Hardness Standard

The mechanism is housed in a cast iron body to protect it from dust. The elevating screw is provided with protective bellow sleeves. Major loads of 60,100 and 150 KGF are constructed so that theses can be stacked only in proper progression. On one end of the load lever, the weight is applied gradually by means of a hydraulic dash pot. The force is transmitted by the load lever to the plunger and thereby to the test piece. The accuracy of the machine is guaranteed as per B.S. 891 : part I 2-1964.
Models:-
TRMAG: Manual weight selection with automatic zero adjustment of dial gauge.
TRBM: Manual weight selection with automatic zero setting dial gauge, and facility of Brinell testing.
TRBM-A1: Provided with automatic weight selection and automatic zero setting dial gauge, having 187.5 kgf weight for Brinell test.
TRBM-A2: With to additional weights of 187.5 KGF and 250 KGF for Brinell tests. A small pin having dia. 2mm can be tested as plunger is guided in a set of six bearings.
TRM-SF: Similar to TRBM-A2 in construction, but with manual weight selection. Useful for carrying Rockwell and Rockwell superficial Tests.

The Shore Hardness is defined as the resistance to penetration by an indentor of specified shape under a defined load.
Shore Hardness tester are available in various models for testing Vulcanized Rubber, Plastic, Ebonite, Fibre and all other soft and Hard Elastomers as per latest American Std ASTM-D 2240 and German Std DIN 53505.

Item Code: SHR-D-GOLD

ASKIB Engineers Pvt. Ltd. manufactures a wide variety of durometers for polymers, composites and like materials to measure hardness of natural and synthetic rubber products, acrylics, acetates, polymers, thermoplastics, PVC, hardboards, wood, fruits and many other non standard materials. 

Round type analog Durometers have a dial graduated from 0 to 100 spread across 360 degrees thereby making it easily readable and accurate in measured values.

The circular Durometers are provided with a maximum indicating hand for determination of creep properties of materials under test. The circular Durometer SHORE D is supplied with a unique 3-in-1 test gauge to check the accuracy of Durometers at 25,50 and 75 hardness nos.