We offer high quality. These are used in:

These are suitable for handling medium to low risk organisms encounters in research investigation labs in all branches of medical, agriculture, pharmaceuticals & science.

Construction:

Basically constructed out of termite and insect resistant board. All exterior surfaces are covered with decorative laminates.

• Motor Blower assembly: Fitted on base of unit with balanced, direct drive, noiseless motor to provide adequate air flow volume over the entire surface of HEPA Filter with minimum level of vibration. The assembly is hanged from the top with four very strong springs to make the unit virtually vibration free.
  
• Double Filtration System: Laminar flow principle involves double filtration of air. Atmospheric air is drawn through prefilter and is made to pass through HEPA (High Efficiency Particular Air) Filter which is made of glass fibre having efficiency rating as high as 99.97% with DOP and retains air borne particles if size 0.3 micron & larger.
  
• Lighting:The fluoroscent light is fitted on top of work table to illuminate the entire work area
  
• U.V Germicidal Light: Also fitted on top of work table to make the work table bacteria free.
  
• Cock for Gas Air or Vacuum Line: Fitted on side panel of perpex sheet.
  
• Static Pressure inclined Manometer: Fitted on front of unit to check the level of pressure of air on HEPA Filter. During working when blower is started. It shows an increase to 100 mm, it shows that HEPA Filter has got choked and should be replaced.
  
• Exhaust System: The air collected in the lower chamber below the working top is exhausted through a strong blower passing through a HEPA FILTER of 300 mm * 300 mm * 150 mm to ensure bacteria free air exhaust.
  

For Specifications, please click on the image.

We offer Biosafety Cabinets. These are offered with the following uses & specifications:

Uses:

• It is suitable for handling medium to low risk organisms encountered in research investigation. Labs in all branches of Medical, Agriculture, Pharmaceuticals & Science.

Construction:

Basically constructed out of termite and insect resistant board. All exterior surfaces are covered with decorative laminates. The work table is made of laminated / S.S. top Side Panels and front door are made of thick plexi glass of special grade to resist the UV effect.

• Motor Blower Assembly: Fitted on base of unit with balanced, direct drive, noiseless motor to provide adequate air flow volume over the entire surface of HEPA Filter with minimum level of vibration.
  
• Double Filtration System: Laminar flow principle involves double filtration of air. Atmospheric air is drawn through prefilter and is made to pass through HEPA (High Efficiency Particular Air) Filter
  
• Lighting: The fluorescent light is fitted on top of work table to illuminate the entire work area.
  
• U.V. Germicidal Light: Also fitted on top of work table to make the work table bacteria free.
  
• Cock for Gas Air or Vacuum Line: Fitted on side panel of perpex sheet.
  
• Static Pressure Inclined Manometer: Fitted on front of unit to check the level of pressure of air on HEPA Filter. During working when blower is started. It shows an increase of 10 mm approx. in pressure. At the time when pressure increase to 10 mm, it shows that HEPA Filter has got choked and should be replaced.
  
• Exhaust System: The air is collected in the lower chamber below the working top is exhausted through a strong blower passing through a HEPA Filter of 300 mm x 150 mm to ensure bacteria free air exhaust. 70% of the air is recirculated and 30% of the air is exhausted.

For Specifications, please click on the image.

These are ideal for microbiological manipulation work with bioassays sterility testing & research work. Vial filling and bunching operation in parenteral units and for general dry processing work in semi conductor unit. It provides a comfortable 'Sit Down' working position for the operators.

Construction:

Basically constructed out of termite and insect resistant board. All exterior surfaces are covered with decorative laminates. The work table is made of laminated / S. S. top. Side panels and front door are made of thick plexiglass of special grade to resist the UV effect. Front door has a unique feature of double fold system. It can be half / full open during working. The entire unit rests on four castor wheels.

• Motor Blower assembly: Fitted on base of unit with balanced, direct drive, noiselss motor to provide adequate air flow volume over the entire surface of HEPA Filter with minimum level of vibration.
  
• Double Filtration System: Laminar Flow principle involves double filtration of air. Atmospheric air is drawn through prefilter and is made to pass through HEPA ( High Efficiency Particular Air) Filter which is made of glass fibre having efficiemcy rating as high as 99.97% with DOP and retains air borne particles of size 0.3 micron & larger.
  
• Lighting: The fluorescent light is fitted on top of work table to illuminate the entire work area.
  
• U.V Germicidal Light: Also fitted on top of work table to make the work table bacteria free.
  
• Cock for Gas Air or Vacuum Line: Fitted on side panel of perpex sheet.
  
• Static Pressure inclined Manometer: Fitted on front of unit to check the level of pressure of air on HEPA Filter. During working when blower is started. It shows an increase to 100 mm, it shows that HEPA Filter has got choked and should be replaced.

For Specifications, please click on the image.

We offer high quality B.O.D. Incubtors. These have the following features & specifications:

Use:

Ideal for research & development laboratories, industrial, medicine for biochemical's oxygen demand enzymatic, serum & sewage studies storage of heat sensitive vaccines, insulin lever extract pharmacy medicines, etc.

Construction:

Inner Chamber	Made of Aluminium / S.S. 304 grade
Outerside	Made of mild steel duly painted
Inside Door	Fitted with inbreakable transparent acrylic
Outer Door	Thick, Insulated, Powder Coated
Compressor Kirloskar / Shriram	Fitted with standard make
Circulating Fan	2 nos. fitted inside the chamber
Tray	3 nos. made of SS Wire. The trays can be adjusted anywhere ata distance of 4 cms
Temperature	Controlled by Digital Indicator cum Controller

These B.O.D. Incubators are completely made up of Stainless Steel. Associated Scientific Technologies have developed special model for pharmaceutical industries and clean rooms. The outer body is made of S.S. 304. The inner chamber is made of S.S 304. All screws and other parts are made of Stainless Steel.

For Specifications, please click on the image.

We offer High quality hot Air Ovens. These are offered with the following Uses & specifications:

Use:

Ideally suited for various application in ever growing field of medical, agricultural & industrial research for day to day heating, drying, sterilising, baking, etc.

Construction:

Inner Chamber	Made of Aluminium / S.S.
Outside Chamber	Made of mild steel sheet duly painted
Temperature Controller	Thermostat / Digital Controller / PID Controller
Door	Single with Glass for viewing without opening the door
Thermometer	L' shape (only in Thermostat Model)
Pilot Lamp	Two Nos.
Main Switch	Provided
Trays	2/3 as per size
Ventilation	Provided on both sides

Optional:

Air Circulating Fan Mechanical Timer of 2 hrs Digital Temperature Indicator cum Controller with Air Circulating Fan instead of-- Thermostat to provide temperature accuracy of ± 1 °C P.I.D. Controller to provide temperature accuracy of ± 0.5 °C.

For Specifications, please click on the image.

We offer quality Tissue Culture Racks. These are offered with the following uses & specifications:

Uses:

It is widely used in tissue culture lab to keep the plants under controlled illumination.

Construction:

Frame of Rack	Made of mild steel duly painted or Aluminium as desired
Plateform	Made of thick unbreakable plexi glass
Lighting	Through Fluorescent tubes controlled by electronic chokes fitted on side frame
Casto	Four Nos. of castor wheels provided for easy movability

For Specifications, please click on the image.

We offer high quality Animal Isolators. These are offered with the following Uses and Specifications:

Use:

The unit is useful to keep small animals in cages in a contamination free environment & to keep the laboratory environment safe from the contamination of the animal.

Construction:

Complete body made of stainless steel 304 with 4 shelves and eight see through doors. "The inlet air supply through prefilter, charcoal filter and Hepa filter. The motor assembly fitted on bottom of the unit". The exhaust air to the room through HEPA FILTERS, one at each shelf to ensure clean and bacteria free air in the laboratory.

For Specifications, please click on the image.