Astha Heat Tech.Astha Heat Tech.
Home Profile Our Products Contact Us Enquiry

Space HeatersImmersion HeatersBobbin Immersion HeatersCartridge Heaters
Tubular HeatersTubular/Finned Air HeatersMica & Ceramic Band HeatersAlkaline Heaters
Silica Chemical HeatersCasted HeatersPorcelain HeatersHeating Tapes
Electric Heaters

Our company works on the strategy of earning our client's faith and trust. With their satisfaction kept as the topmost priority, we ensure that our wide range of industrial heaters like space heaters, immersion heaters, cartridge heaters, tubular heaters, band heaters, mica band heaters, ceramic band heaters, alkaline heaters, bobbin immersion heaters, air heaters, tubular air heaters, finned air heaters, silica chemical heaters, casted heaters, porcelain heaters etc., to meet the exacting requirements of our clients. Further we also have the capability to manufacture customized variants of our products as per clients specific requirements. The range offered by us include:


Space Heaters
Space Heaters

The space heaters manufactured by us is self-contained, free standing air heating appliance that is used for installation in the space being heated and not intended for duct connections. This is mainly used as a supplemental room heating appliance.

There are mainly four types of space heaters:

  • Kerosene Space Heaters
  • Portable Electric Space Heaters
  • Gas Space Heaters
  • Wood Burning Heaters
Send Business Enquiry


Immersion Heaters
Immersion Heaters

Our range of immersion heaters are made to heat water, oil and chemical. Made from superior grade of copper, S.S.-316 and titanium pipe, these immersion heaters come fitted with M.S., brass and S.S. threaded flanges for better function ability.
Send Business Enquiry


Bobbin Immersion Heaters
Bobbin Immersion Heaters

Our range of bobbin immersion heaters are made by fully immersed application and side fitting purpose, these are rewire able and are made out of M.S., S.S. (304 & 316 Grade) in titanium pipe. Further the gold plating is done on quartz tube over 180 degrees. The superior designing features of our heaters reflect the radiant energy through the opening area only, thus improving element efficiency by as much as 20 % in comparison to those without gold plating.

Features:

  • It saves on energy costs.
  • Reflectors are often not needed.
  • Surrounding work area temperatures are cooler.
  • These heaters are also available with or without gold plating.
Send Business Enquiry


Cartridge Heaters
Cartridge Heaters

Our cartridge heaters are made out of stainless steel pipe and brass pipe in low and high watt density in regular and 'D' shape. Our high watt density cartridge heaters come in SS 304 & SS 316 construction and have a watt density of 12 watt / sq.cm. Apart from this, we also offer to our clients low watt density cartridge heaters in brass or SS 304 sheath with watt density of 4 watt /sq.cm. We also have the option of getting them manufactured with in-built thermocouple and different types of termination options as per the requirements of our clients.
Send Business Enquiry


Tubular Heaters
Tubular Heaters

Tubular heaters are the most versatile of all electric heating elements, capable of being formed into virtually any configuration to heat liquids, air, gases and surfaces. Tubular heaters are mounted through tank walls using standard pipe couplings and are available in various sizes, heat capacities and sheath materials for heating oil, water and chemical solutions.
Send Business Enquiry


Tubular/Finned Air Heaters
Tubular/Finned Air Heaters

Our range of tubular/finned air heaters are made out of stainless steel (304 & 321 Grade), and in incaloy pipe for higher temperature application with high grade magnesium oxide insulation powder. These tubular and finned heater also made in finned covers for better transmission of hot air. We ensure that they are the most versatile of all electric heating elements, capable of being formed into virtually any configuration to heat liquids, air, gases and surfaces. Mounted through tank walls using standard pipe couplings, they are available in various sizes, heat capacities and sheath materials for heating oil, water and chemical solutions.
Send Business Enquiry


Mica & Ceramic Band Heaters
Mica & Ceramic Band Heaters

These heaters are made in mica and ceramic insulation and made out of M.S, brass and S.S. sheet. Used in varied heating and cooling applications, the features of our products include:

Mica Band Heaters:
Offering them in MW quartz IR heating modules, the resistance wire of these heaters are enclosed in a small diameter quartz tube running parallel to each other and mounted in a special housing. Our IR heating modules half are available in different wattage's from 125 to 650 watt and IR heating modules full are available from 250 to 1000 watt.

Features:

  • Good radiant efficiency up to 80%.
  • Very rapid Heat-up, cool down time 30 to 60 seconds.
  • Watt density up to 40 watts / sq. inch.
  • Infrared wavelength Range from 2.5 to 3.0 m.
  • Lower power consumption.

Applications:
  • Thermo forming.
  • Plastic forming.
  • Shrink packaging tunnels.
  • Laminating.
  • Curing rubber.
  • Drying textiles.
  • Drying lacquers and paints.

Ceramic Band Heaters:
We offer to our clients short wave infrared heating module based ceramic band heaters. They are the ideal solution in the application on infrared heat technology. They save the user design costs and time and are substantially less expensive than complete infrared systems. These gold-coated single/twin tube short wave IR heaters are available with different type of terminations as per the requirement.
Send Business Enquiry


Alkaline Heaters
Alkaline Heaters

Our alkaline immersion heaters are made out of S.S. (304 & 316 grade) and titanium pipe, and are covered with lead. These short wave infrared heaters transfer heat directly in the form of electromagnetic rays, at a velocity of approximately 300,000 km / sec. Infrared heat is particularly economical on energy compared to other heat sources because it acts quickly, directly on product. IR is therefore not only the "fastest from of heat" but is also suitable for particularly demanding applications such as vacuum technology and clean room conditions. Short wave IR emitters are suitable for all applications, in which the attainment of high temperatures is required in the shortest possible time.

Applications:

  • PET perform heating in stretch blow molding machine.
  • Paint baking.
  • Rubber coating drying.
  • Soldering fusing in PCB industries.
  • Sterilizing / mirror coating drying in glass industries.
  • Printing ink drying in offset machine.
  • Powder coating curing.
  • Impregnation plants.
  • Paper coating drying.
  • All type of laminations.
  • Preheating prior to embossing.
  • Screen printing curing on T-shirt & textiles.

Standard range of Short Way IR Heaters:

Code Heat Length HL(mm) Overall Length OL (m) Wattage (W) Voltage (V)
SW 500 127 212 500 240
SW 1000 254 348 1000 240
SW 1600 S 406 500 1600 240
SW 1600 D 406 500 1600 415
SW 2000 S 508 626 2000 240
Send Business Enquiry


Silica Chemical Heaters
Silica Chemical Heaters

Silica chemical heaters consist of a helical wound resistance coil housed in a pure vitreous silica fused quartz tube. The Quartz tubing is terminated with specially designed ceramic insulating caps, which are securely fastened to the quartz tube with high temperature cement providing excellent support to the power connecting termination. Silica chemical heaters are designed to be used in a horizontal position only. Silica chemical heaters are available in various diameters like 8,10,12,15.19 mm & lengths from 300 to 1500 mm.
Send Business Enquiry


Casted Heaters
Casted Heaters

We offer to our clients superior range of casted deaters that are made to offer more durability and withstand higher temperature applications. They are used to heat dies and extruder's, casted in M.S., aluminum and brass.

Our range of band heaters include:

  • Casted Band Heater
  • Casted Plate Heaters
Send Business Enquiry


Porcelain Heaters
Porcelain Heaters

Subhot porcelain heaters are made out of high temperature bearing porcelain insulators, for higher wattage applications. Its superior designing and innovative manufacturing techniques enables our product to function better than other similar products available in the market. Further our extensive industry experience also enables us to offer its customized variants as per the requirements of our clients.
Send Business Enquiry


Heating Tapes
Heating Tapes

With its flexible design and high temperature control capability, this heating tapes is an ideal solutions for many industries. Some of features, include:

  • Available in flexible design.
  • High temperature.
  • used for efficient and fast direct contact heating of any surface and body.
  • Available with rapid thermal response.
  • mainly used for short runs.
  • Fitted with multi-stranded resistance wire.
  • Temperature control facility.
  • Available in various models.
  • Applicable for flow or viscosity control, freeze protection, condensation prevention and many more.
Send Business Enquiry



Member IndiaMART.comCopyright © Astha Heat Tech., All Rights Reserved (Terms of Use)
Developed by IndiaMART InterMESH Limited