Automotive Solutions, Delhi
Protection Coatings

We offer a wide range of products such as: Spray Booth Filters, Masking Paper, Foils & Tapes, High Solid 2k Primer and Thinners. We also provide technical assistance & application to our clients for epoxy floor coatings and epoxy waterproofing solutions on turnkey basis.


Epoxy Floorings
Click here to Zoom Image
Epoxy Floorings
Epoxy Coatings have outstanding chemical resistance, durability, low porosity and strong bond strength. Hence, it is applied on floors to save it from wear and chemicals. Epoxy is a thermosetting resin, which is used in adhesives, coatings and laminates to provide decorative texture and appearance to the surface.

Epoxies are coated with latex or urethane that help it to retain its color and gloss. Epoxies gets harden in few minutes or hours. Epoxies has an excellent adhesion with most substrates. But the complete hardening generally takes several days. Epoxy products generate three dimensional networks of molecules that provide rigidity, hardness and inability to re flow. It can handle temperatures between 0ºF and 140ºF. The epoxy thickness is decided on the density of traffic. If the traffic density is more, higher content material of epoxy is required. These products generally exhibit:
• Excellent electrical properties
• Good adhesion due to presence of polar groups
• Low shrinkage
• Good impact resistance
• Moisture resistance
• Chemical resistance - NaOH & HNO3 solution
• Resistance to cutting oil ILOCUT334

10 reasons why one should use epoxy flooring

1) The epoxy flooring has strong adhesive properties.
2) They resist chemicals.
3) They are quite durable.
4) Epoxy flooring does not shrink.
5) The epoxy flooring is water resistant.
6) The flooring is quite tough.
7) They are quite easy to use.
8) Epoxy flooring is non inflammable which cuts down the risk of fire.
9) They resist dirt and dust which makes them quite easy to clean.
10) The application of the epoxy flooring is quite inexpensive and economical.

We offer superior quality epoxy products that offer solid performance as compared to other epoxy coatings. Our products are tried and tested as per international quality standards laid down by automotive solutions.

Our products are helpful in transforming hard-to-clean concrete floor and walls into easy-to-maintain water proof surfaces. In addition, these products come with a wide variety of attractive colours with state-of-the-art protective systems.

Catalogue available on demand
Ask for Quote


Wall Coatings
Item Code: AS-WC

AS Wall Coatings In PU / Epoxy Sutiable for industrial application like pharma, clean room , hospital ,Operation Theatre , Food Industry Etc.  These coatings can be done directly on concrete or your exsisiting paint finish. Long Lasting , Lead Free , Seamless Wall Coatings.

Desired colors available on request.

Wall Coatings
Click here to Zoom Image
Ask for Quote


Waterproofing Solutions
Click here to Zoom Image
Waterproofing Solutions
Deterioration of structures due to seepage and leakage is a major problem prevalent through out the country.  Dampness in buildings, caused by the ingress of moisture through its components, not only shortens its life span but also creates unhygienic conditions for the occupants.  Besides, it involves expensive repairs for rectification.  Thus, it is imperative that this burning issue gets utmost attention of the Engineers and Builders and is tackled effectively on ground.  Hence, the age-old dictum of “Prevention is Better than Cure” aptly applies here.  The need of the hour, therefore, is to evolve economical solution to this vexed problem.  To overcome the same, we at Automotive Solutions have launched an product named ‘AS BOND which has been effectively used for New Construction right from Construction Stage onwards (Basement, Foundation, DPC, Jointed concealed water pipes and soil pipes, Crumple Joints, Wall Slab, Roof Tops etc,) besides using it for treatment for Existing Buildings suffering from dampness, be it from Roof, Walls, Sub soil water. AS BOND  due to its inherent property of forming an impregnable membrane which is impermeable, has following advantages over conventional Polymer modified bitumen based felt / Glass fiber based felt. 

For more product info write us or call us .

We offer epoxy waterproofing with warranty of one year . We also provide waterproofing in areas under AHU or on ducting with fibre reinforcement for better  life. For more details you can call us for free site visit.
Ask for Quote


Rusted Metal Coatings

Corrosion begins with the penetration of water and chemicals collecting on metal and other porous substrates. What follows is the deterioration of the surface that is a direct result from a reaction with its environment. Unmanaged, corrosion causes premature structural and equipment failures leading to high operating costs and environmental and safety hazards.

 

Automotive Solutions has problem to restore back all your expensive equipment by doing 4 step procedures. These coatings not only protect metal from Corrosion & Rusting but protects from future damage.

 

The Application of these coatings can be seen in Plant & Machinery , DG Sets , DI Plants , Water Plants , Parking Lots, Collection Tanks , Neutralization Tanks , Reaction Tanks , Wastewater Treatment, Pier Deck Plates, Bridge Plates, Subway Inner Walls , Subway Tunnels or any metal which is exposed to environment & is supposed to be protected.

 

So Call for free site visit or call at 011-47037026 or write for more details www.automotivesolution.co.in  or email at automotivesolutions@airtelmail.in

 

 

Rusted Metal Coatings
Click here to Zoom Image
Ask for Quote


Job Work undertaken for Paint Application
Click here to Zoom Image
Job Work undertaken for Paint Application
We under take Job Work for Epoxy Coatings for Clean Rooms & AHU Ducting PU Coating, as per the desired requirements of our clients. We take care that good quality material is used and the whole work is done as per the desired specifications given by the client. Jobs Undertaken by Us on turnkey basis:- 1. Epoxy Floor Painting. 2. Epoxy Panel Painting for Clean Rooms. 3. Epoxy Waterproofing Solutions. 4. PU wooden Coatings.
Ask for Quote


Spray Booth Filters
Filters are probably the most important part of any paint spray booth. There is a lot to know about filtration that the average person or even the average filter distributor doesn't know. First and foremost a filter must simply be able to do two (2) things in order to be effective. One is to be able to capture and the second is to be able to hold the over spray. If the filter now being used cannot do these two simple tasks then they are allowing the over spray to pass on into the exhaust chamber, fan, stack and into the outside air. This is the leading reason that your neighbors know when you are painting. This is also how cars in the parking lot get "painted". Cheap and junk filters that don't work can end up costing you a lot of money. Good and effective filters that don't fit well into their frames or track allow contaminated air to "by-pass" them through the spaces left by poor fit. Either way you are not capturing and holding the over spray as required. This over spray that is allowed to pass on to the inside of the exhaust chamber, fan and stack will accumulate on these surfaces. Here is where fires start in spray booths and they have a habit of starting at night or on week ends when nobody is around. They are ignited by a phenomenon called composting. Good and effective filters don't allow contaminated air to by-pass through the spaces left by poor fit. With us, our clients get superior quality filters that fulfill the requisite requirements of spray booth filters. There are 3 types of filters used in spray booths: • Pre Filers • Ceiling Filters • Floor Filters GET OUR SPECIAL SCHEMES OF PAINT BOOTH FILTER SET . Conditions Apply
Spray Booth Filters
Click here to Zoom Image
Ask for Quote


AS Dust Buster Booth Coatings
Click here to Zoom Image
AS Dust Buster Booth Coatings
As Dust Buster Booth Coatings a perfect tacky coating for spray booths, it holds dust & airborne dirt at the same time protects the booth. As dust buster coating is easy to apply by using a spray gun. As dust buster coating is also easily removed with warm water or pressure sprayer. Using as dust buster booth coating not only keeps booths clean and dust free but also paint jobs.

Characteristics:

• Excellent Dust Adhesive
• Long Lasting
• Pleasant Aroma
• Water-clear
• Perfect Light reflection
• Environmental Friendly
• Temperature Resistance 150 Deg C

Pack Size: 5 Lt. & 20 Lt. Can
Ask for Quote


Nitrile Gloves
We offer Nitrile Gloves that have satin unlined interior for user comfort. It also has extended length for more hand safety & protection. These nitrile gloves have outstanding physical strength and better resistance against a wide range of chemicals. The raised pattern at palm on gloves provides better & non skid grip.

The range of gloves are as follows:-
1.Nitrile unsupported chemical resistance gloves
2.Nitrile supported gloves ( Heavy , Medium & Light Work )
3.Natural latex gloves 
4.Neoprene gloves

These gloves come in various varieties
1.Thickness available 11, 15, 18 & 22 mil.
2.Gloves available with cotton flock lined.
3.Gloves are available with inner fleece fabric to absorb sweat.
4.Gloves are nitrile coated that gives protection from various solvents, diesel and various acids.
5.The gloves can be used for various applications.
a.Food Industry.
b.Pharmaceutical.
c.Engine Rooms, etc.
d.For Light, Medium & Heavy Work.
e. Any Other Usage where safety in concern.
Nitrile Gloves
Click here to Zoom Image
Ask for Quote


AS Paints
Click here to Zoom Image
AS Paints
We offer:
I. CLEAR AS-1000: It is a High Solid Two component Polyurethane Clear Coat for bodywork repair. It is easy to apply, has excellent gloss, good levelling and high resistance against weathering and chemicals. The two different types of AS hardeners to adjust drying times are available.

• Pack Size: 1 Lt & 5 Lt

II. GLOBAL AS- 51 PRIMER SURFACER It is a 2K High Build Polyurethane primer filler for bodywork repair & Paint Repair. In the development of this product, two characteristics have been carefully enhanced and that are: Quality and Ease of Application in the workshop. It possesses a high isolating quality and an excellent adhesion to putties, fillers and properly sanded hardened paints.

• Pack Size: 4.8 Lt Set

III. PU PAINTS: The following types of paints are available in this category:

AS-1060: is a two component acrylic urethane enamel suitably pigmented with light fastness solid colours with high opacity which is applied on Mild Steel & selected metals. It is available in both matt and glossy finishes. They can be used on a wide variety of metallic surfaces
AS-1080: It is a Two component acrylic urethane base suitably pigmented. Available in matt finishes, it can be used on a wide variety of mild steel, selected steel, wood and on selected plastics. This product is especially designed for OEM’ s.

Pack Size: 1 Lt. & 5 Lt.

IV. Epoxy Primer & Paint: We offer Epoxy Primer & Paint as AS-2030 EPOXY PRIMER and AS- 2050 Epoxy Paint. AS- 2030 is a 2K Epoxy Base Zinc Phosphate pigmented anti corrosive primer. In the development of this product, following characteristics have been carefully enhanced:

• Adhesion to GI Sheet
• Mild Steel & Aluminium. Used by Coach Manufacturers.

In addition to this, we have range of various other Epoxy primers that have adhesion on Rusted Panels.

Pack Size: 1 Lt. & 3 Lt.
Ask for Quote


AS Paper Paint Strainers
We offer AS Paper Paint Strainers that are used for filtering auto repair paints & clear coats. These are also suitable for straining waterborne paints. Packing: 100 Pcs in a box (1 Case=4 Box x 100 Pcs).
AS Paper Paint Strainers
Click here to Zoom Image
Ask for Quote


Masking Solutions
Click here to Zoom Image
Masking Solutions
The various Masking Solutions available are:

I. AS Masking Paper: AS Masking Paper is a special kind of masking paper coated from inside to prevent any kind of thinner or paint bye pass through the paper. Compared to normal masking paper AS Masking papers has the following advantages:

  • Customized sizes to customer requirement
  • Saves time
  • Special coated paper
  • Reduces wastage


AS Masking paper comes in width of 30 Cm, 45 Cm, 60 Cm & 90 Cm. It is having a standard length of 300 meters per roll.

II. AS Masking Foils: AS Masking Foil is used for covering the vehicle. The foil helps cover the entire car in one go. The foil has special antistatic property that sticks to the vehicle to be masked. The Foil comes in width 3.8 Mtrs width and Length of 200 Mtrs per roll.
Ask for Quote


PTFE Coatings ( For Car Paint )
Your vehicle's paint is under constant attack by the sun's UV rays, industrial fall out and acid rain.

Car waxes do not provide the long term protection necessary to guard against this type of damage. Most of car waxes are made from inexpensive camuba waxes and we all know what happens when wax gets hot- it melts! Once the wax gets hot, it becomes stick and starts attracting and holding dirt and pollutants next to your car's paint.

Automotive Solutions Provided Latest P.T.F.E Paint Protection System

We know your car represents your personality. Automotive Solutions car protection coatings are durable and helps your Car retain its premier look so as to retain its origin. A cost effective way to maintain you car.

What is P.T.F.E Coating?

P.T.F.E Coating is one of the latest technology for car paint coating, a most effective Auto Sealant & Protectant. It is a quality viscous emulsion polish blended with P.T.F.E, exclusively formulated to prepare, polish, seal (P.P.S Formulae) & protects your cars paint finish in one application.

PTFE which looks itself firmly in the microscopic pores & voids in the paint films, gets bounded and cross-linked. This results in formation of a very tough, absolutely water resistant, antistatic, scratch resistant, non-conducting and extremely non-reactive, non-stick, durable coating on the painted surface. Due to its extremely inert chemical properties, PTFE coating does not allow any atmospheric corrosion to take place on painted surface.

PTFE 10 Features:

• Wash Resistance
• Weather Resistance
• UV Resistance
• Minor Scratch Resistance
• Acid Rain Resistance
• Anti Static
• High Gloss
• Silky Finish
• Restores Dull Finish
• Elimination of water spots, swirl marks, oxidization, etc.

Catalogue available on demand
WE ALSO PROVIDE SERVICE OF PTFE PAINT COATING AT YOUR DOORSTEP WITHIN DELHI/NCR.
PTFE Coatings ( For Car Paint )
Click here to Zoom Image
Ask for Quote


Epoxy Floorings
Wall Coatings
Waterproofing Solutions
Rusted Metal Coatings
Job Work undertaken for Paint Application
Spray Booth Filters
AS Dust Buster Booth Coatings
Nitrile Gloves
AS Paints
AS Paper Paint Strainers
Masking Solutions
PTFE Coatings ( For Car Paint )
Member IndiaMART.comCopyright © Automotive Solutions, Delhi, All Rights Reserved (Terms of Use)
Developed by IndiaMART InterMESH Limited