Asian Steel Corporation


Steel Sheet C-45

Steel Sheet C-45

Avail from us a compendious range of C - 45 Sheet at reasonable prices. This range is extensively used by our patrons in varied industries for manufacturing varied types of products. Moreover, we are delivering these C - 45 Sheet to our patrons in varied dimensions in accordance with their diversified requirements and choices.

Spring Steel C-80

Spring Steel C-80

C – 80 grade Cold, Rolled & Annealed Steel Strips

Composition: C     : 0.75 - 0.90%
Mn   : 0.50 - 0.90%
Si     : 0.10 – 0.35%
S&P : 0.04% Max


This grade of Strip is stocked in Annealed condition, 200 HV Max Hardness. However can also be supplied in different temper in range of 200 – 400 HV on request, please check for Minimum economic batch quantity & lead time

This is available in ready stock in Thickness range of 4.0 to 0.25 mm in width of 250 - 1000 mm, Can be slitted, Sheared, decoiled as per the customers request.

This grade compares well with following grades.

  • AISI 1080/1085
  • CK 75/80
  • HC – 14/ EN - 42J/DIN 17200
  • 80 C6 of IS 2507of 1975
  • JIS - S 80C & Sup 3

Spring Steel C-55

Spring Steel C-55

We are engaged in offering a comprehensive range of C-55 Coil Plate Strips, which is available in varied specifications. Manufactured using premium quality steel and other material, these plate strips are known in varied industrial applications. Clients can avail these strips at reasonable prices, suiting their budgetary constraints. Due to their excellent high durability, tensile strength and corrosion-resistance, these steel strips are widely used by our clients spread across the nation. The products offered by us include:


  • Stainless Steel Sheet
  • Coil
  • Plate
  • Strip Coil

Spring Steel Crca Annealed

Spring Steel Crca Annealed

C 55 grade Cold Rolled & Annealed Steel Strips

Composition: C: 0.5 - 0.60%
Mn: 0.5 - 0.90%
Si: 0.35% Max
S&P: 0.04% Max


Normally this grade is stocked in Annealed condition with 180 HV Max Hardness.

Strips can also be supplied in different temper in range of 200 – 350 HV on request, please check for Minimum economic batch, quantity & lead time.

These strips are available in stock from thickness ranging from 4.0 to 0.25 mm in widths of 250 - 350 mm, this can be slitted, decoiled and levelled as per the customer's request.

This grade is similar to following grades.

  • AISI 1055
  • CK 60 (DIN)
  • EN - 9 / CS 50 (BS)
  • MC - 12
  • JIS - S 50C & S 55C / Sup9
  • 55C6 of IS 2507 of 1975

These strips are supplied in bright finish & Sheared Edges suitable for bending & forming (refer bend test chart)

And then Heat treated for required Hardness.

This strip is widely used for making Springs, Washers, Spacers, Clips, Pins, insert etc.

Spring steel strips annealed
Cold rolled annealed spring steel strip
Hardened and Tempered Spring Steel Strip

Contact Us

Asian Steel Corporation
Mr. Wasim Ahmed (Proprietor)
Bharat Lokhand Bazaar, 1st Lane, Shop No. A - 5, Maulana Shaukat Ali Road, Near Two Tank, Opposite Kumbharwada
Mumbai - 400008, Maharashtra, India

Home  |  Profile  |  Our Products  |  Trade Offers (10)  |  Site Navigation  |   Contact Us

© Asian Steel Corporation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited