Ringfit pipes are socketed on automatic online socketing machine with very high degree of accuracy. The socket has groove inside for rubber ring. The rubber ring ensures trouble free water tight joint with allowance to thermal expansion / contraction. One end of the pipe is plain and other end is self socketed with an integral groove to hold the rubber gasket. When joined with a rubber ring, the joint formed is a trouble free, water tight one, ready to take care of thermal expansion / contraction.
Available Size: 110 mm & 160 mm.
RINGFIT JOINING METHOD:
CUT PIPE: Cut pipes square,As joints are sealed at the base of the socket,An angled cut may result in joint failure.
REMOVE BURR AND BEVEL: Remove all burr from inside and outside of pipe with a knife-edge file, or deburring tool. Chamfer (bevel) the end of the pipe 10° – 15° CLEAN: Remove surface dirt, grease, or moisture with a clean dry cloth.
INSERT PIPE: Insert the pipe in to the socket without the seal ring and mark along the pipe, when it is fully interested.
FIX RUBBER RING: Fix the rubber ring in the groove without twisting it.
APPLY LUBRICANT: Apply jointing lubricant to the chamfered end of the pipe & on rubber ring up to the mark made on spigot or to the socket end of fitting.
JOIN PIPE AND FITTINGS: Push the pie firmly into the socket till the gap between they mark on the spigot and the socket is about 10 mm to allow thermal expansion.
Selfit pipes are socketed on automatic socketing machine with self socket length (without groove). Such pipes are to be joined with solvent cement. One end of the pipe is plain and the other end is self socketed on sophisticated automatic machines for high degree of accurate diameters. The pipes when joined using solvent cement, form a permanent water tight joint.
Available Size: 110 mm, 160 mm, 200 mm, 250 mm, 315 mm.
SOLVENT WELD JOINING METHOD:
CUT PIPE: Cut pipe square. As joints are sealed at the base of the sliding socket. An angled cut may result in joint failure.
REMOVE BURR AND BEVEL: Remove all burr from inside and outside of pipe with a knife-edge file, or deburring tool. Chamfer (bevel) the end of the pipe 10°–15°
CLEAN: Remove surface dirt, grease, or moisture with a clean dry cloth.
DRY FIT: With light pressure, pipe should go one third to one half of the way into the sliding socket. Pipes and Sockets that are too tight or too loose should not be used.
CEMENT: Apply a full even layer of cement to the outside of a pipe and medium layer of cement to the inside of a socket.
JOIN PIPE AND FITTINGS: Assemble pipe and socket till it contacts socket bottom. Hold pipe and socket together until the pipe does not back out. Remove excessive cement from the exterior. A properly made joint will show a continuous bead of cement around the perimeter.
(Type A & Type B as per IS 13592) Every pipe is socketed on automatic online socketing machine with very high degree of accuracy. The socket has groove inside for rubber ring. The rubber ring ensures trouble free water tight joint with allowance to thermal expansion / contraction. One end of the pipe is plain and other end is self socketed with an integral groove to hold the rubber gasket. When joined with a rubber ring, the joint formed is a trouble free, water tight one, ready to take care of thermal expansion / contraction.
Selfit pipes are socketed on automatic socketing machine with self socket length (without groove). Such pipes are to be joined with solvent cement. One end of the pipe is plain and the other end is self socketed on sophisticated automatic machines for high degree of accurate diameters. The pipes when joined using solvent cement, from a permanent water tight joint.
For contractors and builders looking for an easy-to-install, corrosion-resistant, cost-effective plumbing system underslab, there is now a better alternative. Astral introduces multi-layer cpvc/metal composite pipe known as flowguard® bendable.
there's nothing quite like it on the market today. Innovative flowguard® bendable composite pipe combines the corrosion-resistant benefits of cpvc with the flexibility and strength of aluminum in this one-of-a-kind, multi-layer pipe. Designed specifically for use under-slab, this new bendable piping system is significantly less expensive than type l copper.
consists of an inner layer of cpvc, a middle layer of butt-welded aluminum and an outsie layer of cpvc. All of the layers are bonded with an adhesive that has been proven by astm testing to withstand water temperatures up to 82°c (180°f). Assembly of the pipe incorporates an internal bushing and the standard astral cpvc fitting, along with the use of onestep solvent cement.
this kink-resistant system allows for long runs of potable water pipe to be bent and protrude through concrete with all joints made above grade. Its excellent combination of flexibilityand rigidity keeps the pipe workable, yet it stays in place. This unique combination results in reduced installation time which translates into a lower installed cost compared to other piping options.
available in ½” , ¾” and 1” dia. , it offers a straight professional appearance and does not require special cutting tools. It has been proven suitable even for continuous re-circulation, as its long-term pressure performance is neither affected by chlorine and other common water disinfectants nor adversely affected by uv exposure or age.
system benefits:
excellent combination of flexibility and rigidity allows the pipe to be workable yet hold shape
perfect replacement provided for metal pipes
extra toughness provided for aluminum middle layer
kink-resitant
proven reliability of solvent cement joint.
hanger spacing can be increased in overhead applications.
long-term pressure performance is not affected by chlorine or common water disinfectants
suitable for continous recirculation
long-term pressure bearing capability does not diminish with uv exposure or age
backed by lubrizol's 45 + years of expertise in cpvc piping systems
not permeable by trace amounts of common aromatic solvents that may be present in soil due to pesticide applications
Kalyani Petro Products Deals in exporting and manufacturing of pipeline pigs which includes customized pipeline pig, molded pipeline pigs, pipeline pig with polyurethane blades and industrial pipeline pigs.
Americo Metal & Alloys Exporter and supplier of alloy flange, nickel alloy flanges, pipe union, hexagon nipple, unequal tee, pipe tee, pipe elbow, 90 degree elbow, pipe coupling, full coupling, half coupling and pipe bushing.
Processing...
