We provide world class renowned Kaeser Screw Compressor & compressed air systems, representing 90 years of tradition and progress in the compressed air technology from COBURG Germany to the world over. Kaeser Screw Compressor offers wide range models

• Capacity - 10cfm to 3235cfm
• Discharge pressure - 3.5bar(g) to 15bar(g)
• Drive Motor rating - 2.2Kw to 450Kw
• Version - Air cooled & Water cooled

Salient features of Kaeser Screw Compressor:

• Sigma Profile - Developed and patented by Kaeser brings power saving compared with conventional screw air end rotor profiles.
• Kaeser compressor with 1:1 Drive - No Transmission loss, hence power efficient.
• It's Intelligent - Can operate to a preset standard and even be remote contrlled. This minimises supervision.

We provide high quality GEM cooling tower, which are of vertical induced draft counter flow design, ensuring uniform distribution of water and optimal transfer of heat. They are made of Fibre Reinforced Plastic(FRP) highly bonded with resin. Usage of FRP incorporates the product with features such as, high strength, chemical resistance, compatibility, part consolidation, incombustible, durability and exhibits good fatigue properties.
The tower casings are made of FRP and possess good structural strength to withstand high velocity winds. It is leak proof and hence avoids water spillage.
Other components included in this product are: Fill, Sprinkler, Nozzle, Axial Fan and motors, all of which are of high quality.
Our facilities include installation, service and maintenance of the cooling towers.

Our GEM cooling towers are used for applications such as:

• Diesel engine generators
• Induction furnace
• Air conditioning suppliers
• Plastic machinery

Dry Cooling Tower is an equipment which is used to cool and maintain the temperature of process hot water at a particular level. This operates on the principle of heat transfer by a heat exchanger with extended fins. The fan is driven by an electric motor.

Salient Features:-

• Conserve water & enhance Performance
• Reduces water consumption
• Eliminates algae/bacteria related problems
• Eliminates sewer charger
• Eliminates scale & corrosion
• Extend equipment life & reduce maintenance

Gem Dry Cooling Towers are widely used in many utility application viz. diesel generators, water cooled compressor, induction furnace, panel cooling, injection moulding, hydraulic power pack cooling etc.

We provide GEM make Compact Air Dryer, wall mounting type with twin non corrosive aluminium towers filled with desiccant Activated Alumina. Models available for capacities 10,15, 20 & 25 cfm and pressure 7bar to 12.5 barg.

Salient Features:-

• Compact wall mounting type
• Light weight & can be used for dedicated m/c's.
• Air quality achievable (-)40DegC atm Dew point as per ISO-8573-1, class 3-3-4
• Designed for efficient working with least pressure drop
• Dryer is fitted with pre after filter to protect desiccant from contamination, dust, scales etc.

Gem Compact Air Dryers are used in wide range of applications as:

• Painting
• Powder Coating
• Automobile service station
• Textile
• Machine Tools
• Pneumatic control
• CNC m/c's etc

Our refrigerator type air dryer is highly used in applications such as drying of plant air and other utility gases like hydrogen gas, nitrogen gas drying etc. These are available under brand name "Gem". They are most commonly used for moisture removal and to provide dry clean air for compressed air & pneumatic systems.

Some of the features of our products are:

• Highly energy efficient heat exchanger: reduces the power consumption.
• Advanced design to remove moist dirt and oil contamination.
• Highly tried and tested control systems.
• Low noise.

A voltage stabilizer is an electronic device able to deliver relatively constant output voltage while input voltage and load current changes over time.
We offer Voltage Stabilizers of "Servo" brand to our clients with following specifications:

• 3 phase-3 phase
• Power Rating: 5KVA TO 1OOKVA

We provide variable frequency drives which are also known as AC drive and it acts as reliable equipment for adjustments or to change the frequency of alternating currents applied to the electrical motor, thus aiding in its rotation speed regulation. VFD system is incorporated with a three phase induction motor, for higher reliability and better VFD performance.

Some of its other important parts are:

• VFD controller
• VFD operator interface

Our VFD systems are available in different voltage and current ratings.

Programmable Logic Controller (PLCs) are used in every modern industry for process automation. Where older automated systems would use hundreds & thousand of relays, a single PLC can be programmed as a replacement. The functionality of the PLC has evolved over the years to include capabilities beyond typical relay control: sophisticated motion control, process control, distributed control systems and complex networking have now been added to the PLC's list of functions.
We provide on the most advanced and up to date programmable logic controller, highly used in automation of industrial processes, such as control of machinery on factory assembly lines.

Some of the striking features of our PLCs are:

• Designed for multiple inputs and output arrangements
• Immune to electrical noises
• Resistant to vibration and impact
• Cost effective for controlling complex systems
• Flexible and can be reapplied to control other systems quickly and easily.
• More sophisticated control
• Easy programming and reduces downtime
• Fitted with reliable components

Our PLCs makes the remote monitoring and control via digital computer networks a very easy one.

We provide quality On-Line UPS systems of India's No.1 UPS manufacturer, "Numeric Power System Ltd." with very wide range from 1KVA to 4800KVA and with widest service network, 950 Service Engineers and 24x7 service policy.
The services offered includes UPS capacity assessment & sizing, installation, testing & commissioning, customer training, extended warranty support, maintenance contract, 24hrs deputation of engineer at site, harmonic study & solutions, turn-key project management etc.

Features:

• Advanced Digital Signal Processor (DSP) / Microprocessor based design
• SPWM Technology with IGBTs
• Wide Input Voltage Range
• Active Power Factor Correction
• High Efficiency
• Compact Design to suit the interiors
• SNMP Interface
• Web enabled monitoring
• Parallel Redundant Configuration

We provide GEM make Auto Drain Valve which are designed to drain sludge and rust laden condensate from compressed air system. These are most suitable for compressors, after coolers, air receivers, dryers, driplegs, moisture separators etc.
Gem offers different type of Auto Drain Valves viz. small compact EZ series for general application, GDV series for low & high discharge condensate. No air loss type drain valve from energy saving aspect.

We offer our clients energy saving motor controller of "POWERBOSS" make. These are highly efficient and increases the life of motor. Our range can be made available as per the requirements.