We are manufacturing and offering a wide range of agriculture centrifugal monoblock pumps that are made of high quality material and with the aid of modern machines like CNC machines. We use better insulating materials to withstand high temperature rise. Some of its essential features are :

• Specifically designed to allow greater water discharge rate & lower power consumption.
• Capacity to resist wide voltage fluctuations.
• Windings with synthetic varnish ensures better moisture resistance.
• Rotating components like rotor & impeller are dynamically balanced that facilitates long bearing life & vibration free smooth operation.

Application areas include agriculture, drip and sprinkler irrigation, civil applications, water circulation, public water supply, industrial and rural water supply and various other applications.

Technical specifications of our range are as follows

SPECIFICATIONS
Power Range	2.2. kw to 15 kw Three phase, 2 pole.
	2.2 kw to 3.7 kw Three phase, 4 pole.
Speed	2880 RPM, 1440 RPM.
Version	A.C.,50 Hz.,Three phase ,380-415V.
Insulation Class	A / E / B / F.
Type of Duty	S1 (continuous).
Method of Starting	2.2 kw to 3.7 kw Direct On Line (D.O.L) Three phase.
	5.5 kw to 15 kw Star Delta (SD) Three phase.
Sealing	Asbestos Graphite Packing Rope / Oil Seal.
PERFORMANCE RANGE
Flow Rate upto	27 LPS.
Total Head upto	95 mtrs.
Nominal Pump sizes (Suction x Delivery)	50 x 50 mm. (2" x 2")
	65 x 50 mm. (2.5" x 2")
	80 x 65 mm. (3" x 2.5")

Our extensive range includes domestic centrifugal monoblock pumps that are manufactured from material that are as per the standard specification. It has a superior mechanical shaft seal that ensures longer life & effective sealing against water leakage. Further, all the rotating components are dynamically balanced & its uni-casting volute chamber is designed to give higher hydraulic efficiency. Some of its other specifications are as follows :

• Resistant to wide voltage fluctuations &high temperature rise.
• Air locking is prevented by center delivery casing.
• Good suction lift features &.greater water discharge rate & low power consumption.
• Pumpset employs at 200 / 240 Volts, 50 Hz., capacitor start & run, 2850 RPM & totally enclosed fan cooled motor.
• Anti-friction ball bearings that are grease lubricated are fitted at both ends to withstand radial & axial loads.
• Single phase motor without centrifugal switch facilitates easy maintenance.

Application areas include irrigation, agriculture, farms, gardens, industries & various other civil applications.

Technical Specifications are as follows:

SPECIFICATIONS
Power Range	0.37 kw to 1.5 kw , Single phase, 2pole
	0.37 kw to 1.5 kw , Three phase, 2 pole
Speed	2850 / 2880 RPM
Version	A.C.50 Hz., Single phase 200-240 V Permanent Split Capacitor (CSR)
	A.C. 50 Hz., Three phase 380- 415 V Direct On Line (DOL)
Insulation Class	A / B
Type of Duty	S1 (continuous)
MATERIALS OF CONSTRUCTION
Pump Casing	Closed Grain Graded Cast Iron
Motor Frame	Closed Grain Graded Cast Iron / Aluminium
Impeller	Closed Grain Graded Cast Iron

We are offering a wide range of self priming pumps that offer hassle-free operations. These self priming pump eliminates the use of foot valve & have high and fast suction properties. The motor is manufactured as per IS : 996 that facilitates high starting torque. The pump is provided with C.I motor frame, gun metal & brass impeller & stainless steel shaft that avoids corrosion. Some of its other features are as follows :

• Designed for wide voltage fluctuations.
• Vibration free smooth operation.
• Perfect head and discharge.
• Sturdy & compact design
• Closed grain graded cast iron parts.
• Single & three phase options.
• High head due to regenerative action.
• Permanent split capacitor for single phase motor where centrifugal switch is not required.
• Superior water seal .

Application areas include pressure boosting & washing water circulation, laundries, hospitals, foundations, offices, dairies, construction sites and many more.

Technical Specifications are as follows :

OPERATING LIMITS AND SPECIFICATIONS
Power	0.19 kw, 0.37 kw and 0.75kw (0.25 H.P and 1 H.P)
Frequency / Speed	50 Hz. / 2880 RPM
Maximum Suction Lift	8 mtrs.
Flow Rate	0.93 LPS.
Total Head	50 mtrs.
Class of Insulation	A / B
Type of Duty	S1 (continuous)
Maximum Liquid Temperature	30 oC
Maximum Ambient Temperature	40 oC

The jet pumps that we are offering find applications in small farms, gardens, hotels, houses, small industries and various other fields related to water supply. Made from top quality material and with the application of CNC machines, these jet pumps can perform even at low voltages. It is provided with
dynamically balanced rotating parts, impellers & high quality single shaft for motor & pump. Other features of the range are as follows :

• Good suction lift.
• Compact design.
• Resistant to wide voltage fluctuations.
• Servicing can be done with ease at minimal cost as the motor & pump are accessible at the surface.
• When used in openwell, pump is immune to variation of water level & hence does not require any change in the position of the pump.

Technical Specifications are as follows :

SPECIFICATIONS
Power Range	0.37 kw to 1.5 kw Single phase, 2 pole
	0.37 kw to 1.5 kw Three phase , 2 pole
Speed	2850 / 2820 / 2800 RPM
Maximum Suction Lift	64 mtrs.
Discharge	400 LPH
Delivery Head Range	16 mtrs.
Version	A.C. 50 Hz., Single phase 200 - 240 V,
	Permanent Split Capacitor (CSR) and A.C., 50 Hz.,
	Three phase 380 - 415 V, Direct On Line (DOL)
Class of Insulation	A / B / E
Type of Duty	S1 (continuous)
Sealing	Mechanical Seal (Carbon and Ceramic)
Nominal Pump sizes (Suction x Pressure x Delivery sizes in mm )	40 x 32 x 25 and 32 x 25 x 25
Maximum Liquid Temperature	33 oC
Maximum Ambient Temperature	45 oC

The bore well pumps are manufactured from standard material that adds greater operational efficiency and longer service life. We use S.S. & high grade engineering plastic components that are resistant to corrosion & abrasion. Its simple construction coupled with precise parts ensures better and longer life. Some of its other features are as follows :


• Water lubricated wet type motor.
• Water cooled.
• Easily dismantled & repaired.
• Can handle up thrust loads.
• Designed for withstanding wide voltage fluctuations.

Application areas includes

• General purposes like domestic & community water supply, buildings, housing complexes and others.
• Irrigation purposes like drip, sprinkler & open irrigation, gardening, seed farms, nurseries and others.
• Industrial purposes where small water discharge is required at high pressure like dairy industries or low pressure high discharge in industries, air conditioning installations, mining industries and many others.

Technical Specifications are as follows :

SPECIFICATIONS
Nominal Diameter	96 mm. (4")
Power Range	0.37 kw to 1.5 kw, Single phase
	0.75 kw to 3.7 kw, Three phase
Speed	2800 RPM
Flow Rate (LPS)	0.25 - 4.5
Total Head Range	250 mtrs.
Nominal Outlet sizes	25 mm. (1"), 32 mm. (1.25"), 40 mm.(1.5"), and 50 mm. (2").
Version	50 Hz., 200 - 240 V A.C., Single phase
	50 Hz., 380 - 415 V A.C., Three phase
Maximum Outer Diameter	96 mm.
Type of Duty	S1 (continuous)
Maximum Starts per Hour	6 times

The range of deep well pumps that we are manufacturing and supplying are extensively used for irrigation that includes drip & Sprinkler irrigation, agriculture, public water supply, industrial & rural water supply and varied other fields related to water supply. These deep well pumps are precision engineered with the use aid of CNC machine that ensures defect-free pumps are produced. The pumps have no suction & priming problems and do not require pump house. Other features are as follows :

• Noise-free operation

• High functional efficiency.

• Highly durable water cooled rewindable motor.

• Can be easily dismantled & repaired.

• Specifically designed for wide voltage fluctuations.


Technical Specifications are as follows :

SPECIFICATIONS
Nominal Diameter	150 mm. (6")
Power Range	2.2 kw to 26 kw. Three phase
Speed	2850 RPM
Flow Rate	0.75 - 21 LPS
Total Head Range	9 - 250 mtrs.
Nominal Outlet sizes	50 mm. (2") and 65 mm. (2.5")
Operating Range	50 Hz., 380 - 415 V, A.C Three phase
Maximum Outer Diameter	143 mm.
Type of Duty	S1 (continuous)
Maximum Starts per Hour	6 times
Method of Starting	2.2 kw to 5.5 kw Direct On line (DOL), 5.5 kw to 26 kw Star Delta (SD)

We are one-stop platform that is offering various types of pumps. The open well pumps are widely used for areas related to water supply like irrigation, drip & sprinkler irrigation, agriculture, public water supply, industrial & rural water supply. Made from superior quality material, these open well pumps have high operating efficiency & can be easily dismantled & repaired. Other features are as follows :

• No suction & priming problems.
• No requirement for pump house.
• Noiseless operation.
• Highly durable water cooled rewindable motor.
• Designed for wide voltage fluctuations.

Technical Specifications are as follows :

SPECIFICATIONS
Power Range	0.37 kw to 1.5 kw, Single phase
	0.75 kw to 22 kw, Three phase
Speed	2880 / 2850 RPM
Flow Rate	0.2 to 65 LPS
Total Head Range	6 to 115 mtrs
Nominal Outlet sizes	50 mm. (2"), 65 mm. (2.5"), and 80 mm. (3")
Type of Duty	S1 (continuous)
Operating Range	50 Hz., 380 / 415 Volts A.C., Three phase
Maximum Starts per Hour	6 times
Method of Starting	0.75 to 5.5 kw, Direct On Line (DOL), Three phase,
	5.5. kw to 18.75 kw, Star Delta (SD) Three phase
Cable Connection	Permanently connected and sealed PVC insulated 3 core flat cable.

We are making available an extensive gamut of A.C. squirrel cage induction electric motors that find applications in industries, domestic, agriculture, compressors, power looms, sugarcane crushers, textile machinery and many other areas. Sturdy construction and compact design ensures durability and high functional efficiency. These are designed to withstand wide voltage fluctuations.

Suitable for 200- 240 V, Single phase & 380- 415 V, three phase, 50 Hz. power supplies, it is provided with enclosed fan cooled squirrel cage induction motors & large-sized ball bearing that ensures extended life. Further, our range is available with available with A, B and F class insulations & high output cooling fan that facilitates better cooling. Other features are as follows :

• Low operational cost & maintenance cost.
• Flange mounted motors & foot mounted motors.
• Special heavy duty agriculture & thrasher models, 3.7, 5.5, 7.5, 11 and 15 kw in 4 - pole phase version motors are available. They are made for heavy variable loads & wide voltage fluctuations that occur in agricultural fields.
• Rigid Cast Iron construction.
• Flange mounted motors can be provided.
• Eye bolt provided from 3.7 kw onwards for easy handling.
• IP 44 protection as standard.

Technical Specifications are as follows :

SPECIFICATIONS
Power Range	0.37 kw to 1.5 kw, Single phase - 4 pole
	0.37 kw to 45 kw, Three phase - 6 pole, 4 pole, 2 pole
Speed	6 pole - 960 RPM, 4 Pole - 1440 RPM, 2 pole - 2880 RPM
Version	A.C. 50 Hz., Single phase, 200 - 240 V, Capacitor Start and Capacitor Run (CSCR) and A.C. 50 Hz., Three phase, 380 - 415 V, Direct On Line (DOL), Star Delta (SD)
Degree of Protection	IP 44 / IP 55

We are trusted name in manufacturing main switches which have been provided with resistance towards climatic variations, dust and conduit entry. These cases and covers are constructed of cast iron sheet metal which have special chemical treatment with tow coats of protective paint Electrical Stoving finish.

Its position of the operating handle clearly indicates if the switch is in the “ON” or “OFF” position. All the current carrying parts are industrial phosphors bronze, imported 99.95% grade, pure copper and electroplated. These units have internal fixing holes to fit on wooden board. Our product is very well tested and approved by all the government departments. Further, the product comprises the following technical specifications:
Specification and Details:-

Design
All units are weather and Dust proof and conduit entry. The cases and covers are constructed of cast iron sheet metal with special chemical treatment and with tow coats of protective paint Electrical Stoving finish.

AMPS	Volts	Poles	415 Motor Rating
			KW	HP
16 A	240 V	DP
16 A	415 V	TP
16 A	415 V	TPN	5.5	7.5
32 A	240 V	DP
32 A	415 V	TP
32 A	415 V	TP
32 A	415 V	TPN	11	15
63 A	415 V	TP
63 A	415 V	TPN	22	30
100 A	415V	TP
100 A	415 V	TPN	30	40

Our miniature circuit breaker is an automatically-operated electrical switch which is designed to protect an electrical circuit from the damages caused by overload or short circuit. Our circuit breakers are made in different sizes for various devices which can be small or large in size designed to protect high voltage circuits required for a city. Our products is well approved by all government departments. Following are some technical specifications of these circuit breakers:

Number of Poles	1, 2, 3, 4, 1+N , 3+N
Breaking Capacity to IS: 8828-1998	> 10 KA
Rated Voltage AC	240 / 415 V-
Rated Voltage DC	48 V... 1-pol.: 110V.... 2-pol
Installation Category	68 mm, to DIN 43880
Contact Life	20, 000 operations
Insulation Category to VDE 0110	C at 250V -
	B at 380 V-
Protection to DIN 40050	IP 40
Terminals Input	Compression Screw clamp terminals for max. 25 mm²
Output	Bus terminals for max. 16²
Installation Mode	Can be used in any plane
Sealing	Knob can be sealed in either the on or off position to Inbuilt manual operation
Climatic Conditions	To DIN IEC 68, Part 2-3/2-30
Vibration Resistance	> 15 g to IEC 68, Part 2-6
Shock Resistance	25 g -11 ms
Available Range	From 6 Amp. To 63 Amp in Single, Double, Triple and four Pole

We are a recognized name in manufacturing change over switch which can withstand climatic variations, dust and conduit entry. These cases and covers are constructed with sheet metal and given special chemical treatment along with two coats of protective paint electrical stoving finish.

Its position of the operating handle shows if the switch is “ON or “OFF”. All current carrying parts are made of industrial phosphorus bronze, imported 99.95% grade , pure copper and Electroplated. Further, these units have internal fixing holes to fit on wooden board. As far as there quality approval is concerned, our products is tested & approved by all government departments, for their own consumption and usage of precious series of unique switchgear.

Design
All units are weather and Dust proof and conduit entry. The cases and covers are constructed sheet metal with special chemical treatment and with two coats of protective paint Electrical Stoving Finish.

The Position of the Operating handle clearly indicates whether the Switch is in the “ON or “OFF” position. All current carrying parts are of Industrial phosphorus Bronze, Imported 99.95% grade , pure copper and Electroplated. All units have internal fixing Holes to fit on wooden board.

Amps	Volts	Pols	415 V Motor KW	HP
16 A	415	3
		4	5.5	7.5
32 A	415	3
		4	11	15
63 A	415	3
		4	22	30
100 A	415	3
		4	30	40

We also manufacture the reverse and forward switch which are been manufactred with the quality raw materail and is been suplied as per client's specifications. These switches are also available in the standard format aswell.