Copper rivets have a formed shape when the solid end of the shank is headed over or hammered. These rivets have a small diameter and are manufactured from pure copper. Copper Rivets possess good electrical properties and are corrosion resistant. These rivets have been used in many large-scale applications including shipbuilding, boilers, pressure vessels, bridges and buildings etc.

Our range includes:

• Copper-Big-Rivets – Copper big rivets are generally used in engineering industries and in other industries where heavy products are manufactured like – automobile industry, etc.
  
  
• Copper-Hollow-Rivets – The copper hollow rivets manufactured by us are used in various types of industries as fasteners. The copper rivets are stronger than the aluminum rivets.
  
  
• Copper-Screw – The copper screws are permanent fasteners and used in wide ranging industries. The screws are not hammered but passed through holes to fasten various types of products.
  
  The big and hollow copper rivet and the copper screws manufactured in our manufacturing unit are available in various sizes ranging from - Diameter - 1.5 mm to 6 mm and Length - 25mm.

Cluster Panels/ Relays/Moving Contacts/Fixed contact as per customer specifications. This Contact made out of silver and its alloys:

• Silver-copper
• silver-cadmium
• silver-copper-gold,etc
• Form of disc from, profiles form available according to customer specifications.

We manufacture Heavy Duty Cluster Assemblies of different shaped and bendings with modern technique of brazing of red copper tubes. Our manufacturing process for fittings, suctions, elbows, tee and connectors etc. for all types of Breakers

Bus bars links are produced to the detailed specifications of our customers. We are one of the largest copper fabricators of copper bus bars in India. Our business involves copper and we offer a variety of metalworking capabilities,

• Material - As per customer requirement
• Range -   As per customer requirement
• Finish -  As per customer requirement

We offer fixed contacts/power contact/moving contact/stationery contact that generally used in electrical equipment as a Tap changers, reverse switch, Breakers(Air, Oil & Vaccum) and support to fix some screws. Used in switch poles, these are the throws or ways against which the moving pole can rest. In a condition where single or multiple contacts is required to make more than two fixed contacts, then fixed contacts are referred as poles. In the case of electrical appliances, a number of fixed contacts are termed as throws.

• Ranges From : 400amps to 6000 amps

We offer cluster assemblies for all type of Breakers and that are used for interconnection purposes for various electronic gadgets such as computers, televisions and others. We offer assortment of  assemblies that are finely kept and well maintained through our production unit to meet the specific requirements of our clients. These are made from quality raw material to ensure better functionality and longevity.

Bus bar onnectors, Laminated Busbars and Copper Ground Busbars are produced to the detailed specifications of our OEM customers. Storm Copper Components is one of the largest copper fabricators of copper busbars in the United States. Virtually all of our business involves copper and we offer a variety of metalworking capabilities, all based on CNC technology. Our equipment includes shear, presses, press breaks and punching machines. Our materials, processes, and finished components are engineered to meet, as needed, standards required by customer Requirement.

Copper connectors is typically used in high current, low voltage distribution and control equipment. Typical bus bar applications include busway systems, low and medium voltage switchgear, panel boards, switchboards, and feeds to heavy electrical uses in commercial and industrial buildings - such as plating cells and feeder systems.
Bus bars can be made from copper or aluminum, but the copper bus bars are the better electrical conductors. Because of copper's greater electrical conductivity, installers can use smaller bus bars if they are made with copper.  

The higher the current requirements, the more likely the bus bar will be made from copper. Copper bus bars have better resistance to corrosion than aluminum bus bars, and the copper bus bars work better in dirty environments.
 
Application :

• Wide Range of Electrical Industries. eg. Switchgears, Connectors etc.
• Transformers & Circuit Breaker Terminals
• Electrical Holders & Clamps
• Distellation & Sugar Industry
• Automobiles and railways

An isolating connector is disclosed for isolating the center conductor of a shielded cable from DC and low frequency AC potentials. The connector includes a generally tubular shell which is connected to the cable's shield and within which a connector pin is located for coupling to a female plug. A capacitance inside the shell is connected in series with the pin and the cable's inner conductor.

Also inside the shell are two bleeder resistances, one connected in parallel with the capacitance and another connected in series between the shell and the connector pin. With this arrangement, any DC or low frequency AC potential appearing on the cable's inner conductor is isolated from the connector pin, and a discharge path is provided for the capacitance in the shell and any capacitance serially coupled with the cable's shield.

We provide a huge variety of Heavy Duty connectors in diverse designs and technical specifications. Our range of precisely-manufactured connectors is widely used to perform panel works and different types of wire connections. Reckoned for their excellent withstanding capacity in high temperature, current or voltage fluctuations and other conditions, these connectors are used in diverse industrial purposes.

We offer connectors in size ranging between 2.5sqmm and 100sqmm.

We offer fixed contacts/power contact/moving contact/stationery contact that generally used in electrical equipment as a Tap changers, reverse switch, Breakers(Air, Oil & Vaccum) and support to fix some screws. Used in switch poles, these are the throws or ways against which the moving pole can rest. In a condition where single or multiple contacts is required to make more than two fixed contacts, then fixed contacts are referred as poles. In the case of electrical appliances, a number of fixed contacts are termed as throws.

• Ranges From : 400amps to 6000 amps

We offer Heavy duty cluster assemblies for all type of Breakers and that are used for interconnection purposes for various electronic gadgets such as computers, televisions and others. We offer assortment of  assemblies that are finely kept and well maintained through our production unit to meet the specific requirements of our clients. These are made from quality raw material to ensure better functionality and longevity.