Instrumentation Control Panels,LT Control Panels,Capacitor Panels,MCC Panels,India

Home

Profile

Our Products

Enquiry

HT Breaker Panels - RMU - Upto 36 KV	MV- LV Soft Starter - VFD Panels	DG-Grid Synchronizing-AMF Panels Upto 11 KV	NGR-LAVT-Exciatation Panels Upto 11 KV

APFC Panels Isolator - LBS-CO-SW - HT Panel Upto 33 KV	HT- LT Bus Duct Upto 12 KV	LT Control Panels - PDB-PCC	MV- LV Soft Starter Panels

Drawout - Fix MCC Panels-PCC Panels	PLC - INSTRU - MIMIC - VFD Panels	Purge Panels - LIQUID - OIL - GAS - AIR	Capacitor Panels (APFC - Thiristor) and Fire Protection

Instrumentation Control Panels

We are one of the leading a manufacturer and supplier of electrical and instrumentation control panels for a choice of application. These are manufactured using quality electrical switchgear, aluminum/copper busbar, insulator, wires/cables, PVC channels transformer, SMPS, meters, switches that are procured from the reliable and established vendors. Our array of electrical and instrumentation control panels are widely appreciated for their reliability, high performance, lesser cost of maintenance and easy installation. These can also be customized as per the specifications provide by the clients.

Our assortment includes the following:


				HT Breaker Panels - RMU - Upto 36 KV We are one of the leading manufacturer and supplier of indoor/outdoor type vacuum /sf6 gas based HT Breaker Panels. This is available up to 36kv,26Ka, range medium voltage products with having withdraw able/fix type facility insulation lavel-for 12kvsystems= 12/28/50kvp &36kv-systems=70/120/170. We use quality electrical switchgear, aluminum/copper busbar, insulator, wires/cables, PVC channels transformer, SMPS, meters, switches that are procured from the reliable and established vendors. Our HT breaker panels are consisted of separate compartment for metering/voltage trafo, busbar and cables. The equipment have a fully compartmentalized construction with IP4X/5X degree of protection, independent exhaust vent for all compartments. This equipment is extensively used for backup protection of power Transformers, generation, capacitor banks and power distribution. Our HT breaker panels and RMU is widely appreciated for its reliability, high performance and lesser consumption of electricity.

Send Query


				MV- LV Soft Starter - VFD Panels We are engaged in manufacturing and supplying quality M.V Motor Starter/VCB/VFD Panels - Upto 11 KV. This equipment is a type of indoor type vacuum contactor /vacuum circuit breaker up 12kv, 40Ka for 3 sec. the equipment is equipped with range medium voltage products with having withdraw able and fix type facility insulation lavel-for 12kv-sys- 12/28/50kvp. These are a separate compartment for VFD, metering, voltage trafo, busbar, cables and vacuum contactor. The panels are fully compartmentalized structure with IP4X and 5X degree of protection, independent exhaust escape for all compartments. This device can be extensively used for backup protection of motors, compressor, blowers, boll mill power and distribution. We can also customize the device as per the specific requirements of the clients. The device is widely appreciated for its high performance, durability, lesser cost of maintenance and low power consumption.

Send Query


				DG-Grid Synchronizing-AMF Panels Upto 11 KV We manufacture high quality DG/Grid Synchronizing/AMF Panels with a capacity upto 11 KV. This is widely used in the electrical, electronic, telecommunication and allied industry. The panels are indoor type synchronizing and load sharing panels that are fully compartmentalized and desk type construction with IP42/52 degree of protection. We use premium electrical components such as aluminum/copper busbar, insulator, wires/cables, PVC channels transformer, SMPS, meters and switches for fabricating the panels. These panels are offered for multiplel DG/Gas Gen.set has the following working procedure: • To be operated In parallel are fast / reliable • Synchronizing & precise KW Load sharing Inbuilt protections for engine,generators & Mains like over current,overload,earth fault • Reverse power,over/under voltage,low oil pressure,high water temp. over speed & SYNC CHECK ,AMF,etc. GRID paralleling is possible with import/export control PLC for system logic configurable input/ output as per requirement Some of the salient features include: • Highly performance • Easy operation • Easy to install • Lesser cost of maintenance

Send Query


				NGR-LAVT-Exciatation Panels Upto 11 KV With the assistance of our professionals, we offer NGR/LAVT/Exciatation Panels with a capacity up to 11 KV. The panel is suitable for both indoor and outdoor construction with IP42/52 Degree of protection. The NGR is offered in punched and formed stainless that gives a better performance. The NGR is required in AC Distribution System to limit the fault current which would flow from transformer or generator neutral star point in the event of earth fault in the network it is required when the neutral of supply transformer is accessible and its own impedance is not enough to fault current. The rating of NGR should be select fault current the fault current is limited necessary to operate the protection relay. We use premium steel, fe cr ai, cast iron, copper nickel of nichrome in order to manufacture the panels. The NGR/LAVT/EXCIATATION PANELS are essential for co-generation, biogas plant, steel plant, power generation with a capacity up to 66KV.

Send Query


				APFC Panels Isolator - LBS-CO-SW - HT Panel Upto 33 KV We manufacture quality Isolator/LBS, C/O SW HT Panel that is capable of meeting the requirement up to 33 KV. The panel is a type of indoor/outdoor Type Air/sf6 gas Based LBS/ISOLATOR up 36kv,20Ka,630amp,3ph range medium voltage products with having simple and effortless switching with mechanical status indicator. This have three positions such as closed, open, earthed representing a natural interlocking systems that prevent incorrect operation POWER FUSES incorporate as required. Some of the specifications include: • Having separate compartment for metering/ voltage trafo/ busbar/ cables etc. • Having fully compartmentalized construction with IP4X/5X degree of • protection • This product using for backup protection of power transformers, generation, capacitor banks .power distribution

Send Query


				HT- LT Bus Duct Upto 12 KV We manufacture highly efficient HT/LT Bus Duct with a capacity up to 12 KV. This is offered with both indoor and outdoor construction with IP42/55 degree of protection. The type of busduct are offered in aluminium and copper based and manufactured as per the International Standards. The device is - 8623-2/1993 for low voltage up to 1kv busbar trunk systems and IS- 8084-1992. The Bus Duct is specially developed for voltage above 1kv up to and including 36kv. The metal enclosed bus systems are based on design parameters and service conditions as per the application of bus ducts which follows: • Non-segerated/segerated /Isolated phase,cross overchamber,vertical /horizontal . • Bus-duct calculation for Designing Carrying conductor ,Heating effects, Thermal effects ,electro dynamic force, Voltage drop • Skin & proximity effects in the terms of busbar reactance,etc. • Low volt product & medium voltage products having insulator support capacity should be 2.5kv & 11kv respectively with high tensile fastener for bus bar joints & copper flexible • This product using for Power Generation is carried from the generator to the power Transformers & distribution of LT/HT.

Send Query


				LT Control Panels - PDB-PCC We offer high performance LT control panels/PDB/PCC for para-motor, power control centers. These are offered in both standard and customized designs with Busbar ratings up to various capacities. It has a short circuit withstand capacity that is supported by cubicle type compartmentalized construction. The control panels can be easily floor mounted and extendable on both sides. It has an option of cable entry from top or bottom and customer choice of switchgear. These control panels are widely appreciated for their reliability, high performance and east maintenance.

Send Query


				MV- LV Soft Starter Panels We manufacture and supply qualitative MV Soft Starter panels. These are widely used to eliminate the high inrush current and start-up torque on every start. These also provide starting parameters that increase the life of heavy-duty compressor & blower, ID/FD, fans, chillers, coolers and pumps. We use premium electrical components, compressors, motors and allied material for the fabrication process. The soft starter panels are incorporating with motor protection device/relay as RS 485 communicable with overload, under current ground fault current imbalance over temperature package. Specifications: • Soft starter principle of Flux compensated non-saturated magnetic amplifiers for controls of motor starting current. • The starter should not introduce any hormonics & volt drop. • Facility can provide By pass contactor & starter cabinet having IP-31 protection with LBS Fuses As I/c.

Send Query


				Drawout - Fix MCC Panels-PCC Panels We manufacture and supply PARA-DRAWOUT MCC panels enclosure that is spring loaded scraping earthing provided with first make and last brake arrangement. It has large cabling space with adequate cable supports are provided in CBC. The incoming and outgoing stab in type power contacts up to multiple amps that provide very large range of feeders of different types. Some of the salient features: Fully draw-out type compartmentalised, modular construction. Each trolley is provided with distinct SERVICE / TEST / ISOLATED positions. Flexible arrangements of modules /trolleys. Fully inter-changeable draw-out modules Fully enclosed dropper system with cutouts for plug-in contacts. Automatic safety shutters are provided to shroud the incoming live contacts when trolleys are removed. Single-front or Double-front arrangement with independent droppers for front and rear panel Telescopic rails with Bobbin roller to ensure perfect alignment of plug-in contacts Racking Trolley in & out can be through suitabely designed cranking screw arrangement. Male / Female type power and Sliding type silver plated copper /brass control contacts are provided Screw type withdrawal and plug-in arrangement Instrument plates in swing-out design for mounting feeder instruments, push buttons, indicating lamps, overload, reset push-buttons. Etc. Positive earthing through scraping arrangement on the draw out modules and separate vertical earth bus for each section

Send Query


				PLC - INSTRU - MIMIC - VFD Panels We design and manufacture PLC - INSTRU - MIMIC - VFD Panels for switchgear, instrument & process controller. These panels are equipped with Acrylic/Semigraphic Mimic for process flow indicator. Moreover, it is specially constructed with front and rear access for easy wiring and maintenance. Our array of PLC & Inverters (Drives) device are capable of controlling machine & processes in control panels replacing in flexible relay based control systems to reduce the high cost of rewiring/caballing, switchgear components. These are designed to give sophisticated front appearance and spacious internal layout to facilitate easy preservation. For a better efficiency, these are equipped with a console, which acts as an integral part in both simplex or duplex design of the control panel.

Send Query


				Purge Panels - LIQUID - OIL - GAS - AIR We are one of the leading manufacturers and suppliers of purge panels. These panels are suitable for indoor type purge and pressurized panels and are fully non-compartmentalized. These are offered in stainless steel/MS construction with IP42/52 degree of protection. These are widely used for air pressure/Liquid /gas oil.etc reducing station with pre. regulator .filter, copper/ HDP nylon PVC tubes, tubings and air header with necessary solenoids/pneumatic components and fittings. These can be operated in parallel LPG /AIR For flare Stack systems to burn wastage gas. These is a provision for import and export control through PLC for system logic configurable input/output as per requirement.

Send Query


				Capacitor Panels (APFC - Thiristor) and Fire Protection We are one of the leading manufacturers and suppliers of automatic capacitor panels that are the perfect solution for all power factor problems. These are capable of maintaining unity power factor. These are specially design power factor correction panels so that it helps in cutting down electricity costs. These panels comprises of a power factor controller that accurately monitors reactive power in power systems in order to save energy. These are also used to monitor the power factor of various electrical systems. We can also customize these panels as per the specifications [provided by the clients.

Send Query

Home | Profile | Our Products | Contact Us | Enquiry