The roll filters are made by using synthetic fibers except the natural fiber R20. The exclusive bonding technology used in the manufacturing ensures a high number of fibers per square meter for a given weight. All the R series provided to clients is in white color therefor no color pigments are used to make a distinction between various filters. These R series include various models such as R 15, R 29 and R 50 which have got a relatively low resistance to air flow but a high dust holding capacity.

Applications:

• The R 15 filters are economic and R17 filters are durable and both of them are recommended for use in low pressure forced air convector, window ventilation units, fan coils and as pre filters in paint spray cabins.
• R 29 are used in room air conditioning units, hot air generators, air conditioning installations, home kitchen hoods and as pre filters in paint spray cabins.
• R 50 super filters is suitable to be used in air conditioning, installations in food industry, industrial ventilation systems and as pre-filters in paint spray cabins.

The pre filters are made by totally unitized double wall, die-cut box, moisture resistant beverage board frame. The filter is bonded inside the frame at all points of contact which provides a sturdy and reliable construction that does not rack or deteriorate under difficult operating conditions. The pack of the filter support retainers, which are an integral part of the frame at both the air entering and leaving sides. This increases the rigidity of the filter and helps in maintaining equal spacing between pleats for maximum dust holding capacity with minimizing resistance.

These filters are ideal to be used as pre filters when combined with high efficiency filters. This not only extend the life of higher efficiency filters from pre mature dust loading and replacement but provides them with more efficiency.

Secondary filters/fine filters are installed when the space for installation is limited. These low depth and light weight filters are available EN 779 classification which ranges F6, F7 and F8. These display low resistance which means low energy consumption.

Due to their light weight and low depth, these prove to be very economic to ship and store in comparison to other bulk filters. These are suitable to be used in various air volume systems and can withstand repeated fan shut down and turbulent air flow. These show a high resistance towards intermittent exposure to water providing high relative humidity resistance. These products are also available in bio static treated media.

Final filters/HEPA filters are one piece gasket dry seal filters which are used in clean-rooms, clean-benches, bio hazard benches and other clean work stations. These are available in a wide range of H 16, U 15, U 16, and U 17 in accordance with EN 1822. These filters ensure the necessary levels of contamination control in clean room environment.

These filters are compact, light weight and easy to install in open plenum, terminal and in line housing systems and offer various other benefits as well.

Features:

• These are factory tested to meet the most stringent legal and industry requirements.
• They have got high efficiency which safeguard processes, products and workers.
• They have got functional reliability as they are leak and scan tested.

The gas phase filter are made on the safest technology and provides an efficient result to clients. These are universally recommended for the removal of large spectrum of contaminant gases such as toxic, corrosive and odorous gases found in industrial and commercial applications. The removal of undesirable odors often permits larger percentage of the air in a building, reducing energy costs for heating and recirculating. These provide air purification for four types of airborne contaminants such as microbial, radioactive, air borne bio hazards and gaseous contains.

We have been involved in air filtration for automotive paint shops since the company's inception. Today's consumers expect a long-lasting finish quality on the vehicles they purchase. Additionally repair shops must be able to match the results produced by automotive manufacturers to satisfy consumer demands. Thus near clean-room conditions are required and our experience, technical expertise and extensive product line have positioned us as a single-source for paint shop air filtration at any level of cleanliness required.

Air pollution control products and systems are based on advanced technology and are used to control air pollution in the world. We provide the best air pollution control products and systems which are energy efficient packaged units to solve dist control problems in plants. They also provide large, complete, custom engineered systems for major pollution control projects. These products are supplied to clients on the most competitive prices in the market.

The commercial/home air purifier made by the company is available in two models: pure air 200 and pure air 400. Our series is designed for health care facilities in order to create air borne infection isolation rooms. Our systems meet all the engineering control sections from the CDC TB guidelines (1994) and from OSHA's TB Enforcement Policy (1996).

PurAir 200 and PurAir 400 have the capabilities of removing all the containment at microscopic level in order to maintain the highest level of air cleanliness. These are also capable of removing harmful chemicals and odours that can cause an adverse effects on human body.

The industrial air cleaner is designed for health care centres and can be used to create negative pressure environments or to recirculate/dilute room air. There are three models in this unit one is a freestanding/portable unit and other two are ceiling/duct mounted models which provide an air flow from 325 to 700 CFM. All these units come with specially designed gel seal HEPA filters, intercept treated pre filters locking control and filter compartments. We assure our clients to provide them with the best air cleaners in this range and that too at reasonable prices.

For more than 60 years, we have been providing air intake filters and systems to prevent fouling, erosion and corrosion of internal machinery components. We are unmatched in our ability to engineer and manufacture total air filtration and acoustic systems to any specification. From harsh deserts, to inner cities, to the most remote arctic regions, we have extensive experience in the design and application of air filtration and noise control systems for all environments. Our system capabilities and products for high-performance rotating machinery include: inlet filtration, silencers, acoustical enclosures, evaporative cooling systems, anti-icing systems and structural design to accommodate any limitations in physical layout.