Automac Engineering, Mumbai

Some of the features of our instant fittings are as follows:
Connecting:
Cut the tube for required length by tube cutter and push the tube on the core of the fitting and tighten the nut by hand.
Disconnecting:
Louse the nut and pull tube out.
No Tools Needed for Tubing Installation
No wrenches, haring tools, benders or other tools are used for tube installation.
Reduce Installation time and Labor cost
Instant fittings offer a minimum of 40% saving in installation time, compared to regular compression type fitting.
Excellent Holding Power:
The instant fittings when assembled finger tight on polyurethane or polyurethane of PVC tubing will hold the burst pressure of the tubing itself.
Pipe Swivel Possible:
By loosing nut slightly pipe can be swivel on its own by 360°as per required direction.
Material:
Elbows and Tees : Brass forging (as per B.S. 218) Aluminum/ Acetal Copolymer (Celcon). Connectors : Union/Female Studs : Stess relieved brass bar stock (as per BS 249) Aluminum/Acetal copolymer (Celcon).
Pipe Thread:
British standard pipe threads (parallel). Also available mm threads on 4mm OD tube fittings.
Operating Medium:
Compressed air, light gases, water, lubricating oil.
Working Pressure:
Vacuum to 10 Bar (Depend upon bursting pressure of tube)
Working Temperature:
-10°C To + 45°C (for Polyethylene tubing)
-10°C To + 60°C (for Polyethylene tubing)
-10°C To + 80°C (for Polyethylene tubing)