These heaters are made in mica and ceramic insulation and made out of M.S, brass and S.S. sheet. Used in varied heating and cooling applications, the features of our products include:

Mica Band Heaters: Offering them in MW quartz IR heating modules, the resistance wire of these heaters are enclosed in a small diameter quartz tube running parallel to each other and mounted in a special housing. Our IR heating modules half are available in different wattage's from 125 to 650 watt and IR heating modules full are available from 250 to 1000 watt.

Features:

• Good radiant efficiency up to 80%.
• Very rapid Heat-up, cool down time 30 to 60 seconds.
• Watt density up to 40 watts / sq. inch.
• Infrared wavelength Range from 2.5 to 3.0 m.
• Lower power consumption.

Applications:

• Thermoforming.
• Plastic forming.
• Shrink packaging tunnels.
• Laminating.
• Curing rubber.
• Drying textiles.
• Drying lacquers and paints.

Ceramic Band Heaters: We offer to our clients short wave infrared heating module based ceramic band heaters. They are the ideal solution in the application on infrared heat technology. They save the user design costs and time and are substantially less expensive than complete infrared systems.

These gold-coated single/twin tube short wave IR heaters are available with different type of terminations as per the requirement.

Our alkaline immersion heaters are made out of S.S. (304 & 316 grade) and titanium pipe, and are covered with lead. These short wave infrared heaters transfer heat directly in the form of electromagnetic rays, at a velocity of approximately 300,000 km / sec.

Infrared heat is particularly economical on energy compared to other heat sources because it acts quickly, directly on product. IR is therefore not only the "fastest from of heat" but is also suitable for particularly demanding applications such as vacuum technology and clean room conditions.

Short wave IR emitters are suitable for all applications, in which the attainment of high temperatures is required in the shortest possible time. Some of the application areas of our product include:

Applications:

• PET perform heating in stretch blow molding machine.
• Paint baking.
• Rubber coating drying.
• Soldering fusing in PCB industries.
• Sterilizing / mirror coating drying in glass industries.
• Printing ink drying in offset machine.
• Powder coating curing.
• Impregnation plants.
• Paper coating drying.
• All type of laminations.
• Preheating prior to embossing.
• Screen printing curing on T-shirt & textiles.

Standard range of Short Way IR Heaters:

Code	Heat Length HL(mm)	Overall Length OL (m)	Wattage (W)	Voltage (V)
SW 500	127	212	500	240
SW 1000	254	348	1000	240
SW 1600 S	406	500	1600	240
SW 1600 D	406	500	1600	415
SW 2000 S	508	626	2000	240

Our range of Bobin Heaters are made by fully immersed application and side fitting purpose, these are rewire able and are made out of M.S., S.S. (304 & 316 Grade) in titanium pipe.

Further the gold plating is done on quartz tube over 180 degrees. The superior designing features of our heaters reflect the radiant energy through the opening area only, thus improving element efficiency by as much as 20 % in comparison to those without gold platings. Some of the salient features of our product include:

Features:

• It saves on energy costs.
• Reflectors are often not needed.
• Surrounding work area temperatures are cooler.
• These heaters are also available with or without gold plating.

Our cartridge heaters are made out of stainless steel pipe and brass pipe in low and high watt density in regular and 'D' shape.

Our high watt density cartridge heaters come in SS 304 & SS 316 construction and have a watt density of 12 watt / sq.cm. Apart from this, we also offer to our clients low watt density cartridge heaters in brass or SS 304 sheath with watt density of 4 watt /sq.cm.

We also have the option of getting them manufactured with in-built thermocouple and different types of termination options as per the requirements of our clients.

Our range of tubular/finned air heaters are made out of stainless steel (304 & 321 Grade), and in incaloy pipe for higher temperature application with high grade magnesium oxide insulation powder. These heater also made in finned covers for better transmission of hot air.

We ensure that they are the most versatile of all electric heating elements, capable of being formed into virtually any configuration to heat liquids, air, gases and surfaces. Mounted through tank walls using standard pipe couplings, they are available in various sizes, heat capacities and sheath materials for heating oil, water and chemical solutions.

Quartz Heaters consist of a helically wound resistance coil housed in a pure vitreous silica fused quartz tube. The Quartz tubing is terminated with specially designed ceramic insulating caps, which are securely fastened to the quartz tube with high temperature cement providing excellent support to the power connecting termination. Quartz Heaters are designed to be used in a horizontal position only. Quartz Heaters are available in various diameters like 8,10,12,15.19 mm & lengths from 300 to 1500 mm.

Tubular Air Heaters are the most versatile of all electric heating elements, capable of being formed into virtually any configuration to heat liquids, air, gases and surfaces. Immersion Heaters are mounted through tank walls using standard pipe couplings and are available in various sizes, heat capacities and sheath materials for heating oil, water and chemical solutions.

We offer to our clients superior range of Subhot Casted Heaters that are made to offer more durability and withstand higher temperature applications. They are used to heat dies and extruder's, casted in M.S., Aluminum and Brass. Our range of band heaters include:

• Casted Band Heater
• Casted Plate Heaters

Our range of immersion heaters are made to heat water, oil and chemical. Made from superior grade of copper, S.S.-316 and titanium pipe, they come fitted with M.S., brass and S.S. threaded flanges for better function ability.

Subhot Porcelain heaters are made out of high temperature bearing porcelain insulators, for higher wattage applications. Its superior designing and innovative manufacturing techniques enables our product to function better than other similar products available in the market. Further our extensive industry experience also enables us to offer its customized variants as per the requirements of our clients.

The space heater manufactured by us is self-contained, free standing air heating appliance that is used for installation in the space being heated and not intended for duct connections. This is mainly used as a supplemental room heating appliance. There are mainly four types of space heaters:

• Kerosene Space Heaters
• Portable Electric Space Heaters
• Gas Space Heaters
• Wood Burning Heaters

With its felxible design and high temperature control capability, this heating tapes is an ideal solutions for many indutries. Some of features, include:

• Available in flexible design.
• High temperature.
• used for efficient and fast direct contact heating of any surface and body.
• Available with rapid thermal response.
• mainly used for short runs.
• Fitted with multi-stranded resistance wire.
• Temperature control facility.
• Available in various models.
• Applicable for Flow or viscosity control, freeze protection, condensation prevention and many more.