Arctech Electricals

We manufacture Stepless Regulator Arc Welding Air Cooled with following specifications:

Supply 2 Line 3 Phase	415	415	415
Maximum Continuous hand welding current @ 60% duty cycle Amp.	350	450	600
Maximum Rating KVA	20	26	30
Maximum Electrode Size (mm)	4.19	5.16	6.3
Minimum Electrode Size (mm)	2.5	2.5	3.4

We manufacture CO2 Welding Machines with following specifications:

Range : 300 to 600 Amps.

SALIENT FEATURES :

Standard Scope Of Supply :

Power Source	1 No.
Wire Feeder	1 No.
Welding Torch	1 No.
CO2 Gas Regulator Cum Flow Meter	1 No.
CO2 Gas Pre-Heater	1 No.
Welding cable Negative & Positive	1 N

• Three phase full wave bridge circuit for balance load.
• Easy connection system for torch plug-in to wire feeder.
• Wire feeder light weight, compact and easily portable.
• Coarse and fine voltage selector switches for precise voltage adjustment.
• Remote wire speed control.
• Sleek & highly flexible torch.

POWER SOURCE	301 VM	401VM	601 VM
Max. Rated Welding Current A	300	400	600
Max. Input Current A	15	20	28
Frequency Hz	50	50	50
Input Supply 380 to 440	3Ph	3Ph	3Ph
Duty Cycle %	60	60	60
Output current 60%	300	400	600
Output current 100%	225	310	450
KVA	13.5	20	25

We are engaged in manufacturing D.C. Tig Welding Machines/D.C. Tig Argon Welding Machines which is known for its effective functioning among our valued clients. Our D.C. Tig Welding Machines are extensively used in different industries and can be modified in compliance with client specifications and details.

Below mentioned are its salient features:

• Efficient electrical design
• Easily maneuverable
• Negligible maintenance
• High power factor & efficiency

Range : 300 to 600 Amps.

SALIENT FEATURES :

• Low power consumption.
• Good quality semi conductor device to ensure long life.
• Easy Starting with built-in high frequency unit.
• Stepless regulation of current.
• Excellent static & dynamic welding characteristic.

Optional :

• Standard set of accessories consisting of :-
  - 4 Mtrs. long welding cable and electrode holder.
  - 4 Mtrs. long welding cable for earthing.
• Three phase full wave bridge circuit giving steady wave with minimum ripple.
• Low current attachment for TIG welding applications according to application requirement.

Max. hand welding current at 60% duty cycle	Amp.	300	400	600
Max.automatic weldingCurrent at 100% duty cycle amp.	Amp.	230	315	450
Welding current Range	Amp.	50-300	60-400	80-600
Open Circuit voltage	volts	75	80	80
60% duty cycle	KVA	20	32	45
Input supply Voltage:380 to400 V	Phase	3	3	3
Frequency	Hz	50	50	50

We are engaged in fabricating Mig- Mag Welding Machine which is best suited for the solid and flux cored wires. It is appropriate for light and heavy duty fabrication and is extensively used in varied industrial applications. Moreover, this welding equipment is fabricated in compliance with international standards and can be delivered on time.

Following are its noteworthy features:

Range : 300 to 600 Amps.

Salient Features:

• Three phase full wave bridge circuit for balance load.
• Easy connection system for torch plug-in to wire feeder.
• Wire feeder light weight, compact and easily portable.
• Coarse and fine voltage selector switches for precise voltage adjustment.
• Remote wire speed control.
• Sleek & highly flexible torch. 

We provide highly capable portable suspension spot welding machine which helps in joining assemblies of two or more metals at higher speeds. Sourced from reliable vendors, we use quality raw material in the production of our gamut. Furthermore, it can be easily customized in accordance with client requirement and can be delivered on time.

Specifications:

Input supply	200 Amp
Maximum Amp.	180
Electrode Size (mm)	10, 12

We manufacture spot cum projection welding machine with following specifications and features.

Range	30 K.V.A to 200 K.V.A
Nominal Throat Depth	300 - 900 mm
Application	Spot & Projection welding, Nut welding, Automobie components & sheet metal components etc.
SALIENT FEATURES :	All operational controls - air water and solid state electronic - arc machine mounted for easy acess, safe and simple maintenance Weld sequence controller, sophisticated Quartz timer with squeeze, weld, hold and off timings with single/repeat cycle facility, weld timing being controlled by thyristor circuit, heat controllable from 20% to 100%. Descent of he upper electrode to any desired speed and completely eliminated hammer blow.

 

Input supply 3phase 2 line	415-v	415-v	415-v	415-v	415-v	415-v
Nominal Cap. (KVA)	30	50	75	100	150	200
Nominal Primary Current (Amp)	65	120	185	235	350	450
Supply Cable Size (Alunimium 2 core) mm	25	50	80	100	120	135
Air Supply Max. Pressure Kg/Cm2	5.5	5.5	5.5	5.5	5.5	5.

We are engaged in fabricating spot welding machine which is highly appreciated for its efficient functioning among our valued clients. This welding equipment includes solid state electronic timer which helps in controlling the weld time from 5 to 50 cycles and 1 to 10 seconds to attain precise and repeatable spots.

Specifications:

Range	10 K.V.A to 35 K.V.A
Nominal Throat Depth	300 - 750 mm
Model	VSW (P)
Transformer	The spot welding transformer fitted with its double round heavy duty Air cooled step down transformer with high grade electrical stamping sheets provided with electrical copper winding of primary coils, the regulator is provided on the primary side with 8 stag

 

Input supply Voltage	220 - 415	220 - 415	415	415
KVA rating 60% duty cycles	10	15	25	35
Nominal Throat Depth (mm)	300	400	500	750
Spot capacity combined
Thickness Sheet Max.	2 x 1.65	2 x 2.11	2 x 2.76	2 x 3.25
Thickness Sheet Min.	2 x 3.6	2 x 4.6	2 x .56	2 x .65
Spot Welding
Thickness Sheet Max.	2 x 3.4	2 x 5	2 x 6.5	2 x 7.5

This welding equipment us used for special purpose as automatic Submerged Arc Welding Machine with mounted trolley head. Widely used in gas cylinder manufacturing plants.

• Machine with current rating from 600 to 1200 Amps.
• Custom built fixtures can also be provided.

SALIENT FEATURES :

• Low power consumption.
• Good quality semi conductor device to ensure long life.
• Easy Starting with built-in high frequency unit.
• Stepless regulation of current.
• Excellent static & dynamic welding characteristic.
• Optional :
• Low current attachment for TIG welding applications according to application requirement. Standard set of accessories consisting of :-
  - 4 Mtrs. long welding cable and electrode holder.
  - 4 Mtrs. long welding cable for earthing.

Three phase full wave bridge circuit giving steady wave with minimum ripple.

Max. Rated Welding Current	400	600
Max. Input Current A	20	28
Frequency Hz	50	50
Input Supply 380 to 440	3Ph	3Ph
Duty Cycle %	60	60
Output current 60%	400	600
Output current 100%	310	450
KVA	20	25
Open Circuit Voltage DC	18-55	20-60
Cooling	Forced Air	Forced Air
Applicable Wire	0.8,1.2,1.4	0.8,1.2,1.4,1.6