We are a leading manufacturer and supplier of electrical and instrumentation control panels that is used in various electrical applications. Our array includes:

• HT Breaker Panels/RMU - Upto 36 KV,
• M.V Motor Starter/VCB/VFD Panels - Upto 11 KV,
• DG/Grid Synchronizing/AMF Panels Upto 11 KV,
• NGR/LAVT/Exciatation Panels Upto 11 KV,
• Isolator/LBS, C/O SW HT Panel Upto 33 KV,
• HT Bus Duct, LT Bus Duct Upto 12 KV,
• LT Control Panels/PDB/PCC,
• MV/LV Soft Starter Panels,
• Instruments Panels,
  
• Drawout/Fix MCC/PCC,
• PLC/INSTRU/MIMIC/VFD Panels,
• Purge Panels (LIQUID/OIL/GAS/AIR) and
• Fire Protection/Capacitor Panels.

To maintain the quality of the control panels:

• We will design and manufacture equipment as per customers requirement as per customers requirements conforming to applicable standards of safety and quality parameter.

• We will design equipment that is cost effective and waste reduction

• The required improvements to achieve optimum customer confidence & satisfaction

• Total Quality concept extensive quality of manufacturing-fabrication painting assembly & wiring along with inspection of incoming material maintain the total

We perform tests like:

• HIGH VOLTAGE TEST - 0-5KV

• MEGGER - 1000VOLT

• MULTIMETER

• H.V.TESTER - 75KV

• INSULATION RESISTANCE TESTER - 5000V

• SEC. CURRENT INJECTION TEST KIT

All routine tests as per IS: 8623 PBRT I & II & IEC-439-2 (1987) carried out on finished product.

1) Fix/Drawout - MCC/PCC	Design Short circuit with stand strength have already been tasted at CPRI Bhopal (India) 50 KA for 1 second as per IS 8623. 1250 A Temperature test as per IS 8623 1993
2) Degree of protection	Encioser type tested at ARAI.Pune (India) as per 15 -13947 (Part I) 1993 i.e.
3) L.T.Panel	design short –circuit with stand strength Tested at CPRI Bhopal 65 KA for 1 sec 5000 A Temp-Rise Test
4) Approval of Control Panel at TARIF Adversary Committee, Mumbai regional Office (India) TARIF Adversary Committee, Mumbai regional Office (India)	Tested as per Factory builts. Assembly upto - 3500 AMP .Temp rise limit tested as per IS:8623 Part-1,1993.Tested as per Factory
5) Type Tested at ERDA for HT Pane	Indoor 11 kV CB Panel a. Short type withstand current and peak withstand current test 26.1 KA rms for 3 second as per IEC:62271 -100 (2001) & IEC 60694 (2002) b.1 OOO amp temperature rised test as per IEC: 62271-200 (2003) c. voltage withstand test insulation level -12kV / 28 kv rms /75kVP as per IS:3427 (1997)/IEC 298 (1990) d. Dry power frequency voltage withstand test 12kV .26.1 kA for 3 second 6> 28 kV rms for 1 minute as per IS 3427 -1997 / IEC 298 (1990)

With a vast industrial experience in this industry, we are able to meet diversified requirements in the following industries. These include:

• IOCL
• BHEL
• LIOYDSTEEL
• ISPAT
• SERAM
• Reliance Industries Ltd.
• ZIEMAAN
• GARWARE
• KIRLOSKAR Group of Co.
• CUMMINS.INDIA
• VOLTAS.LTD
• TATA MOTOR
• TISCO – Jamshedpur
• Reliance Energy
• THARMAX Ltd.
• ACC CEMENT Ltd.
• SUGAR FACTORIES
• Serum Institute of India

Our organization is able to establish a noteworthy position in the industry with the assistance of a meticulous team. Our experts have a rich expertise in their respective field that helps them in working in close proximity with each other in order to ensure the smooth running of the production process. Our engineers and technicians make sure that each product fulfill the specifications and quality standards as desired by our clients.

Our experienced engineers provide technical expertise, guidance, peer reviews of proposals and assistance with safety and quality assurance audits. We also possess a team of capable and experienced merchandisers who are engrossed in comprehending the needs of clients and make sure that our every consignment reaches its destination within the stipulated period. We are also supported by strong marketing professional and sales executives who are entitled of smooth functioning of our business and serve the clients with the best services.

We have a robust manufacturing unit located in Maharashtra. It is segregated into various departments such as designing unit, production unit and storage unit. Our manufacturing unit is spread across a sprawling area of 1,500 square feet and equipped with the latest designing and engineering technologies that ensure a faster and efficient rate of production. We have a in-built designing unit that is supported by CAD/CAM software.

Some of the machines and equipment that are installed in our manufacturing unit includes:

• Power press break
• Power shearing m/c
• Radial drill m/c
• Compressor.5hp
• Hand drill m/c
• Hand grinder/sander m/c
• Hyd.busbar bending m/c

These machines are regularly checked in order to maintain the efficiency and further help in meeting the bulk demands of the clients. Further, with the assistance of the machines, we have achieved the installation capacity of 25 units.

Our Research & Development department is technically equipped with a team of research personnel who have a great expertise in the relevant areas. They are engaged in conducting researches on the new developments related to our present assortment of high performance power and distribution systems.

To upgrade our existing assortment, our research & development wing conducts research on following factors:

• Raw material
• Technology used
• Manufacturing process
• Design

The development process is conformed as per the present range and company’s resources. Only after the complete assurance of the flexibility and effectiveness of the development, the new techniques are directed to the respective departments for the implementation process.

Since the inception of the organization, we are satisfying the needs of our clients by offering them an exquisite range of control panels and allied equipments. Our range is accredited in almost all the corners of the globe. Our assortment is also complimented by wide variety of electrical and instrumentation to various industries. We have been permanently enlisted for manufacturing and supplying of control panels to reputed clients in the leading industrial price.

Some of our renowned clients include:

• KALYANI GROUP
• ALFA LAVAL
• SEZ BIO-TECH PHARMA.
• MENON.GROUP
• RELIANCE INDUSTRIES
• THERMON.SHIRKE GROUP
• KIRLOSKAR OIL ENGINES
• D.B.Power Electronics Ltd.
• Ruby Hall Clinic Design
• Central Railways
• National Dairy Dev.Corp.
• TATA Consulting Engineering
• Kvaerner Power Gas
• Military Engineering Services
• Hindusthan Aeronatics Ltd.
• TISCO (Jamshedpur)
• ThyssenKrupp India
• Mangalore Refinery & Petrochemicls Ltd
  
• Schneider Electric India Pvt. Limited
• Airports Authority of India
• ABB
• L & T (Chemical Div.)
• Bharat Heavy Electricals Limited      
• Mecon Limited
• PDIL
• Vishakhapattanam Steel Plant
• ACC Cement
• Hindusthan Dev. Corp.
• National Paraoxide Ltd.
• M.N.Dastur Ltd.
• BARC
• Hariyana Steels & Power
• Mandhan Steels Ltd.
• Ansul Steels Ltd.
• Menon Pistons Ltd.
• Menon Bearings Ltd.
• Fine Organics Ltd.
• Jabil Curcuits India Pvt.Ltd

Some of the factors why we are ahead of our competitors include:

• Qualitative assortment
• Skilled technocrats
• Money transfer through bank, cash, demand draft and E-payment
• Vast industrial experience of 23 years
• Government test laboratories
• ISO Certified Company
• Delivery within stipulated timeframe
• Ethical business policy