We offer a range of Electrical Transformer to our clients at industry leading rates that are at par with interantional standards.
Isolation Transformers
We offer isolation transformer, which is used to de couple two circuits. These are used for power supplies for sensitive equipment like computers or laboratory instruments. We can also offer our clients with supply control transformer, step up and step down isolation transformer in odd range requirements.
Features:
Use of toroidal core and E.I. stamping lamination in C.R.G.O. materials.
Oil Cooled Type Capacity-Above 75.0 KVA
Availability of non standard ranges as per customer requirement.
Provides powder coated cabinet above 10.0 KVA capacity.
Technical Specifications.Single Phase:
Capacity: Up to 50.0 KVA
Input: 220 V/ 230 V /240 Volts AC, 50 Hz
Output: 0-9-12 v/ 0-15-18-25V/ 0-100 Volts AC
Three Phase:
Capacity: Up to 300.0 KVA
Input: 400V/420V/440V/460Volts AC, 50 Hz
Output: 200V/220V/240V/250Volts AC.
SPECIFICATION FOR STANDARD MODELS:
a) Single Phase: upto 50.0 KVA capacity INPUT = 220 V/ 230 V /240 Volts AC, 50 Hz OUTPUT= 0-9-12 v/ 0-15-18-25V/ 0-100 Volts AC b) Three Phase: up to300.0 KVA capacity INPUT= 400V/420V/440V/460Volts AC, 50 Hz OUTPUT=200V/220V/240V/250Volts AC
We can also supply air cooled and oil cooled both type We can use both type a) Toroidal Core b) E.I. stamping lamination in C.R.G.O. materials Above 75.0 KVA capacity - oil cooled type used M.S. Cabinet with powder coated cabinet supply and above 10.0 KVA capacity - custer base bottom provides Input Voltage: The voltage that should be applied to the input terminals to make the dial calibration correct is 240v, 50Hz, 415v, 50Hz No load current: Less than 2% of full load. Construction: Both single and hree phase units are supplied enclosed in sheet metal covers, unless asked for open type construction for panel mounting,oil cooled units are supplied in sheet-metal tanks with or without cooling radiators. Current Ratings: (single wound type) a) Single Phase: upto 50.0 KVA capacity INPUT = 220 V/ 230 V /240 Volts AC, 50 Hz OUTPUT= 0-9-12 v/ 0-15-18-25V/ 0-100 Volts AC b) Three Phase: up to300.0 KVA capacity INPUT= 400V/420V/440V/460Volts AC, 50 Hz OUTPUT=200V/220V/240V/250Volts AC
Ar Kay Electronic System has recently indented a huge consignment of CRGO & CRNGO Silicon Steel sheets and coils and are totally equipped with new dies and machinery to cut and supply lamination stampings and also torodial cores and mitred strips for transformers. All the stampings will be cut on pillar die sets to ensure zero burrs and the watt losses will be bare minimum and all the CRGO stampings will be Nitrogen Gas Annealed for stress relief. Ar Kay Electronic System ensures that the quality of the Lamination Stampings will be nearest to the GKW materials and there will be no chance of any sort of complaints in the materials.
Ar Kay Electronic System has drastically cut the rates due to direct import of raw materials and also due to higher production capacity and factory location being shifted outside octroi limits.
E & I Laminations - Strips - Cores
E/I Type standard laminations and J laminations (Type No. L-164, L-109, 1, 35, 17, 41, 043, 12A, 74, 23, 30, 31, 15, 33, 3, 16, 6, 43, 8, 8B.
The importance of continuously variable voltage in Electrical Engg. Works cannot be overemphasised, ARKAY 'VARISTAT' are made to make such continuously variable voltage most easily available.
The intrinsic quality control check-ups under the supervision of highly experienced engineers ensures the ruggedness and reliability of operation
SPECIAL FEATURES:
VARISTAT continuously variable Auto Transformers have many operating advantages and conveniences over other manually operated voltage control devices for alternating current use
1) Smooth Control: The VARISTAT can be set to any output voltage within its range. Output voltage is continuously adjustable from zero to maximum.
2) Small Size: The variable Auto Transformers is much smaller than any other type of control of equal rating.
3) Better Efficiency: Very low losses under all loud conditions. Toroidal VARISTAT have low-loss grain oriented strip wound cores.
4) Better Regulation: Output voltage is substantially independent of loud.
5) Linear Output Volts: Output Voltage varies linearly with angle of rotation of control knob.
6) Temperature rise: Less than 50 deg.C for continuous duty.
7) Advanced Design: Excellent electrical specification is matched by rugged, compact construction. Brush replacement is simple and convenient.Two,Three or more units can be ganged on one shaft for series,parallel or three-phase operation.
8) Long Life: When used correctly the VARISTAT has a very long operating life.The life of a VARISTAT is essentially the same as that of any standard fixed ratio power transformer.
Indian Standards: All VARISTAT unit conform to I.S.S. 5142-1969 Easily Read Dials: Dials are single - reading with large, clear numerals, easy to read at a distance.
Wide range of models: VARISTAT are available in a wide range of models to suit various requirements.
These include:
Open - for panel mounting purpose
Enclosed - Suitable for table mounting
Portable - with or without meters
Oil Cooled - for increased ratings
Double Wound - Where the primary is isolated from the secondary prominant for manufacturer of servo-control voltage stabilizer
High Frequency - for various louds
Special Voltage - 120v, 240v, 400v,etc.
VARISTAT APPLICATION:-
Supply Voltage Correction, Boosting of low lines and line voltage stabilisation, either manually or automatically in automatic voltage stabilizers
Control of D.C. voltage and current through rectifiers. Control of rectifiers in electroplating, battery chargers etc.
Motor speed control in textile machines, blow moulding machines, injection moulding machines,printing and packaging machineries etc.
Testing and calibration of voltmeters, ammeters, wattmeters, power-factor meters etc.
Voltage and current control in development and experimental works
Heating control of ovens,furnaces, infra-red heaters etc. in production and experimental works
Lighting control in theaters, auditorium, hotels, restaurant, photographic studios and dark-rooms, reading houses,etc.
GSM Technology Manufacturer and supplier of transformer, torridal transformer, drumcore transformer and industrial transformers. Along with toroidal bases, bobbin box and pin type bobbin.
MARKAD TRANSFORMER & ELECTRIC CO. Supplier and manufacturer of transformers that includes power transformers, HT transformers, LT transformers, isolation transformers, furnace transformers, distribution transformers and welding transformers. Also offers electrical contracting.
Satya Edu Tronics Manufacturing and supplying transformer which includes electric transformers, single phase transformers, three face transformers, voltage transformers,digital meters,power transformers,load trolleys
Processing...
