ARC Insulations & Insulators Private Limited

We offer a superior quality range of ECR Rods (Vacuum Fiber Reinforced Epoxy Pultrusion) which is available in the market in 2000, 4000 and 6000mm length. These ECR rods can also be made at any length at options with a tolerance no more than 5mm. Our range of product is manufactured through continuous pulling, mounding, heating and solidifying from alkali free synthesized before-plying-treated glass roving merged in epoxy and polyester compound gum. The size of the insulating rod ranges from ¦µ8-¦µ90mm.

Specifications:

• The nominal diameter are 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 30, 34, 36, 40, 45, 53, 60, 70, 80, 90
• Apperance: no bonding wire at the surface, any internal cracks and scars. The color unevenness on the surface and small amount of accumulated gum is allowable
• The core rod shall bare the machinery processing like sawing, drilling, milling and lathing

Parameters:

• Material Tested: ECR Fibre Glass Rod Dia 16mm
• Type: 100 KN
• test Standard: IEC61109; 1992-03

Applications:

• FRP Epoxy Pultruded rods are used extensively as the electrical insulation material in Reactor, Wave trap coil, Dry transformer, Synthetic insulator core rod and Zinc oxide thunder arrestor
• The products finds application in silastic insulator, disconnecting switch, disconnecting fuse, electrified railroad insulator, dry transformer, thunder arrestor and other high-voltage electric products and can be selected at the clients personal demands, Meanwhile it can be processed at clients options, i.e., notching, lathing and cutting.

• Plain type
• Fire-resistant type
• Acid-resistant type.
  

We provide a comprehensive range of FRP/fiberglass operating and discharging rods which is available in 2, 3 or 4 Section. These posses clamp which provides firm grip to conductor and Screw type or Push button type locking system. Manufactured using premium quality raw material, our range of fiberglass operating and discharging rods gets tested on various parameters before being delivered to the clients to ensure its superior quality and durability.

HT Earth Discharge Rods

Application: Earthing of High & Very high voltage lines and sub-stations

Material: Fiber glass epoxy bonded class 'F' insulation, having strong Electrical & Mechanical Strength

Features:

• Smooth glossy outer surface
• Available in 2, 3 or 4 Section
• Assembled height from 6 feet to 24 feet
• Screw type or Push button type locking system
• Type tested 650 KV CPRI, Banglore
• Rotating type adjustable line end clamp made out of Aluminum alloy
• Suitable for Cylindrical Conductor from 5mm to 50mm dia & 4" dia bus bar
• Clamp provides firm grip to conductor
• Metallic Earth end clamp for earthing to be fix up with M.S. Structure
• Transparent insulated copper cable with copper lugs from 10mm to 35mm

Parameter:

• Material Tested:
• Test Specification: IS 2071 (Part 1) 1993 RA 1999

Specifications:

We provide an extensive range of FRP/fiberglass pultruded tubes which is available in the market in various shapes such as square tubes, rectangular tube, beams( outer dia. from 1.0mm to 350 mm). Manufactured using premium quality raw material, these products comes in various colors which includes black, gray, red, orange, yellow, white, green and blue. Our range of fiberglass pultruded tubes can also be customized on the parameters of colors, design and unit length which could range from several millimeters to more than 30 kilometers.

Applications:

• Strong
• Light
• Never-rusting
• Designable
• Electric insulating
• Colorful

We offer a wide range of FRP/fiberglass sheet epoxy grade which is manufactured according to the NEMA G-10 and G-11 standards. These FRP/fiberglass sheet epoxy grade are available in standard sizes and in thickness ranging from 0.4 mm - 60 mm. With these products we also provide extra - long Sheets / strips of more than 2400 mm, without joints to coil support in Generators. Manufactured using EP2 / EP3 and GPO1/ GPO2 / GPO3 as per Indian standard IS1O192-1982, these are used widely for the for MV Switchgear applications.

Features:

• High tracking resistance (KA3C)
• High di-electric strength in view
• Fire-retardant grade laminates

Parameters:

Our range of gets tested on various parameters before being delivered to the clients. The various parameters on which we test our products are:

• Material Tested: Glass epoxy sheet EP 3 Grade / NIMA G10 grade

Type of Test:

• Cross breaking strength
• Compressive Strength
• Tensile Strength
• Shear Strength
• Water Absorption
• Temperature limit
• Test method: IS: 10192-82, Ep3 Grade, NEEMA L1 Grade

Characteristics and Applications:

• As per NEMA Grade G-10, mechanical, electrical and electronic applications; high strength under moderate temperature; good electrical properties under high humidity
• As per NEMA Grade FR-4, with high mechnical strength at room temperature, good electrical properties under dry and humidity conditions, flame retardant, suitable for mechanical, electrical and electrical and electronical applications
• As per NEMA Grade G-11, with high strength at room temperature and 150, good electrical properties under dry and humidity conditions, used for making insulating parts in electrical, electronical and other industries.

We are offering a superior quality range of fiberglass sheet/frp polyester grade (GPO-3) which is known for its excellent combination of high strength, flame resistance, and low smoke, flame, & toxicity generation. It is a NEMA approved material manufactured as per NEMA procedure NEMA LI-1 and is used as the industry standard for flame & arc/track resistant electrical components. Our range of fiberglass sheet polyester grade is known for its various features such as high arc and track resistance, highly flame resistant. The product we offer performs well in electrical applications that require high arc and carbon track resistance as well as flame resistance, physical strength, and moderate heat resistance.

Applications:

• Making of phase and end barriers
• Insulating supports
• Bus bar supports
• Mounting panels in switchgear
• Other types of electrical apparatus

Features:

• It is a UL recognized product with a temperature index of 120 degrees celsius electrical and 140 degrees celsius mechanical
• It is produced in three standard colors: red, black, and white
• It can be molded in thicknesses of 1/32?to 2
• It is used for general purpose electrical and/or mechanical applications where low cost is desired
• It can withstand higher temperatures better than GPO-1 or GPO-2

Specifications:

• For use on 2500+ voltage equipment
• 94V-O flame retardance rating
• 22,100 PSI flexural strength
• Red in color.