Q-Mat Wall Hair Dryer

Product: qmat hair-cum-hand dryer
model: whhdss (wall mounted hair-cum-hand and feet dryer)
   ideal locations: starred, class hotels (each room). Better homes. Usp of this brand: hair should be dried in lo-flo, lo-temp air stream to minimise damage to hair and scalp. To ensure this, our brand has   controlled-heat, enough air-flow and a special temperature-resistant rubber hose to sustain long, leisurely, gentle & safe hair drying. A truly multi-functional, yet durable, dryer, perhaps in the whole world.

features:

• usage: as hair dryer. One-finger shift air-outlet to use as hand dryer.
• cover: fibreglass body with full mirror or stainless steel body, mirror  finish (so you don't need separate mirror). Ideal dressing table/  wash-basin accessory.

construction: fibreglass body, normally painted pearl white (other  colours on request). Air delivery gun (adg) made from teak wood- for safety & style. Internal items in powder-coated steel.

specifications:
a) configuration: downward air delivery. Flick for hand/ hair drying.
b) hands drying time: average 30 seconds.
c) hair drying time: 1- several minutes, depending.
d) air speed/quantity: 20 m/sec; 10 litres/sec. With adg: 17 m/sec; 8 litres/sec
e) temperature rise over ambient: for hand drying:100 degc. For safe hair drying: 70 degc
f) sound level: about 75 db at 12” from unit.
g) dimensions mm/(inches): 197(7. 8)d x 114(4. 5)w x 279(11)h
h) mounting height mm/in: (floor to dryer bottom) women- 990/39.
i) weight (kg): nett 5. 90
j) power: 220vac, 60cps, 1-phase 5. 5-a, rating-1210 watts.

special features:

• temperature-safe: auto-switch-off if motor jam or overheating.
• time-safe: auto-shut-off after pre-set duration of use. To continue,  withdraw hands/ reposition adg and restart.

price: inr, fob mumbai + vat. Cover in:
   model      fibreglass.      ss (mirror finish).
   whdg      rs 5,485/-     rs 7,336/-
   whdss     rs 6,850/-     rs 8,722/-
   whhdss   rs 8,470/-     rs 9,991/-

Product: qmat tissue paper dispenser

description: pull-out c-shaped tissue papers.

model: td-e

fabrications: fully in thick, 16g stainless for that straightness and high quality mirror finish. Matt finish also available. Ideal locations:  for all locations where people prefer a personalised approach to wiping hands. Since you cannot prevent littering you can at least contain it. It is, therefore,  recommended that you place a qmat auto-waste bin around to maintain a high level of ambient cleanliness. For classy offices, restaurants, hotels, hospitals etc.

specifications:

a) configuration: front lid opens to allow stacking requisite number of c-shaped tissues, folded portion facing down, into unit. (the fold ‘opens’ out for easy pulling by user). Push back
the cover and it snaps fit due to the dead weight locking pin.

b) model dimensions mm/(inches):                  weight (kg)
    td-e     252(10)w x 104(4)d x 381(15. 0)h         4. 5
    td-c     252(10)w x 104(4)d x 191( 7. 5)h         2. 5

c) tissue paper: use c-fold, 1- or 2-ply tissue paper but it should be of absorbent material yet crisp’n’strong to allow easy pull-out without tearing. Size (mm/inches): 204(8) x 76(3)

special features:

proper design to allow tissue to split ‘open’ for easy holding and pulling out by user.

price: inr, fob mumbai + vat.
model:           ss (mirror finish)                   ss (matt finish)
td-e              rs 3,970/-                             rs 3,673/-
td-c                 rs 2,782/-                             rs 2,485/-
tissue paper   1-ply      2-ply:pack of 100  on request

Product: qmat auto waste bin
description: foot pedal operated.
model: awb37
lid: lightweight aluminum, powder-coated for finish and durability. Can also be offered in stainless steel, on specific request only, at  no additional cost.

fabrications: fully in thick, 16g stainless steel for that straightness  and high quality mirror finish. Matt finish also available.

ideal locations: for all locations where people move about. You  cannot prevent people littering but you can contain it and maintain a high level of ambient cleanliness. For classy offices, factories, restaurants, hotels, hospitals etc, actually!

specifications:
a) configuration: removable polybag placed within unit, totally out of   view. Lid-cap to be disengaged & lifted for removing/ replacing polybag.

b) model    dimensions mm/(inches):             weight   polybag size
                                                                (kg)     (mm/inches)
   awb37   305(12)w x 356(14)d x 762(30)h      15
   awb22   229( 9)w x 279(11)d x 762(30)h       10
   awb10   152( 6)w x 203( 8)d x 762(30)h         7

special features:
recessed foot-pedal.

price: inr, fob mumbai + vat. Cover in:
   model ss (mirror finish) ss (matt finish) polybags(30 nos)
   awb37       rs 6,580/-       rs 5,707/-        on request
   awb22       rs 4,960/-       rs 4,312/-        on request
   awb10       rs 3,520/-       rs 2,908/-        on request.

Description: Using Dryer for Hair/Hand/ Feet drying.

Model: TR-WM (Twin Rail, well mounting). TR-FS (Twin Rail, free standing) SR-WM (Single rail, wall mounting)

Fabrication: In GI pipe & powder-coated. Also in stainless steel.

Ideal Locations: A must for swimming pools, spas, health clubs, etc. Ideal for canteens of modern offices, etc.

Specifications:

a) Configuration: Wall-Mounting/Free-Standing.

b) Ideally suited for following Hand Dryers: TR-WM and TB-PS, for model JAIR (Click). SR-WM, for model SLIR/COM (Click).

c) Operation: Balanced weight assembly. Simply slide up/ down to suitable height for selected operation.

- Top position for hair drying

- Mid position for hand drying

- Bottom position for feet drying.

Ask for On-Off or Tirner Switch to be fitted on (Hand) Dryer chosen, for easy operation.

d) Weight (kg): TR-WM, TR-FS, SR-WM,

Price: INR, fob Mumbai + VAT

TRWM (GI) TRWM (SS) Rs 3,970/- Rs 6,940/-

TRFS (GI, base MS) TRFS (SS) Rs 4,510/- Rs 7,570/- *

SRWM (GI) *SRWM (SS) Rs 2,260/- Rs 4,330/-

Legend:

TRWM - Twin Rail, Wall Mounted

GI- Galvanised Iron

SS- Stainless Steel

TRFS - Twin Rail, Floor Standing (Above for 'big dryers & for office/ hotel etc use)

SRWM - Single Rail, Wall Mounted

SRFS - Single Rail, Floor Standing (Above for low intensity use and smaller dryers like single blower/ compact models)

Description: Basin mounted, fully automatic.

Model: ATSL-C

Cover: Fabricated front thick, 16G, mirror finish stainless steel plate. Matt finish aHo on request.

Components: Fabrication, all stainless steel. Machining, from solid, extruded brass, heavy chrome plated.

Ideal Locations: A must for any Washbasin, domestic or commercial. Specially where public has routine access, e.g. Hotels, Restaurants, Hospitals, Offices etc.

Specifications:

a) Configuration: Specially designed infra-red sensing system, to operate effectively in both situations; from people wearing light to dark coloured clothing to wide variation in ambient lighting (except almost direct sunlight). The Electronic Box (even box in stainless toneSolenoid Valve and in-line water Hlter are all mounted out-of-sight' generally under the basin.

b) Operation: Dispenses water immediately the hands come in position. How remains on while hands in position.

c) Water Pressure: Minimum 0.5 her (about 7psig) max about 3 bar (about 42 psig).

d) Aerated Flow So that water does not splash even if water pressure is high.

e) Dimensions mmginches):

The Tap 57(2.2)w x 160(6.3)4 x 145(5.7)h The EBox 120(4.5)w x 120(4.5)0 X 38(2.5)h The S-Valve comes with buil-in by-pass lever. f) Power: Operates on 220 VAC, 60cps, 1-phase. normal, 2-pin socket. Negligible power consumption. Ensure power supply under basin.

Special Features:

(1) Misuse Safe: Water flow stops after 1-minute of continuous use. Need more? Withdraw hands and place under tap again.

(2) In-Line water Filter: Recommended. Included.

(3) Manual By-Pass: A lever at the Solenoid Valve allows you to get water directly, in vestal power failure with no back-up, defect in unit etc.

(4) Battery Backup: Provision for auto switch over to battery (chargeable, generally used in two -wheelers) and trickle charge during normal times (Battery not included)

5) In Kit form: Available; can be installed in-a-jiffy by any plumber/ electrician. Easy-to-follow, detailed, pictorial instructions, tools and plumber incentive included.

Price: INR, fob Mumbai + VAT.

SS (Mirror finish). 6,103/-

SS (Matt finish). Rs 6,544/- Rs 6,103/-

Description: Auto Tap Designer series, basin mounted.

Model: ATD2-B ATD1-B Twin (hot'n'cold) flow. Single flow.

Cover: Moulded ABS plastic. Also available in thick, 16G, mirror finish stainless steel plate. Matt finish on request

Components: Machinings- from stainless steel and solid, extruded brass, heavy chrome plated.

Ideal Locations: A must for any WashBasin, domestic or commercial. Specially where public has routine access, e.g. Hotels, Restaurants, Hospitals, Offices etc.

Specifications:

a) Configuration: Spec ally designed infra-red sensing system, to operate effectively in both situations; from people wearing light to dark coloured clothing to wide variation in ambient lighting (except almost direct sunlight). Solenoid Valve within unit. In-line water Filter (included) mounted under the basin.

b) Operation: Dispenses water immediately the hands come in position. Flow remains on while hands in position.

c) Water Pressure: Minimum 0.5 bar (about 7psig), max about 3 bar (about 42 psig).

d) Aerated Flow single stream, so that water does not splash even if water pressure is high. Or select shower flow.

e) Dimensions min/(inches): The Tap 112(4.4)w x 145(5.7)d x 220(8.7)h f) Power: Operates on 220 VAC, 60cps, 1-phase. normal, 2-pin socket. Negligible power consumption. Ensure power supply under basin.

Special Features:

(1) Misuse Safe: Water flow stops after 1-minute of continuous use. Need more? Withdraw hands and place under tap again.

(2) In-Line water Filter: Recommended. Included.

(3) Manual By-Pass: A lever at rear (of unit) allows you to get water directly, in case of power failure with no back-up, defect in unit etc. (4) Battery Backup: Provision for auto switch-over to battery (chargeable, generally used in two-wheelers) and trickle charge during normal times (Battery not included)

(5) In Kit form: Available; can be installed in-a-jiffy by any plumber/ electrician. Easy-to-follow, detailed, pictorial instructions, tools and plumber incentive included.

Price: INS, fob Mumbai + VAT.

ATD2-B, cover M ABS Plastic SS (Mirror finish) Rs 5,410/- Rs 6,544/-

ATD1-B, cover in ABS Plastic SS (Mirror finish) Rs 4,951/- Rs 6,103/-

OS (Matt finish). Rs 6,346/-

SS (Matt finish). Rs 5,851/-

Description: Makes existing manual taps automatic. Basin mounted, fully automatic.

Model: AT-C

Sensor Housing: From solid, extruded brass, heavy chrome plated.

Components: Fabrications- electronic box in stainless steel. Other machinings from extruded brass. Ideal Locations: A must for any WashBasin, domestic or commercial where convenience, hygiene and water saving is valued. Specially where public has routine access, e.g. Hotels, Restaurants, Hospitals, Offices etc.

Specifications:

a) Configuration: Specially designed Sensor Housing is fitted between the existing manual tap and the basin without any alterations in your system, just refitting! The infra-red sensing system is specially designed to operate effectively in both situations; from people wearing light to dark coloured clothing to wide variation in ambient lighting (except almost direct sunlight). The Electronic Box (even box in stainless steel), Solenoid valve and in-line water Filter are all monted'out-of-singh'generally under the basin.

b) Operation: Dispenses water immediately the hands come in position. Flow remains on while hands in position.

c) Water Pressure: Minimum 0.5 bar (about 7psig), max about 3 bar (about 42 psig).

d) Dimensions mm/(inches): Sensor Housing 75(3)dia x 25(1)h The E-Box 100(4.0)w x 65(2.5)d X 150(6.0)h The S-Valve

e) Power: Operates on 220 VAC, 60cps, 1-phase. normal 2-pin socket. Negligible power consumption. Ensure power supply under basin.

Special Features:

(1) Misuse Safe: Water flow stops after 1-minute of continuous use. Need more? Withdraw hands and place under tap again.

(2) In-Line water Filter: Recommended. Included.

(3) Manual By-Pass: A lever at the Solenoid Valve allows you to get water directly, in case of power failure with no back-up, defect in unit etc.

(4) Battery Backup: Provision for auto switch-over to battery (chargeable, generally used in two-wheelers) and trickle charge during normal times (Battery not included)

(5) In Kit form: Available; can be installed in-a-jiffy by any plumber/ electrician. Easy-to-follow, detailed, pictorial instructions, tools and plumber incentive included.

Price: INRs 4,564/-, fob Mumbai + VAT.

Description: Basin mounted, fully automatic.

Model: ATSL-C

Coven: Fabricated from thick, 16G, mirror finish stainless steel plate. Matt finish also on request.

Components: Fabrications- all stainless steel. Mach flings- from solid, extruded brass, heavy chrome plated.

Ideal Locations: A most for any WashBasin, domestic or commercial. Specially where public has routine access, e.g. Hotels, Restaurants, Hospitals, offices etc.

Specifications:

a) Configuration: Specially designed infra redsensing system, to operate orient vely in both situations; from people wearing light to dark coloured clothing to wide variation in ambient lighting (except almost direct sunlight). The Electronic Box (even box in stainless steel), Solenoid Valve ante-ire water Filter are all mounted 'out-of-sight' generally under the basin.

b) Operation: Dispenses water immediately the hands come in position. Flow remains on while hands in position.

c) Water Pressure: Minimum 0.5 bar (about 7psig) max about 3 bar (about 42 psig).

d) Aerated Flow: So that water does not splash even if water pressure is high.

e) Dimensions mm/(inches): The Tap 57(2.2)w x 160(6.3)d x 145(5.7)6 The E-Boo 120(4.5)w a 120(4.5)2 X 38(2.5)6 The S-Valve

f) Power: Operates on 220 VAC, 60cps, 1-phase. normal, 2-pin socket. NegligibM power consumption. Ensure power supply under basin.

Special Features:

(1) Misuse Safe: Water flow stops after 1-minute of continuous use. Need more, Withdraw hands and place under tap again.

(2) In-Line water Filter: Recommended. Included.

(3) Manual By-Pass: A Noe,- at the Solenoid have allows you to get water direct y, in case of power failure with no back-up, defect in unit etc.

(4) Battery Backup: Provision for auto switch-over to battery (chargeable, generally used in two wheelers) and trickle charge during normal times (Battery not included)

(5)100:0 form: Available; can be installed in-a-Jiffy by any plumber/ electrician. Easy-to-follow, detailed, pictorol instructions, tools and plumber incentive included.

Price: INS, fob Mumbai I. VAT.

Cover in: SS (Matt Finish). Rs 7,237/- Rs 6,544/