We manufacture and offer pressure line hydraulic filters that have the following main characteristics:

Disposal Elements Based On Inorganic Fibre:

• Pleated elements.
• Flow direction from out to in.
• Superb adsorption of finest particles over a wide differential pressure range.
• High contamination retention capacity due to large specific absorption area.
• High chemical resistance due to use of epoxy resin for impregnation and bonding.
• Element protection due to high burst pressure resistance during coldstart and differential pressure.
• Water or water traces in the hydraulic fluid do not reduce filtration effect.
• Filtration 3,5,10 & 20 micron absolute.

Wire Mesh Elements:

• High temperature range.
• Corrosion protection due to stainless steel filter material and zinc plated steel parts.
• Cleanable
• High different pressure.
• Filtration 25 micron nominal. Fine filtration can be available on demand.

The return line hydraulic filters being manufactured and supplied by us have the following main characteristics:

Disposal Elements Based On Inorganic Fibre:

• Fitted with by-pass valve.
• Pleated element.
• Flow direction from out to in.
• Superb adsorption of finest particles over a wide differential pressure range.
• Exemplary Beta stability over a wide differential pressure range.
• High Contamination retention capacity due to large specific adsorption area.
• High chemical resistance due to the use of epoxy resins for impregnation and bonding.
• Element protection due to high burst pressure resistance during Cold start and differential pressure.
• Water or water traces in the hydraulic fluid do not reduce filtration effect.
• Filtration 3,5,10 & 20 micron absolute.

Wire Mesh Elements:

• High temperature range.
• Corrosion protection due to stainless steel filter material and zinc plated steel parts.
• Cleanable
• High different pressure.
• Filtration 25 micron nominal. Fine filtration can be available on demand.

We manufacture and offer filters for E.D.M (Electrical Discharge Machinery) or wire cut. The features of these filters include:

• Rugged, fully supported element construction for out-to-in flow, gives high collapse strength and filtration integrity.
• Filtration media is a unique 'composite' structure with a fixed graded pore construction of inert, impregnated and bonded with specifically formulated resins for long service life.
• Good precipitation and high dirt holing capacity, provides a pure water/oil supply to vessels.
• Depending upon the user's requirements special built version cab be manufactured.
• ARKe Filters provide substitute to filter elements for all makes of internationally renowned E.D.M./Wire Cut Machine.

We design and manufacture filters for generator sets that have high dirt holding capacity. The features of these filters include:

• Filtration media is a unique 'composite' structure with a special graded pore construction of inert, impregnated and bonded with specially formulated resin for long service life.
• Filtration media are so perfectly pasted that it does not cause any leakage of unfiltered air and oil to engine.
• Low maintenance and high reliability in operation.
• Offer a wide range of Generating set-oriented & purpose-built version of filtration elements.
• ARKe Filers provide substitute to filter elements for all make of Indian and Internationally renowned Diesel Generating sets.

Avail from us, our wide range of screw compressor filters that are manufactured using superior filtration materials. These filters have the following features:

• Fine oil precipitators for screw compressors, retain lubricating oil in the compressed air and return it to the lubrication circuit, thus ensuring high performance and economical operation.
• Spiral wrap of outer mesh provides uniform diffused flow throughout the length of the element for optimum filtration.
• Outer mesh material is gauged to provide proper strength and cadmium-coated for corrosion resistance.
• High quality materials and manufacturing quality, optimally adopted to the respective utilization, ensure long life and high performance.
• Depending upon the user's requirements, special purpose-built version can be manufactured.

Avail from us, the tank top filters that are known for their high filtration ability. These filters include: tank top mounted return line filters and tank bottom mounted suction filter. Designed to be mounted directly on the tank top and bottom, these products have durable construction.

The specifications include:

• Flow range : Upto 330 L/Min
• Pressure: Upto 10 bar
• Material: Aluminum, MS casting
• Micron: Return line 10 and 20 µ
Suction line 80 to 140 µ

We manufacture and offer air filters which are generally used For ventilation & suction. The features include:

• Pre -Filter
Efficiency: 90% down to 5-25
Initial pressure drop: 2.5mm WG
Media: Synthetic non woven washable with water, soap or solvent

• Fine Filter
Efficiency: 99.9% down to 1 to 5
Initial pressure drop: 6.5mm WG
Media: Synthetic drop non woven (washable)
Efficiency: Dust holding upto 99%

These bag filters are manufactured using high grade raw materials. Used for varied applications like water, oil and air, the different features of these bag filter:

• Temperature: Available for 50° to 150° C
• Media: Nomex, Nordic, Polyester non woven
• Micron: 1 µ to 150 µ
• Capacity: High dirt holding capacity

Our range of duplex filters are used wherever continuous operation is required and flow not to be interrupted. These products consist of two filtration chambers each rated for 100% capacity. Redirection of fluid flow without interruption of flow. These duplex filters are attached with easy to remove basket for cleaning.

We manufacture and offer spin on filters that are low pressure return line and suction filters. Easy to change by unscrewing the filter, the contaminant remains in the filter and is discarded when the filter is changed. We have pleated type filters to provide the largest possible filtration area.

We manufacture and offer suction strainers that are high in quality and are widely appreciated for the following salient features:

These elements protect pumps of invaluable systems/ machine. Pumps incorporated in Hydraulic systems must be protected from coarse contaminants which if not removed by any filtering device may gain access to the tank. For protection our suction filters offered under the brand aRKe, have proved their compatibility to the protection of pumps & plants.

The filter surface area is dimensioned to ensure longer life at the proper corresponding flow rate.

Elements can be re-used after manual cleaning with brush and cleaning agent. Was filter with cleaning liquid from the inside to the outside to remove coarse external contaminants in a a seperate cleaning tank.

Specifications :

Filtration Range	Standard filters are 149 microns
	But in fine range available up to 25 microns.
Working Temp. Range	-20 to 100o°C.
Flow Capacity	15 to 600 lit/min.
Inner tube material	A.B.S.
Wire mesh material	Stainless steel 304,316

The hydraulic filters that we manufacture have rugged construction and high reliability in operation. The various salient features of these filters include:

• Exemplary beta stability over a wide differential pressure range( superb absorption of finest particles over a wide differential pressure)
• High collapse strength and filtration integrity
• High contamination retention capacity due to large specific absorption area.
• High temperature & chemical resistance due to the use of epoxy resin for impregnation and bonding
• Comprehensive range of filter elements with wide range of micron ratings to suit most of the application areas
• Long service life and economical