Backed by adeptness of diligent team, we offer a wide range of Compressed Asbestos Fiber (CAF) jointing sheets. The collection is fabricated of high grade of material including CAF. These are fabricated from carefully selected chrysotile fiber intimately blended with suitable heat resistant blinders and are vulcanized into homogeneous compositions and uniform thickness. These are superior in quality, and are effective for the process of sealing, jointing ad packing in various industries. Additionally, these are used for water, steam, gases, chemicals, petrol, oil acids, alkali's, solvents, and refrigeration plants in low and high pressure and temperatures. The range is widely appreciated for resistance to aggressive chemical environment and performance.

Features:

• Quality
• Heat resistant
• Uniform thickness
• High grade raw material
• Performance

Asbestos Friction Sheet Brake Lining is a flexible, solid woven asbestos based friction material reinforced with brass wire for better strength and impregnated with resign. Due to its flexible nature, it can be cut Into segments, cones and special shapes to enable the material in fitting to various forms.It may be heated uniformly at a moderate temperature to soften the impregnates to make the forming more easier. It should be used strictly under dry condition.

APPLICATION:

Brake Lining is suitable for various break and clutch components and are used in cranes, lifts, winches, winding machines, hauliers, road rollers, sugar mill centrifuges, concrete mixers, excavators etc.

TECHNICAL DATA

 

Cross Breaking Strength	2.52 X 10^5
Hardness
Rockwell	44-45
Shore	75-78
Heat Swell	0.34
Water Swell	0.26
Acetone Extract	6.99
Loss of weight on ignition	44.27
Specific Gravity	1.4930

Co-efficient of Friction depends on the severity of application and maximum operating temperature.

Operating Temperature :

maximum temperature	260C Max.
maximum continuous temperature.	125

Ranges :

Length	15 m,
Thickness	4.8mm (3/16”) to 19.1 mm (3/4”)
Width	25.4mm (1”) to 304.8mm (12”).

We offer asbestos millboard that is fabricated from selected clean, long asbestos fibers of uniform quality assorted with suitable incombustible binding materials. These are available in standard size of 1m x 1m sheet in thickness 1 5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 10 mm and 12 mm. These millboards are known for its features such as heat and fire resistance and strength. Our millboards are perfect at temperatures up to 500°C (932" F) and even higher temperature when properly supported. Additionally, it can be used acceptably at extreme temperature up to approximately 1400 C. These are also known for its features such as withstanding vibratory and impact loads easily.

Available is soft, medium and hard grades, these sheets can be cut, drilled and screwed to supporting beams, and can be molded or cemented to any shape. The medium grade is supplied only if it is specially asked by our clients. The hard grade is stiff and brittle and is used where rigidity is needed.

Features:

• High temperature tolerance
• Strength
• Can easily withstand vibratory and impact load
• Available in various grades
• Acid, sound and vermin-proof
• Strong and flexible

Picking method:

• Asbestos millboard is packed into wooden crates of approx 100 to 105 kilogram
• Number of sheets in one crate varies according to board thickness

Applications:

The Millboard asbestos offered by us find wide application in boiler and furnaces, catering equipment and steel, ferrous, non-ferrous plants. Various uses are stated below:

Boilers and Furnaces:

• Bedding layers on floor tiles in boiler house.
• Refractory underlining
• Damper control heat insulators
• Boiler door linings
• Gaskets for burners and ducting

Catering Equipment:

• Heating appliances such as Domestic, Cookers, and Grills
• Flue gas and burner seals
• Combustion chamber linings
• Heat shield panels

Steel, Ferrous and Non-Ferrous Plants:

• Steel and Aluminium making processes
• Centrifugal casting seals
• Induction furnace coil protection
• Splash guards

We are one of the leading dealers and suppliers of safety products made up of quality asbestos. Our range of safety equipment includes asbestos hand gloves, apron, leg guard – shoes, coat (boiler suit), safety helmet, and Kevlar hand gloves. Safety Helmet is used by Labors or Engineers during construction so that they are prevented from any risk of being hurt while working. We also offer safety goggles, safety ear plug, these are essential for individual at different times.

Features:

• Made from quality asbestos
• High flexibility
• High temperature tolerance
• Resistant to chemicals
• Application specific construction
• Available in different shapes and sizes

We offer wide range of PTFE Teflon products which are known for providing complete protection against the aggressive chemicals and atmospheric acids. Additionally they are demanded in the market due to its durability. The PTFE has the property for maintaining the honesty without decomposing to complex forms unlike plastics. Our range of Teflon product includes PTFF Teflon tape, sheet, bush, rod, ring, tubing, sleeves, universal rope, envelope gasket, solid ring gasket, Teflon balls (spherical), and 100% self adhesive joint gasket (expanded sealing cord). The Teflon products are fabricated with close tolerance with necessary specifications.

Features:

• High temperature resistance
• Low temperature: soft even at - 100°C
• Resistance to aqua regia and all organic solvents
• Weather resistance
• Smallest coefficient of friction in plastic
• In-adhesion
• Smallest surface tension in solid materials
• Nontoxic With physiologically inert
• Excellent behavior of electricity

We offer a wide range of non asbestos product such as solid braided rope, loose braided rope, glass fiber solid rope and twisted yarn. All these products are known for its quality and are procured from reliable vendors. Available in various shapes and size, these products find wide application in steam lines, motor leads hoses, industrial power houses, and are ideal packing for pumps.

Application and uses of our various non asbestos products offered by us, is as follows:

GFR-1:

This is the solid braided rope which is offered in square and round shapes. These are normally used to shield and protect hydraulic lines, steam lines; motor leads hoses, pipes and machinery from extreme radiant heat. Additionally, it can be reinforced with 'SS' wire inside the core or on the braiding.

Specifications:

• Sizes: 6mm, 8mm, 10mm, 12.5mm, 16mm, 20mm, 25mm, 38mm, 51mm, 63mm diameter and  square section
• Packing: 2.5 kg coils for sizes up to 12.5mm, 5 kg coils for sizes between 1.2.5mm and 38mm, 10 kg coils for sizes above 38mm

GFR-2:

This is the loose braided rope (or the lagging rope) and is generally used for the insulation of industrial power houses, marine steam, hot water pipelines and exhaust pipelines.

Specifications:

• Sizes: 10mm, 12.5mm, 15mm, 20mm, 25mm.and 30mm diameter
• Packing: 2.5 kg coils for sizes up to 12.5mm, 5 kg coils for sizes above 12.5mm

Asbestos Fibre Glass Cloth

Asbestos Fibre Glass Cloth is used for the thermal and corrosion protection of tube, flanges, steam lines, valves, weld joints etc. Glass fibre cloth can be reinforced with SS Wire.

• Standard Width : 1 m
• Standard Thickness: 1.5mm, 2 mm, 3 mm, 5 mm.
• Packing: 15 metres rolls for thickness upto 3mm, 0 metre roll for thickness above 3 mm.

We offer a wide range of asbestos packing product for textiles that is known for its features such as strength, absorbent, light, free of odor and chemically inert. Additionally these are also known for its greater flexibility and temperature resistance. We procure all our asbestos packing products from reliable and trustworthy vendors. These are provided to our clients as per their requirements.

We offer following types of asbestos packing products for textiles:

•  Asbestos White Yarn
•  Asbestos Graphite Yarn (Valve Twisted)
•  Asbestos White Dry Rope
•  Asbestos White Cloth 
•  Asbestos Woven Tape
•  Asbestos Fibre Filled Lagging Rope (Soft)
•  Lubricated and Graphite Asbestos Gland Packing Rope.
•  Cotton Graphite Packing
•  Jute Grease Yellow Packing
•  Teflon impregnated Asbestos Packing Rope
•  Asbestos Mill Board Sheet
•  Listing Tape 
•  Asbestos Graphite Packing with wire Led,
   Brass wire, S.S. Wire (Belka Packing). 
•  Asbestos Rubberised Tape
•  Boiler Gasket Ring
•  Tapper and Klinger Sleeves

It brings you international quality and technology of purest so also safest and best asbestos packing, sealing and textile products. It meets the demand of entire range required for steel, Aluminium, Power, Fertiliser, Refinery, Glass, Chemicals, Sugar mill, Cement plant, railway, marine Ordnance Factory etc. Presently hi-tech packing are in vogue to meet the development in all area of the industries. to meet the demand we have imported "Aqua Dispersion Process " technology from world renowned British belting & asbestos group of England. Asbestos products manufactured in "Aqua Dispersion Process" is not only the purest but also Non-health Hazardous. Moreover "Aqua Dispersion Process" also Makes the products technically superior providing the lowest "Loss On Ignition" the most important factor in Asbestos products for best possible performance and Longer Life. Asbestos products are manufactured as per the latest IS Specification and are of Gr.AAA/AAAA. 

We offer variety of asbestos packing products including the following:

• Asbestos Webbing Tapes
• Asbestos Cloth
• Asbestos Dry Packing(Round and Square)
• Asbestos Logging Rope

Webbing Tapes:

The webbing tapes we offer are made of Yarn in various shapes and sizes. These are known for their features such as fireproof, flexible, and woven from 100% pure asbestos that will not loosen in service. It is due to its excellent electrical and heat insulating properties, and high tensile strength they are used for insulating wires, coils, cables and other electrical conductors.

With the capability to be used for insulating small steam pipes and bends, these are used as following:

Flexible gasket material and to form flexible connecting couplings where high temperature service is involved Wicking in oil-burning apparatus

Features:

• Durable
• Economical
• High in water repellent
• Low in water absorption
• Resistant to flame, heat, oil, fungus and mold
• Non-corrosive to cables
• Non-sagging
• Abrasive resistant

Further, the edges of the tape are salvaged so that the threads cannot pullout. They are useful and it so can easily be carried anyplace at anytime and used right on the spot of work.

Ceramic Fibre Based Insulation Packing are made from Ceramic Fibre, completely Non-Asbestos in nature and are reinforced with E-GLASS FIBER, STAINLESS STEEL (S.S.) or INCONNEL WIRE for high strength retention at elevated temperatures. Ceramic Packing and Textiles can be widely used under different temperature conditions, to a maximum of 1260°C *. Ceramic yarn and its woven products have proved to be efficient and economical in high temperature thermal insulation application in different industries including Petrochemicals, Glass, Steel, Metals, Chemical Plants, Ship Building, Nuclear Power Plant, Extremely High Temperature working in lining industrial furnaces, process heaters, etc. 
These are high performance Insulation Packing having a long endurance life with high performance.

Ceramic products available are:-

• Ceramic Fiber Based Insulation Packings
• Woven Cloth/Tapes/Strips
• Braided(Square/Round) / Twisted Ropes
• Lagging Ropes
• Blankets

Technical Specifications:

• Loss Of Ignition - 17-19%
• Max Temperature - 1260°C
• Working Temperature - 1000°C