Auto Yarn

While compression springs are the least expensive coil spring to produce they are also the most durable form of coil spring available. Compression springs are designed to resist linear compressing forces or pushing forces.

The ends can be ground flat so that force is applied squarely to each end of the spring, reducing the tendency to buckle, or to accommodate accurate seating requirements and a reduced solid height that may be imposed by particular applications.

We can produce a wide variety of compression springs in a large range of shapes and sizes to meet your specifications.

Advantage of Metal Dye springs
 Recycling of Dye Springs lowers cost of support.
 Elimination of spacers increases productivity.
 Uniform Yarn column improved dyeing evenness.
 50 % more open area improves dye liquor flow.
 
The Versatile Dye Springs
 Can be soft wound on all winders, auto corners and     open end spinners.
 Compatible with all texturising & twisting machines.
 Can be used with all high frequency, pressure & rapid     dryers.
 Unwind to the last layer, reducing wastage.   
 
Accessories like Mandrels, Stockinet’s etc. can be organised.
 
Product Offering
 
 Dye springs from both AISI 304 & 316 stainless steel.
 Diameter from 32mm to 71mm.
 Length ranging from 17cm to 100cm.
 Regular, Turbo, Hydro & Radically Compressible versions.
 Special add-ons like coding, Sandblasting etc.,
 Higher dimensional & Weight Consistency.
 Short delivery lead time.

Tension springs are commonly attached at both ends to other components and are used to create resistance against linier tensioning forces or pulling forces. These springs can be supplied with open hooks, closed eyes or various other forms of attachment on the ends and they can normally be made complete on a CNC spring forming machine.

The weakest point of a Tension spring is where the body of the spring forms into the hook or eye; however there are several design methods that we can employ to resolve this issue, ensuring high quality Tension springs to meet your demands.

Torsion springs are designed to resist twist or rotationally applied force, they have a body of coils with “legs” that are commonly attached to other components that exert torque when rotated around the spring. Torsion springs can store and release energy or they can statically hold a mechanism in position by deflecting the legs from the body’s axis.

A torsion spring applies an opposing force to push adjoining components back to their original position. Various “leg” configurations are available from straight to hook ends and Torsion spring ends can be bent, looped, twisted or hooked to specification. We can produce long life Torsion springs for use in.

We can produce an infinite array of wire forms to suit many applications. We can also drill, weld, thread, chamfer, swage and flatten wire where required. Send us your ideas and we will help with design and supply you with a quotation.

We are currently supplying products to a number of industries including hardware lines, valves and electric metering. We work closely with toolmakers and plastic manufacturers to achieve high quality mouldings for component. We also supply electrical and electronic products to suit your requirements.