Atlas Machines (India)
Atlas Machines (India)


Grinding Machines

We hold expertise in offering a comprehensive range of Grinding Machines, which is specially designed to serve the purpose of through feed and in-feed grinding.

 

  • Available In: Horizontal & Vertical Models
  • Ranging From: 450 mm to 1500 mm(L) x 150 mm to 500 mm(W)



Cylindrical Grinder

The Universal Cylindrical Grinding Machine ideally suited to performing repetitive grinding operations or small quantity reduction with equal ease. Features of our existing range of machines. All models have hydraulic and mechanical able traverse. Wheel Head rapid approach for the operating conveniently. In all models variable speed of work head and internal grinding spindles facilities are available if required on all models. We use antifriction turcite "B" slid-way material on the slides in all our models. Hand - operated lubricants pump for sufficient lubrication of slides. Surface finish 2 microns (improved values can be obtained by using selected grades of grinding wheel applicable to material to be ground).

Standard Attachments :

A coolant pump fitted on a tank, Diamond Dresser 2 nos., Oil can, Dead Center 2 nos., Tool kit.

 

Additional Attachment Extra Cost :


Internal Grinding Attachment, Balancing Stand, Balancing Mandrel, Three Points Steady Rest, Two points Steady Rest, Radius Truing Device, Spare wheel Flange, Independent Four Jaws Chuck, Magnetic Coolant Pump, Grinding Gauge.

 

Specifications:


Dimensions 305-455 600-800 1000 1250 1500-2000
Table Swivel 9+3 9+3 6+3 6+3 6+3
Centre Height 130 mm 130 mm 150 mm 155 mm 220 mm


Horizontal Rotary Surface Grinder (600 Mm Dia)

Standard Equipments :


  • Grinding Wheel
  • Electric motors 440 volts 3 Phase
  • V-belt
  • Starter
  • Guard for grinding wheel & motors
  • Magentic Chuck

 

Specifications:


  Inch MM
Take Size Overall 12" 300
Working Surface of Table 20" 500
Grinding Face Capacity 20" 50
Vertical Movement of Wheel Head Slide 9" 225
Maximum Height from Rotary Table to Grinding Wheel 12" 300
Cross Traverse Movement to Grinding Wheel Head 10" 250
Grinding Wheel 12" X 1" X 1" 300 X 25 X 25
Spindle Speed 2800 RPM  
Total Length of the Grinding Wheel Head Slide 31" 775
Total Length of the Grinding Wheel Width 9" 225


Centerless Grinders

Specifications
Model AMI- 1 AMI- 2 AMI- 3
Maximum Grinding Diameter 75 mm 75 mm 125 mm
Minimum Grinding Diameter Min. 1 mm 1.5 mm
Maxi. included angle for taperwork (Without using forming attachment) 5 deg. 5 deg. 5 deg.
Speed of grinding wheel R. P M. 1600 1800 1250
Number of speeds of Control wheel 3 3 3
Diameter of grinding wheel 350 mm 350 mm 350 mm
Maximum Width of grinding wheel 100 mm 100 mm 150 mm
Diameter of hole in grinding wheel 125 mm 150 mm 300 mm
Diameter of control wheel 230 mm 230 mm 300 mm
Maximum width of control wheel 100 mm 100 mm 150 mm
Diameter of hole in grinding wheel 75 mm 75 mm 125 mm
H.P. of motor for wheel head 5 H. P. 7.5 H. P. 15 H. P .
H.P. of motor for control wheel 3/4 H.P. 10 H. P. 2 H. P.
Speed of motors RPM 1440 1440 1440
Floor space for machine 30" X 40" 30" X 40" 43" X 65"
Approximate weight 1600 Kgs. 1650 Kgs. 2600 Kgs.


Mechanical Wheel Type With Auto Feed Surface Grinder

Specifications
Wheel Type With Auto Feed (mm Head Movement mm)
Table Size Overall 965 x 210 910 x 280
Working Surface Table 525 x 205 650 x 260
Grinding Capacity 500 x 200 600 x 250
Cross Traverse 215 275
Vertical Traverse 305 305
Maximum Height From Table To Wheel 254 254
Grinding Wheel 203 x 17.5 x 25.4
Cross Feed Graduation 0.01 0.01
Vertical Feed Graduation 0.02 0.02
Spindle Speed 2800 RPM 2800 RPM
Electric Motor For Grinding Wheel 1 HP 2800 RPM 1 HP 2800 RPM
Electric Motor For Table Feed Automatic 1 HP 1400 RPM 1 HP 1400 RPM
Net Weight 900 kgs. 1000 kgs.
Gross Weight 1100 kgs. 1200 kgs.


Horizontal Hydraulic Surface Grinder

Heavy Duty - robust base structure & slide with excellent rigidity and capable to handle heavy jobs.

 

Column & Vertical Slide- Both Guide ways are ground finished for high rigidity & z- axis accuracy.

 

Oil Lubrication - Magnet slide is immersed in oil bath and all other parts lubricated with centralized lubrication pump.

 

Wheel Head - Spindle is mounted on a rigidly constructed spindle housing which runs on preloaded super precision anti friction imported bearings which are grease packed for long life. Direct drive by flange mounted motor eliminate the vibration

.

Micro Feed - The vertical feed movements are equipped with MICRO FEED upto 0.002 mm

 

Electric Control Panel - having L & T / TC Contractors, AGI, Rotary switch and soft touch push buttons.


Vertical Rotary Surface Grinder

Standard Equipments : 


Diamond Tool Holder, Grinding Cup wheel, Electric Motors with Penel Board & Coolant Pump, Table Guards.

Extra Equipments:

Magnet Chuck 24" OR 26" OR 28" Diamond Tool Spare wheel Grinding.

 

Specifications


Table Dia 750 m.m.
Grinding capacity 700 m.m.
Distance between table to Grinding wheel 400 m.m.
Segmental wheel Dia 400 m.m.
Range of Variable table speeds three speeds 1, 2, 3 R.P.M.
Vertical feed Graduation .02 m.m.
Head Motor 10 H.P.
Head Motor Revolution 1440 R.P.M.
Feed Motor 2 H.P.
Coolant Pump 0.1 H.P.
Rapid Motor 1 H.P.
Floor Space 1500 x 1200


Horizontal Surface Grinder

Specifications
Wheel Type With Hand Feed
Table Size Overall 790 x 203 965 x 203
Working Surface Table 460 x 203 560 x 203
Grinding Capacity 400 x 203 560 x 203
Cross Traverse 178 200
Vertical Traverse 305 305
Maximum Height From Table To Wheel 254 254
Grinding Wheel 203 x 19.5 x 25.4  
Cross Feed Graduation 0.01 0.01
Vertical Feed Graduation 0.02 0.02
Spindle Speed 2800 RPM 2800 RPM
Electric Motor For Grinding Wheel 1400 RPM 1 HP 1400 RPM
Electric Motor For Table Feed Automatic
Net Weight 500 kgs. 900 kgs.
Gross Weight 600 kgs. 1100 kgs.


Cup Wheel Type Surface Grinder

Specifications
Model AMI 80 AMI 87
Working Surface Of Table 500 x 150 mm 600 x 200 mm
Grinding Capacity 500 x 150 mm 600 x 200 mm
Longitudinal Movement Of Table 559 mm 650 mm
Vertical Movement Of Table 305 mm 305 mm
Max. Height Of Table To Wheel 254 mm 254 mm
Traverse Movement Of Grinding Wheel -- --
Size Of Grinding Wheel 15 mm dia 200 mm dia
No. Of T-Slots In Table 1 No. x 14 mm 1 No. x 14 mm
Max. Cross Traverse 150 mm 228 mm
Power Required .75 K.W. 1.5 K.W.
Spindle Feed hand hand
R.P.M. Required 1440 1440
Net Weight 600 Kgs. 800 Kgs.


Tool & Cutter Grinder

The Universal Tool & Cutter Grinder is a robust machine capable of dealing with a wide range of tool & cutter Grinder operations. It is available as a steel cabinet mounted, machine and is designed for the rapid sharpening of H.S.S. milling cutters, spiral mills, metal slitting saws side and face cutters reamers, tap and with suitable attachments lathe tools, end mills formed cutters etc.

A totally enclosed wheel head motor with a double ended spindle carriers one standard and one extended wheel adaptor which can be mounted on either end and will receive both the Cup and dish wheels supplied with the machine. The spindle, with runs at 2800 r.p.m. is controlled by reversing switch built into the main body of the machine. The wheel head is mounted on an engraved base plate which can swivel through 360 D and can be clamped in any position. It is supported by a cast iron column having vertical adjustment, by means of a hand-wheel at the base of the machine. The column can be looked in any position and movement can be accurately controlled by means of a friction mounted micrometer dial.

The upper work table is provided with the slot which not only serves as means of fixing the tooth rest etc. but also enables accurate location of the loose centre heads. It is graduated either side of the Zero setting and can swivel through 180 D Provision is also made for taper setting in INCHES per FOOT. Longitudinal movement of the table is obtained from a rack pinion operated by a conveniently placed Handle or, if required, can be operated by hand pressure only. The table is located on accurately machined vee and flat ways and is fitted with adjustable stops which can limit he movement of the table in and position. Cross traverse is accurately controlled by a hand wheel situated at the front of the machine which is fitted with a friction mounted micrometer dial.


Heavy Duty Pedestal



Extremely robust in design, suitable for all heavy duty jobs in modern foundries, factories and Engineering Workshops.

Pedestal Body - Made of Heavy duty selected cast iron with attracting appearance, Inherent features of design, quality of material and methods of modern manufacturing techniques combine to ensure maximum strength, accuracy and reliability with motor enclosed in the body which is readily accessible.

Spindle
- is of large diameter, mounted on Heavy Duty Ball bearings. The spindle bearings and motor bearings are greased adequately before despatch and need only replenishing at intervals.

Grinding Wheels
- Coarse/medium/fine of Carborundum or Grindwell make.

MODEL 10 12 14 16 18 20 24 30 40
Dia 250 300 350 400 450 500 600 750 1000
Width 25 38 50 50 76 76 76 101 101
Bore 25.4 25.4 38.1 38.1 152.4 152.4 203.2 304.8 406.4
Centre Distance 600 625 650 765 840 840 920 1025 1500
                   
Spindle                  
Centre height 910 910 910 860 860 860 860 810 810
R.P.M. 2800 1500 1500 1500 1500 1450 1200 950 500
                   
Electric Motor                  
H.P. 3 Phase 1 2 2 3 5 5 7.5 10 20


Knife Grinding Machine

Specifications
Model Clearance Grinding Width Width Of Table Cast Iron Grinding Motors(H.P.)        
AMI - 60 5" 6" 8" 5 H. P.
Export       1 H. P.
AMI - 72 5" 6" 8" 5 H. P.  
Export       1 H. P.
AMI - 84 6" 8" 8" 7.5 H. P.
Export       1 H. P.
AMI - 110 6" 8" 8" 7.5 H. P.
Export       1 H. P.
AMI - 120 6" 10" 8" 10 H. P.
Export       2 H. P.


Rod Polishing Machine Through Abrasive Belt

Rod Polishing Machine Through Abrasive Belt 75 MM X 2000 MM with Automatic Feeder

Size and Specification as requested by the client.


Centreless Type Abrasive Grinding & Polishing Machine

Centreless Type Abrasive Grinding & Polishing Machine


Centreless Type Buffing & Polishing Machine

Size and Specification as requested by the client.


Pedestal Grinder With Coolant & Fittings

Pedestal Grinder With Coolant & Fittings

Pedestal grinder with coolant & fittings.




Contact Us

Atlas Machines (India)
Mr. Gurpreet Singh Soni
No. 20, Ambalal Doshi Marg, Hamam Street, Fort
Mumbai - 400 001, Maharashtra, India



Home  |  Profile  |  Our Products  |  Trade Offers (20)  |  Site Navigation  |   Contact Us

© Atlas Machines (India). All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited