winding without opening the motor.

Applications:

It is helpful in detecting the winding faults (comparing AC resistance) in poly phase machines in which the windings are identical and in same types of motor, generator and transformer.

• Dim.:200 x 130 x 60mm
• Dial : 95 x 45 mm
• Weight : 800 gms.
• Consumption : 0.36 watt

We have in store for our clients, a highly efficient range of SMPS/DC- DC Converters that is designed to drop DC pack voltage for the operation of the ancillary circuits. These converters are designed to meet the demands of households as well as commercial setups. Our SMPS/DC- DC converters are available in several specifications to meet the application demands of our clients.

Our clients can avail from us, a quality assured range of DC Power Source that is a universal current and voltage source. Used for testing, setting and calibrating electricity meters, our DC Power Source is a device that helps in low energy consumption. We offer our DC Power Source at most competitive prices to suit the pockets of our clients.

^{Our Own Product AQUILA LED type INDICATING LAMP & LED based AVIATION OBSTRUCTION LIGHTS,TOWER LIGHTS,Viz warning Lamp,Trafic Signals,etc....}OEM largely appreciates roof top lamps concept where a single prominent indication either with flashing or w/o flashing is required. AQUILA has developed warning lamps or roof top flasher lamps. The Solid State Flashing circuit is in built to make a compact design; roof top lamps with flashers are also available with buzzer.in AC & DC SUPPLY... 
ELECTRICAL DATA...FAA & ICAO norms Appruved.

No. Of LEDs: 400

Maximum forward current: 100mA
Typical power consumption: 8.8 W Maximum at 230V AC
Input voltage variability: Can withstand fluctuation of ±25%
PIV protection: LEDs internally protected against rev. voltages up to 1 kV
Insulation resistance: >200 megohms at 1000V
Dielectric strength: 2.5 kV
Earthing: Terminal provided inside body

Cable entry: ET 19mm,  I LUMINANCE @ 3300 LUX.

Our range of Multi Cable Tester is offered to our global clients at cost effective rates. These are designed and manufactured as per various national and international standards of quality and safety. We ensure that we understand the specific requirements of our clients as well as those of the application, for which, these will be used. It is only after gaining a comprehensive understanding that we initiate the designing and manufacturing processes.

We are offering clients a wide range of P. A. System Trolleys, which is used for SMPS POWER SUPPLY for Multi Media units like All India Radio & Door Darshan.These dual shaped systems are available with 4 wheel stable trolley system Owing to our advanced manufacturing facilities, we have been able to customize our range as per clients’ demands.Our organization is one of the leading manufacturers and exporters of a wide range of Power Supply Trolley. These are designed as per the current trends of the industry and cater to numerous sectors. We ensure that our range is designed as per the specific requirements of our clients and the manufacturing process is completed within the stipulated time frame.

Our organization is one of the leading manufacturers and exporters of a wide range of NITROGEN PURGING SYSTEM. These are designed as per the current trends of the industry and cater to numerous sectors. It is Available in Analog & Digital Metering.We ensure that our range is designed as per the specific requirements of our clients and the manufacturing process is completed within the stipulated time frame.

Automatic Voltage Regulator

PELF 2000 is a fully solid state and compact machine/panel mounting. Automatic Voltage Regulator module for almost all types of brush less alternator which is used for feeding excitation to regulating the terminal voltage of the alternator from no-load to full-load with great accuracy. It is especially designed for I.T. alternators.

Specifications:

Inputs - Power : B-phase and Neutral from alternator.

Sensing : R-phase and Y-phase from alternator.
Output : 110 V direct. Maximum continuous.: 6 A direct continuous.

Size : 210 mm x 95 mm x 30 mm

Weight : 1500 g.

Ti inject DC Supply for Brush less type of alternator
Input Volt : 400 V

Output Current : 50 Amp with Kepler (Surge Suppressor)

Rotating Diode Circuit (Big)
Suitable for Generator up to 625 KVA

Rotating Diode Circuit (Small)
Suitable for Generator up to 125 KVA

Block Diode Circuit
Suitable for Generator up to 62 KVA

Surge Suppressor
Integral Part of Diode Circuit
Loose Diode.