Arham Scientific Co.
Mumbai, Maharashtra
Home»Our Products»

Coating Inspection Equipment - Elcometer, UK

We are offering a quality range of Elcometer Inspection Instruments to our clients.


Cross Hatch Cutter Elcometer

Cross Hatch Cutter Elcometer
Cross Hatch Cutter Elcometer

Item Code: Elcometer107

‘ELCOMETER’ UK Make Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

  • Robust design
  • Large, non slip grip
  • Ideal for thin, thick or hard coatings
  • A quick change, 4 sided cutter allows adhesion testing on a wide range of coating thicknesses (1mm, 1.5mm, 2mm and 3mm separate cutting tools)
  • Available in two kits (basic and Full)

Basic kit Model Elcometer 107
(Cat No. F10713222). Supplied Complete with Robust handle, cutter, hexagonal wrench, presentation storage case and instructions (together with Classification of Adhesion Test Results chart)

Ordering information
F10713222-1 Basic Kit (6 x 1 mm) ISO 0 - 60µm
F10713222-2 Basic Kit (11 x 1 mm) ASTM 0 - 50µm
F10713222-3 Basic Kit (11 x 1.5 mm)
F10713222-4 Basic Kit (6 x 2 mm) ISO & ASTM 50 - 125µm
F10713222-5 Basic Kit (6 x 3 mm) 121 - 250µm
Calibration NABL Calibration certificate for cutter all 4 - sides
(Essential accessories: adhesive tape as per ASTMD or ISO standard is required for testing)

FULL kit Model Elcometer 107 (Cat No. F10713348) Robust handle, cutter, hexagonal wrench, instructions (together with Classification of Adhesion Test Results chart), eye glass, brush and adhesive tape (either ASTM or ISO tape), all in a plastic ABS carry case

Ordering Information
F10713348-1 Full Kit with ASTM Tape (6 x 1 mm) 0 - 50µm
F10713348-2 Full Kit with ASTM Tape (11 x 1 mm) 0 - 50µm
F10713348-4 Full Kit with ASTM Tape (6 x 2 mm) 50 - 125µm
F10713348-6 Full Kit with ISO Tape (6 x 1 mm) 0 - 60µm
F10713348-9 Full Kit with ISO Tape (6 x 2 mm) 0 - 120µm
Calibration NABL Calibration certificate for cutter all 4 - sides

Surface Profile Comparator - SA2.5

Surface Profile Comparator - SA2.5
Surface Profile Comparator - SA2.5

These extremely durable comparators allow the estimation of surface roughness of either grit and shot blasted surfaces. Using the Elcometer 125 surface comparators as a reference the blasted profile can be compared to the four reference profile grades in each comparator.

Profiles are recorded in microns.

  • 4 Roughness Values per Comparator
  • Elcometer Grit Surface Comparator 25, 60, 100, 150µm
  • Elcometer Shot Surface Comparator 25, 40, 70, 100µm
Can be used in accordance with:
AS 3894.5, ASTM D 4417-A, IMO MSC.215(82), IMO MSC.244(83), ISO 8503-1, ISO 8503-2

Dew Point Meter

This rugged gauge is designed to measure and record all relevant climatic parameters required to determine whether the conditions are suitable for painting. The Elcometer 319 can be used as a hand-held gauge or a stand alone data logger - ideal for monitoring climatic conditions over a period of time.

  • Integrated magnets allow remote data monitoring on steel substrates
  • Store 25,000 records in up to 999 batches
  • USB and Bluetooth data output to a PC or PDA
  • Dustproof and waterproof gauge with fully sealed sensors (equivalent to IP66)
  • Visual and audible indication of user defined limits against any or all parameters
  • Easy to use, intuitive multi-lingual menu structure
  • A hand-held Dewpoint meter with manual and interval data logging in one gauge
  • Large, customer definable illuminated display operates over the full temperature range
  • Measure and record climatic parameters:
    - Relative humidity
    - Air temperature
    - Surface temperature
    - Dewpoint temperature
    - TΔ (the difference between surface temperature and dewpoint)
    - Dry Bulb temperature
    - Wet Bulb temperature

Coating Thickness Gauge

Coating Thickness Gauge
Coating Thickness Gauge

Item Code: DFTMeter

Elcometer, UK make Coating Thickness Gauge are available in variety of combinations of top, standard and basic functionally along with a wide range of separate plug in probes and integral (built in) as per the needs of the application. Our range of product consit of the following Range of Separate probe options, Plug in Probes, Gauge Feature, Standard, Separate Gauges, Minature and Integral Gauges.

In the Section of Elcometer 456 range is explained as follow:
  • Gauge Feature
  • Integral Gauges
  • Separate Gauges
  • Range of Separate probe options
  • Standard
  • Minature
  • Plug in Probes

Wet Film Thickness wheel (WFT gauge)

Wet Film Thickness wheel (WFT gauge)
Wet Film Thickness wheel (WFT gauge)

The Elcometer 3230 Wet Film Wheel is a high precision, accurate and easy to use instrument which consists of a set of three wheels. The central wheel is of a smaller diameter and is eccentric relative to the two outer wheels.

By rolling the gauge through a wet coating, the centre wheel eventually touches the film. This point on the scale indicates the thickness.

A convenient mounting handle for the wheel is available in two lengths; 15cm (6”) & 50cm (19”); please order separately.

When the volume to solids ratio of the coating is known (generally found on the product data sheet supplied by the manufacturer), the wet film thickness can be used to predict the dry film thickness.

Several measurement ranges between 0 to 25µm and 0 to 3000µm (0 to 1mil and 0 to 40mils) are available.

  • Continuous scale produces ±5% measurement accuracy
  • Suitable for flat and curved surfaces

Using a wet film wheel:

Roll the wheel through a wet coating, the centre wheel eventually touches the film. This point on the scale indicates the thickness.
When the volume to solids ratio of the coating is known, generally found on a product data sheet, the wet film thickness can be used to predict the dry film thickness.

Available in various ranges..

Dew Point Calculator

The dew point calculate provide a convenient method of converting temperature values from the whirling hygrometer to dew point and percentage relative humidity in an easy to use plastic circular slide rule Range - 100°C to +50°C

Pictorial Surface Standards

Pictorial Surface Standards
Pictorial Surface Standards

Elcometer’s range of Surface Standards covers most of those required for surface cleanliness.

Surface Standards include:

  • BS EN ISO 8501-1:2007/SIS 055900
  • BS EN ISO 8501-4:2006
  • The SSPC Standard - VIS 1
  • The SSPC Standard - VIS 2
  • The SSPC Standard - VIS 3
  • The SSPC Standard - VIS 4
  • The SSPC Standard - VIS 5

Magnetic Thermometer

The Elcometer 113 Magnetic Thermometer continuously indicates the surface temperature of steel and other magnetic material.

The thermometers are based on a bimetallic strip and therefore do not require batteries but do require time to adjust to the temperature.

Available in a number of scale ranges, the Elcometer 113 is also available as an economy version.

Salt Contamination Meter (SCM Meter)

Salt Contamination Meter (SCM Meter)
Salt Contamination Meter (SCM Meter)

Item Code: Elcometer130

The Elcometer 130 Salt Contamination Meter quickly and accurately measures the level of soluble salts on surfaces.

  • Fast reading rate allows multiple tests to be completed efficiently
  • Pressure plate ensures a constant and uniform pressure to paper
  • Automatic detection of paper size and automatic adjustment of reading value
  • USB and Bluetooth® data output to ElcoMaster™ 2.0 software
  • Dust and water resistant rugged design equivalent to IP64
  • Automatic temperature compensation ensures accurate results
  • Non-oxidising gold plated contacts ensures lifetime accuracy
  • Stores up to 150,000 readings in 2,500 alpha numeric batches
  • Fully portable hand-held, ergonomic design ideal for use in the field

Surface Roughness Tester

Surface Roughness Tester
Surface Roughness Tester

In protective coating applications there is a requirement to measure surface roughness.

Measurements of Surface Roughness are expressed in terms of Ra, Rz or Tp. These values include peak-to-valley profile measurement in combination with an assessment of the frequency of peaks within the sample area.

The Elcometer 7061 is a light weight and portable measuring solution for the range of surface roughness measurements required for compliance to International Standards.

The unit is also suitable for assessing surface roughness conditions in a wide range of general industrial applications; particularly where the sample is too large to bring to the laboratory.Multi-Lingual Display: All the required information is displayed on screen in a choice of 14 languages.

  • Flexible: Can be used in virtually any position; horizontally, vertically, upside down. A height adjustment accessory to accommodate various sample sizes is supplied with each gauge as standard.
  • Integrated Calibration Standard: No external calibration standard is required; provides greater ease of use.
  • Drive Unit: Can be rotated and moved longitudinally; enables the stylus pick-up to be moved to the calibrating position. The stylus pick-up is also protected for transport in this position.
  • Stylus pick-up with removable protection: 2μm (80μin) diamond stylus tip with a measuring force of 0.7 mN. Different stylus’ are available for various applications.
MarSurf PS1 Surface Roughness Tester
Unit of Measurement : Metric, inch
Measuring Principle     Stylus Method
Parameters     24 (with tolerance limits): Ra, Rq, Rz equiv. to Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME),Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr equiv. to Tp (JIS,
ASME), RSm, R, Ar, Rx
Measuring range     350μm, 180μm, 90μm
Profile resolution     32nm, 16nm, 8nm
Calibration function     Dynamic
Memory capacity     Max. 15 profiles, max. 20,000 results
Other functions     Blocking of settings (code-protected), date/time
Battery     Li-ion battery
Interfaces     USB, MarConnect (RS232)
Dimensions     140mm × 50mm × 70mm (5.51” × 1.97” × 2.76”)
Weight     400g (0.88lbs)
Long-range power supply     100V to 264V
Packing List     Elcometer 7061 MarSurf PS1 base unit, drive unit, 1 x standard stylus pick-up, built-in
battery, roughness standard integrated into casing, height adjustment accessory, stylus
pick-up protection, universal charger / mains adapter, USB cable, carry case with shoulder
strap and belt loop, calibration certificate and operating instructions

Can be used in accordance with:
ASTM D4417, ASME B46, DIN 4768, EN 10049, ISO 4287, ISO 4287/1, JIS B 0601<

Digital Surface Profile Gauge

Digital Surface Profile Gauge
Digital Surface Profile Gauge

Digital Surface Profile Gauge

The Elcometer 224 provides the very latest in surface profile measuring technology. Accurate, fast and very user friendly, this gauge is available with or without memory. The Elcometer 224 Top model is available with wireless technology and can store up to 50,000 readings in 999 batches.

  • Fast reading rate at 40+ readings per minute.
  • Accurate, immediate and repeatable results.
  • Intuitive menus in multiple languages enables use straight from the box.
  • Large backlit screen makes viewing readings easy.
  • Digital display prevents reading interpretation errors.
  • Measure profiles upto 500µm (20 mils) in a single gauge.
  • Tough tungsten carbide user replaceable tip, can be used for up to 20,000 readings.
  • Counted average mode stores the average value of a preset number of readings.
  • Statistics are calculated and displayed in real time.
  • Readings can be downloaded to a PC and reports created in seconds.
  • Store upto 50,000 readings in 999 batches.
  • Bluetooth® wireless technology & RS232 data output for cable free data transfer.
  • Cost per test is significantly lower than other test methods.

 

Elcometer 224 S Digital Surface Profile Gauge

The Elcometer 224 S Digital Surface Profile Gauge provides an accurate way to measure surface profiles in microns and mils and is an ideal gauge for checking the quality of the surface profile.

The gauge displays statistical values as readings are taken, giving rolling statistics. The intuitive menu system, in over 20 languages, makes this gauge user friendly.

The tungsten carbide tip will last for up to 20,000 readings and can then be easily replaced by the user in the field.

Elcometer 224 T Digital Surface Profile Gauge

The Elcometer 224 T works in the same way as the Elcometer 224 S, but has the advantage of a large inbuilt memory to accurately record each measurement and offers Bluetooth® wireless technology for cable free data transfer.

The memory is able to store up to 50,000 readings in 999 batches. This enables readings to be automatically stored - ideal for measuring large surface areas.

A statistical analysis is also displayed on the gauge and stored within each batch. Data can be downloaded to a PC and, using the ElcoMaster™2.0 Software, which is supplied free of charge with this gauge, detailed reports can be created in seconds. Data can also be transferred to a spreadsheet. With the supplied ElcoMaster™ & ElcoMaster™ Mobile Software, you are able to e-mail data directly to the office from the field with a PDA.

The Elcometer 224 T operates in one of three modes; immediate, batch or counted average.

  • Intermediate mode: Takes readings an calculates statistics but does not store any readings in the memory (this is known as rolling statistics).
  • Batch mode: Takes measurements and stores the individual readings and the statistical analysis in the memory. Batch mode, or batching, allows data to be collected in groups to allow easier analysis of large or complex structures. The Elcometer 224 T has the memory capacity for a total of 50,000 readings in up to 999 batches.
  • Counted average mode: Automatically calculates the average value of a pre-determined number of readings. Each of these averages is recorded within the batch and stored in the memory
Range    0µm-500µm (0mils-20mils)
Accuracy    ±5% or ±5µm (±0.2mil)
Resolution    1µm (0.1mil)

Can be used in accordance with:
ASTM D 4417-B, SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000

Surface Moisture Meter

Surface Moisture Meter
Surface Moisture Meter

The Elcometer 118/2 Surface Moisture Meter is a hand held instrument which instantly and accurately measures moisture content in wood by-products, wood and building materials such as roofing, insulation, plaster and brick.


The Elcometer 118/2 features:

  • Inbuilt electrodes allowing the gauge to be used immediately, saving time
  • Quick, accurate results using conductivity measurement method
  • Lightweight aluminum moisture meter which can easily be carried on site
Measuring Range     Up to 42% wood moisture content*
Accuracy                 ±1.5%
Battery Supply         9V alkaline battery (6F22 [PP3] type)
Battery Life             72 hours continuous
Certificate available Certificate of Test - for variable calibration equipment and supplied with readings. A Certificate of Inspection states the instrument is tested in accordance with our procedures.
Packing List             Elcometer 118/2 Moisture Meter, 9V PP3 battery, fabric carry case, calibration certificate and operating instructions

DFT Meter

The new Elcometer 456 Coating Thickness Gauge sets new standards making measuring dry film thickness faster, reliable and accurate; helping you to become more efficient.

Easy

Large buttons ideal for gloved hands

Easy to use menus in multiple languages

High contrast colour LCD with auto rotate

High and low reading limit indicators

Factory calibrated for immediate use

Accurate

Measurement Capability to ±1%

Conforms to national & international std

Temperature stable measurements

Increased reading resolution for thin coatings

Measures accurately on smooth, rough, thin and curved surfaces

Reliable

Repeatable and reproducible

2 year gauge warranty

Supplied with fully traceable test certificates

Batch date and time stamp facility

Rugged

Sealed, heavy duty and impact resistant

Dust and waterproof equivalent to IP64

Scratch and solvent resistant display

Durable gauge and probe construction

Suitable for use in harsh environments

Efficient

Fast reading rate of 70+ per minute, 140+ per minute with Ultra/Scan Probe

Multiple calibration memories

Alpha numeric batch identification

User selectable calibration methods

Compatible with ElcoMaster™ 2.0 and ElcoMaster™ Mobile App

Powerful

Wide range of interchangeable probes

USB and Bluetooth™ data output to iPod, iPhone and iPad or Android™ mobile devices

Stores up to 150,000 readings in 2,500 batches

Measures up to 30mm (1200mils) of coating on metal substrates


Cross Hatch Cutter

The Elcometer 107 Cross Hatch Cutter provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

  • Robust design
  • Large, non slip grip
  • Ideal for thin, thick or hard coatings
  • A quick change, 4 sided cutter allows adhesion testing on a wide range of coating thicknesses (1mm, 1.5mm, 2mm and 3mm)

The Elcometer 107 Cross Hatch Cutter is available as a Basic or Full Kit.

Wet Film Thickness Gauge (WFT Gauge)

Wet Film Thickness Gauge (WFT Gauge)
Wet Film Thickness Gauge (WFT Gauge)

Elcometer 112 & 3236 Hexagonal Wet Film Combs. These hexagonal precision formed stainless steel wet film combs are long lasting and reusable and are supplied in a range of thicknesses measuring up to 3000µm (120mils).


These six sided combs vary in size, giving either 24 or 36 measurement steps, depending on the comb, providing increased accuracy.

 

Using a wet film comb

Place a comb perpendicular to and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are wet. Remove the comb from the film.  The wet film thickness lies between the biggest value ‘coated’ or ‘wet’ tooth and the smallest value ‘uncoated’ or ‘dry’ tooth.

Surface Profile Gauge

Surface Profile Gauge (Diall)

This easy to use gauge measures the peak-to-valley height of a blast cleaned surface.

The average of a series of measurements provides an indication of the surface roughness and allows the surfaces to be compared as blasting proceeds.

Elcometer 123 Surface Profile Gauge, Metric Version
Elcometer 123 Surface Profile Gauge, Imperial Version
Range     0 - 1000µm  (0 - 40mils)
Scale     2µm (0.1 mil)
Dimensions    105 x 55 x 25mm (4.1 x 2.2 x 1”)
Weight          335g (8oz)
Certificate Available
Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability.

Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory.

Packing List
Elcometer 123 Surface Profile Gauge, glass slide, 2mm allen key, carry case and operating instructions

Can be used in accordance with
ASTM D 4417-B, SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000

Protective Coatings Inspection Kit

Protective Coatings Inspection Kit
Protective Coatings Inspection Kit

Item Code: YKIT-PROTECTIVE-1M

The Elcometer range of Protective Coatings Inspection Kits provide all the tools required for onsite inspection of a coating, including surface profile, dew point, relative humidity, adhesion and both wet and dry film thickness.
Available as metric or imperial kits and housed in a sturdy, light - weight carry case, Elcometer Protective Coatings Inspection Kits are invaluable to the operator in the field to ensure the coating is, or has been, applied correctly and is fit for purpose, removing the need for guesswork.

Protective Coatings Inspection Kit 1
Elcometer 122 Testex Replica Tape - Coarse, 20 - 64µm (0.5 - 2.5mils)
Elcometer 122 Replica Tape - X-Coarse, 38 - 115µm (1.5 - 4.5mils)
Elcometer 124 Thickness Gauge
Elcometer 116 Whirling / Sling Hygrometer
Elcometer 114 Dewpoint Calculator
Elcometer 212 Digital Thermometer °C (°F) with surface probe
Elcometer 107 Cross Hatch Cutter
Elcometer 112 Hexagonal Wet Film Comb 25 - 3000µm (0 - 120mils)
Elcometer 456 Integral Digital Coating Thickness Gauge Model B Ferrous 0 - 1500µm (0 - 60mils)



Other Information
  • Minimum Order Quantity: 1 Set

Protective Coatings Inspection Kit

Protective Coatings Inspection Kit
Protective Coatings Inspection Kit

Item Code: YKIT-PROTECTIVE-2M

The Elcometer range of Protective Coatings Inspection Kits provide all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness.

Available as metric or imperial kits and housed in a sturdy, light-weight carry case, Elcometer Protective Coatings Inspection Kits are invaluable to the operator in the field to ensure the coating is, or has been, applied correctly and is fit for purpose, removing the need for guesswork.

Protective Coatings Inspection Kit 2 Standard
Elcometer 122 Testex Replica Tape - Coarse, 20 - 64µm (0.5 - 2.5mils)
Elcometer 122 Testex Replica Tape - X-Coarse, 38 - 115µm (1.5 - 4.5mils)
Elcometer 124 Thickness Gauge
Elcometer 224 Integral Digital Surface Profile Gauge Model B 0 - 500µm (0 - 20mils)
Elcometer 319 Digital Dewpoint Meter Standard
Elcometer 112 Hexagonal Wet Film Comb 25 - 3000µm (1 - 120mils)
Elcometer 107 Cross Hatch Cutter
Elcometer 456 Ferrous Separate Digital Coating Thickness Gauge Model S
Elcometer 456 Ferrous Standard Separate Probe 0 - 1500µm (0 - 60mils), ElcoMaster™ 2.0 Software CD and USB Cable

Protective Coatings Inspection Kit 2 Top
Elcometer 122 Testex Replica Tape - Coarse, 20 - 64µm (0.5 - 2.5mils)
Elcometer 122 Testex Replica Tape - X-Coarse, 38 - 115µm (1.5 - 4.5mils)
Elcometer 124 Thickness Gauge
Elcometer 224 Separate Digital Surface Profile Gauge Model T
Elcometer 224 Standard Separate Probe, 0 - 500µm (0 - 20mils)
Elcometer 319 Digital Dewpoint Meter Top
Elcometer 112 Hexagonal Wet Film Comb 25 - 3000µm (1 - 120mils)
Elcometer 107 Cross Hatch Cutter
Elcometer 456 Ferrous Separate Digital Coating Thickness Gauge Model S
Elcometer 456 Ferrous Standard Separate Probe 0 - 1500µm (0 - 60mils), ElcoMaster™ 2.0 Software CD and USB Cable



Other Information
  • Minimum Order Quantity: 1 Set

Protective Coatings Inspection Kit

Protective Coatings Inspection Kit
Protective Coatings Inspection Kit

Item Code: YKIT-PROTECTIVE-3M

The Elcometer range of Protective Coatings Inspection Kits provide all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness.

Available as metric or imperial kits and housed in a sturdy, light-weight carry case, Elcometer Protective Coatings Inspection Kits are invaluable to the operator in the field to ensure the coating is, or has been, applied correctly and is fit for purpose, removing the need for guesswork.

Protective Coatings Inspection Kit 3 Standard
Elcometer 224 Integral Digital Surface Profile Gauge Model B 0 - 500µm (0 - 20mils)
Elcometer 319 Digital Dewpoint Meter
Elcometer 115 Wet Film Combs,
Set of 4 20 – 325µm, 50 – 450µm, 50 – 750µm & 125 – 1250µm
(1 – 13mils, 2 – 18mils, 2 – 30mils & 5 – 50mils)
Elcometer 107 Cross Hatch Cutter
Elcometer 456 Dual FNF Separate Digital Coating Thickness Gauge Model T
Elcometer 456 Dual FNF Standard Separate Probe 0 - 1500µm (0 - 60mils) ElcoMaster™ 2.0 Software CD and USB Cable

Protective Coatings Inspection Kit 3 Top
Elcometer 224 Separate Digital Surface Profile Gauge Model T
Elcometer 224 Standard Separate Probe, 0 - 500µm (0 - 20mils)
Elcometer 319 Digital Dewpoint Meter Model T
Elcometer 115 Wet Film Combs, Set of 4 20 – 325µm, 50 – 450µm, 50 – 750µm & 125 – 1250µm
(1 – 13mils, 2 – 18mils, 2 – 30mils & 5 – 50mils)
Elcometer 107 Cross Hatch Cutter
Elcometer 456 Dual FNF Separate Digital Coating Thickness Gauge Model T
Elcometer 456 Dual FNF Standard Separate Probe 0 - 1500µm (0 - 60mils), ElcoMaster™ 2.0 Software CD & USB Cable



Other Information
  • Minimum Order Quantity: 1 Set

Protective Coatings Inspection Kit

Protective Coatings Inspection Kit
Protective Coatings Inspection Kit

Item Code: YKIT-PROTECTIVE-4

The Elcometer Protective Coatings Inspection Kit 4 provides a range of test equipment to help an inspector assess a substrate prior to the application of a coating.

Measurement parameters include:

  • Surface inspection
  • Weld inspection
  • Surface cleanliness
  • Climatic conditions
  • Surface profile
  • Coating thickness

Protective Coatings Inspection Kit 4
Elcometer 128 Pictorial Standards
Elcometer 131/1C Telescopic Inspection Mirror
Elcometer 144 Paint Safe Marker Pens (Pack of 3)
Elcometer 147 Weld Gauge
Elcometer 142 Dust Tape Test Kit
Elcometer 138 Bresle Salt Kit² (Supplied with Bresle Samplers not Bresle Patches)
Elcometer 319 Digital Dewpoint Meter with Magnetic Surface Probe, Top
Elcometer 224 Integral Digital Surface Profile Integral Gauge, Model T
Elcometer 112 Hexagonal Wet Film Comb: 25 - 3000µm (1 - 120mils)
Elcometer 456 Separate Digital Coating Thickness Gauge with F2 Standard Probe, Ferrous Model T


Protective Coatings Inspection Kit 5

Protective Coatings Inspection Kit 5
Protective Coatings Inspection Kit 5

A more comprehensive kit than kits 1-4, the Elcometer Protective Coatings Inspection Kit 5 expands the range of instruments available to the protective coatings inspector.

Measurement parameters include:
Material thickness
Surface inspection
Weld inspection
Surface cleanliness
Surface profile
Climatic conditions
Coating thickness
Adhesion

Protective Coatings Inspection Kit 5
Elcometer 204 Steel Ultrasonic Thickness Gauge
Elcometer 128 Pictorial Standards
Elcometer 131/1C Telescopic Inspection Mirror
Elcometer 137 Illuminated Magnifier
Elcometer 144 Paint Safe Marker Pens (Pack of 3)
Elcometer 147 Weld Gauge
Elcometer 142 Dust Tape Test Kit
Elcometer 138 Bresle Salt Kit²
Elcometer 138/2 Surface Contamination Kit
Elcometer 122 Testex Tape, Coarse & Extra Coarse
Elcometer 124 Thickness Gauge
Elcometer 224 Digital Surface Profile Separate Gauge & Standard Separate Probe, Model T
Elcometer 319 Digital Dewpoint Meter, with Magnetic Surface Probe, Top
Elcometer 112 Hexagonal Wet Film Comb: 25 - 3000µm (1 - 120mils)
Elcometer 456 Separate Digital Coating Thickness Gauge with F2 Standard Probe, Ferrous Model T
Elcometer 121 Paint Inspection Gauge with Cross Hatch Cutters 6 x 1, 2 & 3mm and ISO (ASTM) Adhesive Tape, Top

Protective Coatings Inspection Kit 6

Protective Coatings Inspection Kit 6
Protective Coatings Inspection Kit 6

The Elcometer Protective Coatings Inspection Kit 6 is a comprehensive kit which incorporates all the key gauges and inspection accessories required to assess a structure before, during and after coating has been applied.

Measurement parameters include:

Material thickness
Surface inspection
Weld inspection
Surface cleanliness
Surface profile
Climatic conditions
Coating thickness
Adhesion
Pinhole detection

Protective Coatings Inspection Kit 6
Elcometer 204 Steel Ultrasonic Thickness Gauge
Elcometer 128 Pictorial Standards
Elcometer 131/1C Telescopic Inspection Mirror
Elcometer 137 Illuminated Magnifier
Elcometer 144 Paint Safe Marker Pens (Pack of 3)
Elcometer 147 Weld Gauge
Elcometer 142 Dust Tape Test Kit
Elcometer 138 Bresle Salt Kit²
Elcometer 138/2 Surface Contamination Kit
Elcometer 122 Testex Tape, Coarse & Extra Coarse
Elcometer 124 Thickness Gauge
Elcometer 224 Digital Surface Profile Separate Gauge & Standard Separate Probe, Model T
Elcometer 319 Digital Dewpoint Meter, with Magnetic Surface Probe, Top
Elcometer 112 Hexagonal Wet Film Comb: 25 - 3000µm (1 - 120mils)
Elcometer 456 Separate Digital Coating Thickness Gauge with F2 Standard Probe, Ferrous Model T
Elcometer 121 Paint Inspection Gauge (Top) with Cross Hatch Cutters 6 x 1, 2 & 3mm & ISO (ASTM) Adhesive Tape, Top
Elcometer 270 Pinhole Detector (9 , 67.5 & 90V)

Protective Coatings Inspection Kit for Hazardous area

Protective Coatings Inspection Kit for Hazardous area
Protective Coatings Inspection Kit for Hazardous area

The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited.

The kit provides all the tools required for the on-site inspection of a coating, including surface profile, dewpoint, relative humidity, both wet and dry film thickness and also adhesive testing.

Measurement parameters include:

  • Surface inspection
  • Surface profile
  • Surface contamination
  • Climatic conditions
  • Coating thickness
  • Adhesion

Protective Coatings Inspection Kit for Hazardous area

Elcometer 128 Pictorial Standards
Elcometer 125 Surface Comparator, Grit
Elcometer 125 Surface Comparator, Shot
Elcometer 122 Testex Tape, Coarse
Elcometer 122 Testex Tape, Extra Coarse
Elcometer 124 Testex Dial Thickness Gauge
Elcometer 131/1C Telescopic Inspection Mirror
Elcometer 134 Chlor*Test Surface Testing Kit
Elcometer 113 Magnetic Thermometer °C (°F)
Elcometer 116 Whirling Hygrometer °C (Metric), Sling Hygrometer °F (Imperial)
Elcometer 114 Dewpoint Calculator
Elcometer 112 Hexagonal Wet Film Comb: 25 -3000µm (1 - 120mils)
Elcometer 211 Thickness Gauge
Elcometer 107 Cross Hatch Full Kit - ISO (ASTM) Tape, Brush & Eye Glass

Qualicoat Powder Coating Inspection Kit

Qualicoat Powder Coating Inspection Kit
Qualicoat Powder Coating Inspection Kit

Item Code: YKITQUALICOAT-1B

The Qualicoat Organist brings together the ideals of several national coating associations into one quality label for the powder coating applied to aluminium architectural applications. The aim of Qualicoat is to establish the minimum standard that plant installations, coating materials and finished products which have been powder coated must meet.

Within this quality label, Qualicoat identifies a range of inspection requirements to be undertaken with regards to the quality control of powder coated products.

The Elcometer Qualicoat Powder Coating Inspection Kit provides the various test instrumentation required to meet the high standards of this organisation.

Qualicoat Powder Coating Inspection Kit
Elcometer 406L Statistical Mini Glossmeter: 60°
Elcometer 3095 Buchholz Hardness Tester
Elcometer 1506 Mandrel Bend Tester with 5mm and 8mm (0.20 and 0.31”) Mandrels
Elcometer 1615 Base Unit and Tube Assembly and Kit B: ISO 6272/2 and BS 6496
Elcometer 415 FNF Integral Digital Coating Thickness Gauge for smooth surfaces (Supplied in Qualicoat Basic Kit only)
Elcometer 1620 Manual Cupping Tester - Dial Gauge, mm/mils
Elcometer 1542 Cross Cut Set 6 x 1, 2, 3mm with ISO or ASTM Adhesive Tape
Elcometer 215 Oven Data Logger Standard & Top Kit†
Elcometer 456 Model T Dual FNF Separate Digital Coating Thickness Gauge with FNF
Scale 1 Standard Probe; 0-1500µm / 0-60mils (Supplied in Qualicoat Top Kit only)


Grind Gauge (Hegman Gauge)

Grind Gauge (Hegman Gauge)
Grind Gauge (Hegman Gauge)

The Elcometer 2020 & Elcometer 2041 Fineness of Grind Gauges are instruments used to determine the particle size and fineness of grind of many materials including paints, pigments, inks, coatings, chocolates and other similar products.

These two channel gauges, together with the scrapers, are made of hardened stainless steel and have two grooves with a graded slope (dependent on the model chosen).  Graduated in microns, mils, NS (Hegman) or PCU (North), the gauges have a tolerance of ±2µm (0.08mil).  The groove width for all models is 12mm (0.47”) with a groove length of 127mm (5.0”).

Elcometer 2041: The basic gauge has lateral graduations engraved on the side of the gauge in mils or microns.

Elcometer 2020:  The standard gauge shows graduations in microns or mils, NS and PCU which are all engraved on the top of the gauge.

Model                      um    Graduation (um/mill)
Elcometer 2041/1     0-15    1     -
Elcometer 2041/2     0-25    2.5     0.1
Elcometer 2041/3     0-50    5     0.2
Elcometer 2041/4     0-100  10     0.5
Elcometer 2020/3     0-15    1     -
Elcometer 2020/4     0-25    2.5     0.1
Elcometer 2020/1     0-50    5     0.2
Elcometer 2020/2     0-100  10     0.5

Dimensions     180 x 40 x 12mm (7.1 x 1.6 x 0.5”)
Weight     1.36kg (3lb)
Certificate Available     Certificate of Calibration issued for fixed Calibration equipment shows readings and traceability.
Packing List     Elcometer 2020 or Elcometer 2041 Fineness of Grind Gauge, scraper, plastic case and operating instructions 

Can be used in accordance with:
ASTM D 1210, AS/NZS 1580.204.1, DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5, NF T30-046

Gloss Meter (Elcometer 480)

Gloss Meter (Elcometer 480)
Gloss Meter (Elcometer 480)

The Elcometer 480 range are easy to use glossmeters which combine high accuracy, repeatability and reproducibility with functionality making them the most advanced glossmeters on the market today.

  • Small, robust & ergonomic
  • 3 - 10 readings per second
  • Repeatable, reproducible & accurate
  • Multiple angles; 20°, 60°, 85°
  • 40,000 reading memory in up to 2,500 batches
  • Date and time stamped readings
  • USB & Bluetooth® data output
  • PC, iPhone or Android™ compatible
  • Automatic gauge & tile diagnostics
  • Auto calibration tile recognition via RFID (Radio Frequency Identification; patent applied for)
  • 40 user definable limit standards
  • Standard, auto repeat and scan modes
  • Differential mode with pass/fail
  • Display readings, statistics, graphs & batch review

The Model Range
The Elcometer 480 is available as either a simple entry level 60° glossmeter or state of the art Single, Dual or Triple angle variants.
The Elcometer 480 is available with (Model T) or without (Model B) memory.
The Elcometer 480 Model B is a 60° unit, Model T gauges are available as single, dual or triple angle variants with %Reflectance and Haze.

Accuracy & Repeatability
Advanced electronics and a superior optical design combines highly accurate, repeatable and reproducible measurements with industry leading inter-instrument agreement - across its entire 0-2,000GU range.

Order Code
J480B-6     Elcometer 480 Model B 60° Glossmeter
J480T-6     Elcometer 480 Model T 60° Glossmeter
J480T-26     Elcometer 480 Model T 20/60° Glossmeter
J480T-268     Elcometer 480 Model T 20/60/85° Glossmeter


Arham Scientific Co.

Mr. Amit Bachhawat (Manager)
15/17, Ladwadi Building, Room No. 26, Kalbadevi Road, Old Hanuman Lane, Kalbadevi Road
Mumbai - 400002
Maharashtra, India
© Arham Scientific Co.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited