Moisture Meter

Gann Hydromette Compact
Electronic Moisture Meter for Wood and Plaster

The hand closes naturally around the ergonomic form of the housing so that the pins on the end of the instrument can be pressed into the material to be measured. The thin pins make it easy to measure the moisture content of sawn timber, chipboard and fibreboard materials up to a maximum thickness of 25 mm as well as normal gypsum or mixed plaster.

• Handy, quick pocket-sized moisture meter for speedy single or series measurements.
• Size: H200 mm x W35 mm x D35 mm. Weight approx. 130g.
• Two-group wood species correction.
• Measurement of plaster moisture content with a direct readout in percent of dry weight.
• Completely automatic instrument setting.
• No separate electrodes or leads required.
• Power supply by 9 V dry cell or rechargeable battery (optional accessory).

(including battery, spare pins and protective cap)

‘Lutron’ Make Imported Moisture Meter
Model : MS-7000  Measure Moisture content over range 9% to 30%. Microprocessor circuit assures maximum possible accuracy, provides special functions and features. Records Maximum and minimum reading with recall. Data hold function to freeze the desired value on display. Auto shut off saves battery life. Rs-232 PC serial interface.  Built in low battery indicator. Separate pin type moisture probe, easy operation and remote measurement.
Display  : 13mm (0.5”) LCD
Application  : For surveying building for dampness and for the rapid determination of Moisture content of wood/timber.
Memory :9 Material species groups in memory, calibrations for about 150 different Species of wood are provided.
Circuit  : Custom one chip of micro processor LSI Circuit.

Moisture Meter:-
An ISO 9001: 2000 Certified company ‘CES’ Indian make Digital Moisture meter Model 2072 CES. Suitable for Measuring Moisture of Various Food grains, Pulses, Oil seeds, Vegetable seeds and other general materials.

Technical Specification:-
Range              : 3.5 % - 40 %Accuracy        :± 0.2 %
Principle         :Resistance Measurement
Temperature :Automatic Sensor
Display           :Three Seven Segment FND
Size                 : 30 x 17 x 26 cm

Special Features:-
Direct Reading Display for all commodities
RS – 232 printer interface Port available for printing the data
Coding System for individual Commodity
Room Temperature Display
No arithmetic calculation required

Instrument is supplied complete with all standard accessories & Operation Manual.

Elcometer 7400 Compact “ B” is an electronic moisture indicator using a patented technique based on the dielectric constant/high frequency method.

It has a LCD display with universally applicable ball sensor for non-destructive location of moisture in all kinds of building materials and is also suitable for assessment of moisture distribution in walls, floors and ceilings.

• Handy rapid-action moisture indicator for fast response
• No separate measuring electrodes or cables required
• Ideal pre-tester for use with all moisture analysers using the carbide method
• Fully automatic adjustment of the indicator