Rapid approch-adj. Feed-Adj.Dwell-Rapid Return of quill auto by hydraulics
De clamping automatically
Cycle complete
Modular construction
Machine construction is Modular and all the modules are interchangable with any of similar module
Machines are available with infinately variable feeds (within the range)
Machine with VFD is available with infinate no of spindle speeds and feeds (within the range) makes it versatile for all kind of jobs within capacity of the machine
Machine is equiped with comprehensive control panel and ASLC for automation
Man machine interfase with dignostic messages for easy maintanance
Hydraulic Lines can be provided with inbuilt logic in controller, ( optional ) for Job
clamping purpose, if clamping cylinders are available on fixture.
Within the capacity of the machine any no.of spindles can be used with the help of fixed center distance multi Drill / Tap unit (Optinal)
For different Jobs same machine can be used within its capacity with change in multi drill and Drill stand only
Multidrill stand can be very easily changed on the machine by the operator
Standard Accessories
Fabricated Base
Fabricated column
Head slide Unit
Self Feed Unit
Hyd P.Pack
Control Panel
Anti Vibration Pads
Drive Unit
Coolant System
VFD
C.Lubrication System
Extra accessories
WPC
FMD
Multi Drill Stand
Flexible Lighting arrangement
Centralised Lubrication System (In Lieu of standard)
When the ratio (L/D) is more than 3, the operation is called as 'Deep-hole drilling' A drilling operation with L/D ration 3o is also possible within our manufacturing range. Wood-pecking cycle, high pressure-chilled coolant, slide feed units these are some of the basic features of the units.
These are line production models, where different drilling/ tapping machines are mounted on a common base. Depending upon no of mounted heads, the machine can be categorized as GDM-II, GDM-III and GDM- IV. Various combination are possible as per customer requirements.
Sr No
Specifications
Unit
HLA 120
1
Drilling Capacity
MM
Dia 16
2
Spindle Taper
Morse
MT2
3
Spindle Travel
MM
100
4
Spindle Speed
RPM
470-1750
5
No.of Speeds
Unit
4
6
Swing
Degrees
360
7
Column Diameter
MM
80
8
Motor
HP
1
Features
The automatic feed drilling operation is driven by hollow clutch gear Thre Grauted coller for depth control is satin finish plated for attrective apppearance. Automatic feed drilling performance.Inbuilt safety clutch arrangment. Four Feeds( 0.05, 0.1, 0.15 & 0.2)
Standard Accessories
Instruction Manual V Belts induction Motor, 3phase,50 Hz, 4Pole
These are special purpose fully automatic machines for Linear Indexing Drill and Tap at two different stations. The job is indexed linearly between Linear Indexing Drill and Tap stations. Multi-spindle Linear Indexing Drill and Tap is also possible. These are designed for working simultaneously with CNC machining center. Same operator can operate both the machines thereby substituting some costly CNC operations.
Sr No
Specifications
Unit
HLA 120
1
Drilling Capacity
MM
Dia 16
2
Spindle Taper
Morse
MT2
3
Spindle Travel
MM
100
4
Spindle Speed
RPM
470-1750
5
No.of Speeds
Unit
4
6
Swing
Degrees
360
7
Column Diameter
MM
80
8
Motor
HP
1
Features
The automatic feed drilling operation is driven by hollow clutch gear
Thre Grauted coller for depth control is satin finish plated for attrective apppearance.
Intermidiate Table with Rack and Pinion arrangment for lifting & lowering of work table induction Motor, 3phase,50 Hz, 4Pole
Optional Accessories
Drill Drift
Drill Chuck( keyed)
Coolant system consisting of reservoir tank with chip collection tray seperation baffles, electric coolant motor, on/off switch, flexible piping & fittings, on/off valves etc.
Pitch circle drilling/tapping machine is basically to drill no of holes on a pitch circle diameter. This is fully automatic machine which drills one hole at a time but the cycle is completed when no of predecided (equi-spaced) holes are drilled. This is achieved by indexing a job as per programmed indexing. The machine is very useful for a batch quantity jobs.
The Turret drilling machine is simple machine like any other drill press. One set up can do 6 operations as
centring,drilling, holemilling, reaming, chamfering, tapping etc.
Saves time of moving components through different set ups for verious operations.With a Turret drilling machine you bring 6 spindles to work piece rather than moving the work piece to 6 spindles.
Indexes turret head automatically by Geneva Index mechanism. Turret drilling machine indexes to the centerline of the hole and hence delivers accurate,concentric, uniform machined components without using drill bushes and expensive fixtures.Turret is better option for Gang drilling Machine.
high production rate with component shaving multiple operations at one position.The Turret drilling with its 6 spindles costs less per spindle than 6 individual drilling machines and 6 operators.
Turret especially suits small and medium batches of components.it is ideal for taking inappropriate work off expensive Machining Centres.
Machines can be equippedby XY coordinate tables, rotary Indexing Table or combination of both.
These machines are highly productive machines as no. of spindles working at a time are more. Axillary spindle configuration is as per the customers' requirement. This configuration can be changed by changing the cluster plate or sometimes total multi-drill stand (inclusive of multi-spindle, guide-bar arrangement, movable zig plate and fixture) needs to be replaced. Maximum 24 axillary spindles are available.
Specially designed motors with Fclass insulation and temprature sensors embeded in the winding
Automatic tapping driven by gear pair provides accurate thread and consistent quality level.
Easy replacment of gear pair for different pitches, fitted externally.
No Pulling force on component during tapping.
In case of spindle overload safety mechanisum is provided
Tapping cycle; Tap forward-depth-dwell- Tap reverse to home.
Microw Switch controls the depth of tapping and reversal of the motor, providing maximum operationalconvenience.
Standard Accessories
Reputed make specially designed main motor,with special class of insulation,duly assembled with all drive elements
Temperature sensors are provided in motor winding to sense the winding temperature.
This device switches off the panels/operating pendent with all safety elements and ASLC for automation duly wired to the basic machine.( where ever applicable)
Leveling screw arrangment( Where ever applicable)
Operation and maintaince Manual
Optional Accessories
Variable Frequency Drive for main spindle infinite speed variation within the range.
Wood -peaking cycle for deep hole tapping.
Multi spindle tap heads available.
Guide Bar Arrangment.
Component clamping fixture as per the application.
a variable-frequency drive (vfd) is a system for controlling the rotational speed of an ac electric motor by controlling the frequency of the electrical power supplied to the motor.
Rising Industries Engaged in supplying, exporting and manufacturing a wide range of drill machine, drilling equipments, radial drilling machines, industrial drill machine and vertical drill machine in Kolkata, West Bengal.
Processing...
