With the necessary infrastructural requisites and the support of expert professionals, we are capacitated to manufacture a wide variety of pumps. These pumps are fabricated as per the set industrial recommendations and therefore we offer our range to the maximum satisfaction of our clients. We are also able to offer tailor made solutions in accordance to the industrial requirements. Following are some of the varieties in our diversified assortment of pumps:
Bore Well Pump Motors
Our superior quality Submersible (Bore Well) Pump Motors - V 4 is fabricated with the usage of stainless steel and other high grade engineering plastic components which makes them anti-corrosive and anti-abrasive. Thus, we avail our range with greater operational efficiency and longer functional life. These are simple construction coupled with precise parts ensures better and longer functionality.
Following are the special attributes of our Submersible (Bore Well) Pumps - V 4:
• Water lubricated wet type motor • Water cooled • Easily dismantled & repaired. • Can handle up thrust loads • Designed for withstanding wide voltage fluctuations.
The application areas of our Submersible (Bore Well) Pumps - V 4 includes:
• General purposes like domestic & community water supply, buildings, housing complexes and others • Irrigation purposes like drip, sprinkler & open irrigation, gardening, seed farms, nurseries and others • Industrial purposes where small water discharge is required at high pressure like dairy industries or low pressure high discharge in industries, air conditioning installations, mining industries and many others.
Technical Specifications are as follows :
SPECIFICATIONS
Nominal Diameter
96 mm. (4")
Power Range
0.37 kw to 1.5 kw, Single phase
0.75 kw to 3.7 kw, Three phase
Speed
2800 RPM
Flow Rate (LPS)
0.25 - 4.5
Total Head Range
250 mtrs.
Nominal Outlet sizes
25 mm. (1"), 32 mm. (1.25"), 40 mm.(1.5"), and 50 mm. (2").
We fabricate an extensive array of pump motors which also includes domestic centrifugal pumps. These are manufactured with high grade materials and in accordance to the recommended industrial standards. These are availed with superior mechanical shaft seal that ensures enhanced functionality and effective sealing against water leakage. Moreover, the entire rotating components are dynamically balanced with its uni-casting volute chamber designed to give higher hydraulic efficiency.
Following are some of the specifications of our centrifugal pumps:
• Resistant to wide voltage fluctuations & high temperature rise • Air locking is prevented by center delivery casing • Good suction lift features &.greater water discharge rate & low power consumption • Pumpset employs at 200 / 240 Volts, 50Hz. capacitor start & run, 2850 RPM & totally enclosed fan cooled motor • Anti-friction ball bearings that are grease lubricated are fitted at both ends to withstand radial & axial loads • Single phase motor without centrifugal switch facilitates easy maintenance.
Some of the application areas of our Centrifugal Pumps are:
• Irrigation • Agriculture • Farms • Gardens Application areas include irrigation, agriculture, farms, gardens, industries & various other civil applications.
Technical Specifications are as follows:
ECIFICATIONS
Power Range
0.37 kw to 1.5 kw , Single phase, 2pole
0.37 kw to 1.5 kw , Three phase, 2 pole
Speed
2850 / 2880 RPM
Version
A.C.50 Hz., Single phase 200-240 V Permanent Split Capacitor (CSR)
A.C. 50 Hz., Three phase 380- 415 V Direct On Line (DOL)
Our specialized range of Deep Well Pump Motors- Model V 6 has widespread application in irrigation and other purposes. These deep well pumps are precision engineered with the utilization of CNC machine which assures that only flawless pumps are manufactured. Our pumps do not possess suction and priming problems and does not require pump house.
Some of the salient features of our Deep Well Pumps- Model V 6:
• Noise-free operation • High functional efficiency • Highly durable water cooled rewindable motor • Can be easily dismantled & repaired • Specifically designed for wide voltage fluctuations.
Following are some of the application areas of our Deep Well Pumps- Model V 6:
• Rip & sprinkler irrigation • Agriculture • Public water supply • Industrial and rural water supply • Varied fields related to water supply.
ECIFICATIONS
Nominal Diameter
150 mm. (6")
Power Range
2.2 kw to 26 kw. Three phase
Speed
2850 RPM
Flow Rate
0.75 - 21 LPS
Total Head Range
9 - 250 mtrs.
Nominal Outlet sizes
50 mm. (2") and 65 mm. (2.5")
Operating Range
50 Hz., 380 - 415 V, A.C Three phase
Maximum Outer Diameter
143 mm.
Type of Duty
S1 (continuous)
Maximum Starts per Hour
6 times
Method of Starting
2.2 kw to 5.5 kw Direct On line (DOL), 5.5 kw to 26 kw Star Delta (SD)
We fabricate and export an extensive range of Jet Pump Motors with the application of high end CNC machines making them functional even during power fluctuations and low voltage. We have offered them with dynamically balanced rotating parts, impellers and high quality single shaft for motor and pump. We can also customize them as per the citations of our clients.
Cited below are some of the salient features of our jet pump set:
• Good suction lift • Compact design • Resistant to wide voltage fluctuations • Servicing can be done with ease at minimal cost as the motor & pump are accessible at the surface. Some of the application areas of our jet pumps are:
• Small farms • Gardens • Hotels • Residents • Small industries • Various fields related to water supply.
Technical Specifications are as follows :
PECIFICATIONS
Power Range
0.37 kw to 1.5 kw Single phase, 2 pole
0.37 kw to 1.5 kw Three phase , 2 pole
Speed
2850 / 2820 / 2800 RPM
Maximum Suction Lift
64 mtrs.
Discharge
400 LPH
Delivery Head Range
16 mtrs.
Version
A.C. 50 Hz., Single phase 200 - 240 V,
Permanent Split Capacitor (CSR) and A.C., 50 Hz.,
Three phase 380 - 415 V, Direct On Line (DOL)
Class of Insulation
A / B / E
Type of Duty
S1 (continuous)
Sealing
Mechanical Seal (Carbon and Ceramic)
Nominal Pump sizes (Suction x Pressure x Delivery sizes in mm )
We fabricate and export a wide assortment of quality based Open Well Submersible Pump Motors. We have technocrats who design and fabricate our highly efficient and reliable Openwell Submersible Pumps. We have developed our array in a manner which allows it to be easily dismantled and repaired.
Salient features of our Openwell Submersible Pumps are as follows:
• No suction & priming problems • No requirement for pump house • Noiseless operation • Highly durable water cooled rewindable motor • Designed for wide voltage fluctuations.
Our open well submersible pumps are widely used for areas related to water supply such as:
• Irrigation • Drip and sprinkler irrigation • Agriculture • Public water supply • Industrial and rural water supply.
Technical Specifications are as follows :
SPECIFICATIONS
Power Range
0.37 kw to 1.5 kw, Single phase
0.75 kw to 22 kw, Three phase
Speed
2880 / 2850 RPM
Flow Rate
0.2 to 65 LPS
Total Head Range
6 to 115 mtrs
Nominal Outlet sizes
50 mm. (2"), 65 mm. (2.5"), and 80 mm. (3")
Type of Duty
S1 (continuous)
Operating Range
50 Hz., 380 / 415 Volts A.C., Three phase
Maximum Starts per Hour
6 times
Method of Starting
0.75 to 5.5 kw, Direct On Line (DOL), Three phase,
5.5. kw to 18.75 kw, Star Delta (SD) Three phase
Cable Connection
Permanently connected and sealed PVC insulated 3 core flat cable.
Leveraging on our infrastructural facilities, we are enabled to offer a superior array of Self Priming Pump Motors which are reckoned for their hassle-free operations. The motor used in our self priming pumps is manufactured as per IS: 996 which facilitate high starting torque. Our high end self priming pump does away with the use of foot valve and have high and rapid suction properties. We avail our self priming pumps with C.I motor frame, gun metal and brass impeller and stainless steel shaft that makes our range anti-corrosive.
Cited below are some of the salient features of our Self Priming Pumps:
Designed for wide voltage fluctuations
Vibration free smooth operation
Perfect head and discharge
Sturdy & compact design
Closed grain graded cast iron parts
Single & three phase options
High head due to regenerative action
Permanent split capacitor for single phase motor where centrifugal switch is not required
Superior water seal.
Following are some of the application areas of our Self Priming Pumps:
Minerva Motors, Mumbai Supplying and manufacturing pump spares such as automobile pumps, engine pump, designer pump spares, water pumps, grease pump spares, commercial pump, industrial pumps and precision water pumps.
Ash Bond Engineers Private Limited Supplier of pumping equipment which includes piston pumps, metal pumps, axial pumps, radial piston pumps, hydraulic hand pumps, displacement pumps, oil pumps and axial piston pumps.
New Pooja Power Electricals Exporter and manufacturer of pump set, agriculture pump set, irrigation water pumping set, precision engineered pump set, heavy dut pump set and industrial heavy duty water pumping set.
Processing...
