Artech Instruments & Controls Private Limited

The Portable Foundry Pyrometer, Model AFP-100 is a handheld unit suitable for measuring the temperature of molten metal in small casting factories and foundries. This Pyrometer belongs to the family of Artech Molten Metal Temperature Measuring Systems which are in use since 1987. The AFP-100 is a handheld battery operated instrument and is used with an 8 ft. lance which is fixed to the instrument.

ARTECH manufactures the most versatile Molten Metal Temperature measuring systems since1987. In use extensively in India and also exported.

The Molten Metal Pyrometer Model MFP-200 is a compact unit suitable for measuring the temperature of molten metal in small castings factories and foundries. This simplified unit belongs to the family of Artech Molten Metal Temperature Measuring Systems which are in use since 1987. The MFP-200 is a wall mounting, mains operated instrument and is used with a 8 ft lance which is connected to the instrument by means of a cable of suitable length.

The Artech Humidity Indicator MODEL HIP-02 is convenient, reliable and easy to use. It gives a direct reading of relative humidity. It can be used wherever atmospheric humidity needs to be measured.

The Artech Humidity Indicator Model 200 RH directly indicates Relative Humidity. The Fully solid state circuit with no plug-in-cards enables the instrument to withstand severe vibrations and shocks.

The Artech Humidity Transmitter Model RX-01 is a compact two-wire transmitter with its capacitive sensor and electronic circuitry housed in a protective enclosure. The normal configuration is for wall mounting; a duct mounting configuration can be supplied on request. The transmitter is loop powered and controls the loop current at 4-20 mA according to the calibrated range. Model RTX-01 is a combined Humidity & Temperature sensor which has in addition to the above an RTD sensor for temperature sensing, with an additional twowire output loop.

The Remote Display Unit is a useful accessory which provides an easy to read numeric display of temperature recorded. The display numerals consists of LEDs assembled in an array to form 6 inch high characters. When a reading is taken, this unit receives serially pulsed data on a simple two wire connection. The Temperature is clearly displayed and if the unit is mounted at a suitable height, the reading can be visible to all on the shop floor.

This portable indicator is a convenient and handy instrument for field applications where a quick, easy and accurate measurement of oxygen is required. The sensor being located within the instrument requires the gas sample to be delivered to the inlet port. This instrument is ideal where the sample is available at a slight positive pressure. Alternately, a sampling pump can be provided.

The Artech DPA10 is used for continuous measurement of the Dew Point of air and gases in Gas Plants, Annealing Furnaces, Compressed Gases, Medical Gases, Natural Gas, Drying Systems and Power Generation. The instrument is provided with a by-pass valve to isolate the sensor when not in use, thereby ensuring fast response on re-startup. With the flow indicator the user knows when the sample gas is flowing The regulator controls the pressure, thus preventing damage of the sensor path by excess/fluctuating pressure..

The lamps indicate "ready", "Measurement in progess" and "measurement over" , using the relay outputs of the model aup-500. These indications are of great help to the operator, as they indicate whether the thermocouple is properly inserted into the lance before taking a reading and also whether the reading was completed without thermocouple burn out; in case the thermocouple becomes open before the sampling process is complete "measurement over" will not be indicated.

Molten Metal Temperature Measuring Systems- Universal Pyrometer, Model:AUP-500L, Remote Display 6, Model:ARD-02 Status Indicating Lamps with Hooter, Model ASI-02 Calibrators for mV & mA, Model: ALC-05 & also the complete range of Temperature Indicators / Controllers, Scanners, Oxygen / Gas Analysers, Humidity Instruments, Transmitters / Sensors, cables and other accessories

The ARTECH FEM-01 Fuel Efficiency Monitor is designed to monitor performance of boilers, heaters, furnaces, etc. It measures Oxygen, Carbon Monoxide and Temperature of flue gas. From these values it computes Combustion Efficiency, Excess Air and Carbon Dioxide values.