Following are the features of the ARAI Approved 4 gas analyser:

• High Quality SMPS operated from 90 Volts to 270 Volts
• Very low electric consumption, can work on UPS also
• Heat resistant silicon tubes
• Extra ordinary dust filters - 7 Microns high quality water separator
• 32 bit micro-processor
• Electromagnetic field resistant
• On board atmospheric pressure sensor
• Voltage drops, spike, bursts resistant
• High quality display
• 2 way RS - 232 Serial Port (synchronous)

Technical Features:

• Measure Range (Resolution):
  • CO: 0-9.999% (0.001%)
  • CO2: 0-20.00% (0.01%)
  • HC:1 ~10,000ppm(1ppm)
  • O2: 0-25.00% (0.01%)
  • Lamda(X): 0.50 ~ 3.00 (0.01)
  • AFR :7.35-29.40 (0.01)
• Warm-up: less < 4 min
• Response: 10 sec. (more than 90%)O2, NOx<20sec
• Auto zero: 20 s
• Fuel selectable: Petrol / LPG / CNG
• Leakage Test
• HC Residual Test
• RS-232 communication
• Measure item: HC, CO, CO2, 02, XAFR (Optional: RPM & I\IOX)
• Power supply: AC 90V to 270V, 50 / 60Hz
• Dimension: 270(W) x 370(D) x 170(H) mm
• Weight: 5kg
• Basic Accessory: Probe, 5M Hose, Fuse, Leak test cap, Dust filter, Carbon Filter, Software CD, Power Cord

The smoke-scan available with us has the following highlighted features:

• Indigenous and reliable design with proven technology
• Approved by The Automotive Research Association Of India - An ISO-9001 Institute
• Compliance to the CENTRAL MOTOR VEHICLES RULES 166(3) -1989
• Heating facility with heater control
• Optional Digital Display
• User friendly operation and easy to maintain
• Economically priced with low operating cost

Specifications:

• Indicator: Analog meter and digital display
• Readings: Opacity Units 0 -100% Resolution 1% for Analog Display & 0.1% for Digital Display
• HUS (Cartridge Smoke Units): 0 -100 HUS Resolution 1 % for Analog Display 0.1 % for Digital Display
• LAC (Light Absorption Coefficient): 0 - 9.99 per m (Analog Scale) Resolution 0.1 % upto 4K 0-9.99perm (DigitalScale)Resolution0.01K
• Linearity: Within + 0.1 perm
• Repeatability : Excellent
• Drift: < + 0.1 perm in four hours
• Sample Heating Facility / Peak Hold Facility / Digital Temperature Indicator / Manometer For Smoke Pressure Indication

Standard Accessories

• Set of Insertion Probes
• A Calibration Filter
• Sampling Hose
• Ground Cable
• Waste Flow Hose

The new Laser Wheel Alignment System from Auto-Serv is not only one of the most precise wheel alignment system available, but also one of the fastest. Using a perfect beam of laser light and a series of optically accurate concentric mirrors to make precise measurements of wheel run-out, castor, camber and toe, it helps to perform two-and four-wheel alignments accurately. The easy-to-use system is up and running with simple operator instructions and requires almost zero maintenance. It can handle all Passenger Cars, SUV s, Light Trucks, & Heavy Trucks.

Install and Calibrate-within Seconds
The compact and sturdy Laser Wheel Alignment System can be installed on any alignment rack or ramp from 18 inches to 48 inches high. It can also be used with any pit installation. Calibrating the equipment is very easy, it literally takes a few seconds. The result is top quality alignment every time for increased customer satisfaction.

The Auto-Serv's Laser Wheel Alignment System has the following special features:

• Accurate
• Reliable
• Easy to use
• Durable
• Fast, easy alignment readings
• Pinpoint laser accuracy
• Quick, accurate calibration
• Simple operator instruction and maintenance

Options

• Heavy Truck Duty
• Portable Alignment
• Software (which enable you to generate a print out of Alignment reading & keep record of your customers)

The equipment comes equipped with a computer, 15" VGA colour monitor, key-board, 3.5" floppy disk drive, 2 or 4 sensor (measuring heads), a large storage cabinet, 80 column printer, infrared cordless remote control,tumtables,sensor holders &other related parts.

• Suitable for all cars & LCV's
• Theoretical reference data capacity for upto 10,000 vehicles in the memory
• An archive for calling up earlier measured data in the event of customer complaints
• Permanent system monitoring even during the measuring process
• Automatic fault display & on-line help button for all measuring and system functions
• Cordless remote control provided to enable the operator to operator the m/c from the steering wheel
• Live castor adjustment, simultaneous display of castor, camber and toe readings on one single screen
• 24 value measured from the steering wheel-rapidly & precisely with PC technology
• Automatic wheel run out display prevents incorrect measurements. Four point run out compensation for higher accuracy

Techinical Data:

• Display: 15"
• Display resolution: Colour screen with high resolution graphics Unlimited reference value input in degrees
• Wheel size range: 10"-20"

Measuring Range With Accuracy:

• Total toe: ±10 with ±10'
• Individualtoe: ±5°with±5'
• Driving Axis Angle: ±5° with ±5'
• Castor: ±18°with±10'
• Kingpin Inclination: ±18° with ±10'
• Wheel setback: ±5° with ±5'
• Toe out on turns at 20 Steering Lock: ±5°with±5'
• Castor angle adjustment range: ±10°
• Load capacity of Tumtables: 600 Kgs.
• Power supply: 220V, 1 Phase

Auto-diagnostic computer balancer is known for its power and reliability. We hereby present you the 2400 computerized wheel balancing system. Built as ruggedly as larger balancer, it can provide consistent output in high volume service environments. Ideal for tight shop spaces. Its packed with state of the art hardware and self diagnostic features.
The Outstanding Features Of 2400

• Push button self calibration
• Push button start
• Quick chucking nut
• Fail-safe autotension drive

Vibration isolation system It's equipped with separately designed 56 frame motor, with high starting torque and low power consumption. The Auto-Serv 2400' s advanced design incorporates three service modules - the PCB, sensor arm and motor. That adds up to significant savings in downtime and service expense.

• Accuracy: less than 1 gm.
• Cycle Time:Approx. 6.9 sees.
• Types of balances:2planedynamic/static/oraluminiumfor hidden weights.
• Digital Readout:Grams or Oz.
• Rim DimensionRim distance 1 "-14", diameter 2"-20", width 3"-20, 102 cm (40")
• Tyre Capacity: Accommodates all passenger car and suv's
• Power Requirement: 220 V, Single Phase 50 Hz, 5 Amp.
• CVT Required: 500VA.
• Display: 20 mm highLEDs.
• Size: 24"L,16"D,35"H,(77.5x42.5x110cm)
• Shipping Size: 32"L,18"D,45MH
• Weight: 60 Kg.

It is a precision force measuring electronic balancer with 14" color monitor diaplay designed to accurately balance wheels ststically & dynamically with a minimum cycle time. the machine gives simultaneous indication for both inner & outer rim on video display. The machine can balance the wheels weighing upto 65 kgs. All the various commands & displays are situated on front panel. With the A-60's push button operated calibration, it is possible to obtain sufficient regulation range, suitable also for less common kinds of wheels (motorcycle & competition cars). The sophisticated design of the machine makes operations such as per setting of the wheel dimensions, wheel mounting & machine opeartion very simple.

Features:

• 14" high resolution color videographic dispaly with TV function
• Possibility of writing one's own name or a message on the initial screen
• Possibility of varying the tolerance function from 1 to 10 grams
• Possibilty of unbalance display in 1 gram to 5 grams
• Measurement for 2 planes as well as for 1 plane is possible
• Balancing Accuracy: 1 gms
• Data Entry: Keyboard
• Static optimization programme
• 4 alloy rim programme: ALU1, ALU2, ALU3, ALU4
• Self calibration
• Operational error code display
• Single phase low spin motor: 200 rpm
• Heavy duty shaft
• Automatic stop mecahnism after measurement cycle: Electronic DC injection braking

We offer headlight beam aligner which requires no power supply and have clear and simple aiming screen. They are quick and simple to use. They are available in two models: with Lux Meter & without Lux Meter. Depending on the needs of the clients, they can be supplied with extra long rails allowing unit to be wheeled away in drive-through application. Also, headlight beam aligner takes little space and requires space of only 500 MM between vehicle Head Lamp and Lens. Available with installation instructions and operation manual.

The 2 Post Lift (3 Tonnes) manufactured by us is electro-mechanical and is suitable for all kind of repairs that require free access to under body and wheels.

Features:

• Very low minimum height-only 105 mm
• Easy, quick installation and very little maintenance
• Sturdy and reliable
• Asymmetric design and angle-set posts allow car doors to beopened freely
• Lifting capacity: 3000 kg
• Total width: 3000mm
• Drive-through width: 2120mm
• Post height: 2600 mm
• Lifting height: 1890 mm
• Min. height:105 mm
• Pad lifting height: 105-150 mm
• Lifting time: 45 sec
• Motor: 2.2 kw 2.8 kw.

Tyre Changer manufactured by us is an Electro Pneumatic Machine with toughest and robust body. This tyre changer ensures easy fitting & removal of tyre within very short time without any trouble.

Bead Breaker
The Powerful bead breaker is operated by a double acting cylinder (186 mm) with drawn high tensile alloy steel barrel designed to last a long time even under unfavorable conditions such as humidity/ poor lubrications etc. as soon as wheel has been placed between the rubber support bracket and the bead breaking plate,the pneumatic arm can be actuated by means of paddle. The arm exerts a breakforce of 16.5 KN at 12 bar by which even difficult to shift type bead can be relived from the rim without risk of damage of rim

Four Jaw Clamping
The self centering chuck is equipped with four locking jaws rotating in either direction and can clamp either from the outside of the rim (10"-18") or from inside of rim (12"-20").The clamping jaws are operated by two pneumatic cylinder. All four jaws are running simultaneously in either direction and hence self centering is maintained. The tyre can be fitted and removed without touching the rim. Hence wheel plated rim will be totally safe

Safety Precautions
To prevent the machine from the risk of breakdown when continuously at work,an air supply service unit oil atomizer is fitted with the system. Due to this, pneumatic Cylinder are automatically lubricated with oil, hence there is no chance for humidity and foreign particles to accumulate in the Cylinders.

Technical Data Self Centering Chuck

• External Rim Clamping: 10"min. 18" max
• Internal Rim Clamping : 10"min.20"max
• Wheel Rim Width : 10"
• Drive Motor: 0.75Kw/1 HP3Ph412Vor, 0.75Kw/1 HP1 Ph230V
• Bead Breaker Opening: 13" (325mm)
• Bead Breaking Pressure: 16.5Knat12Bar
• Compressed Air required: 6to12Bars.

The A/C service equipment offered by us is available at competitive prices. Following are the features of our A/C Service Equipment are:

• The Fast Recovery
• Recycling of Recovered Gas
• Efficient Vacuuming of Car A/C system by the help of a heavy duty vacuum pump.
• Gas Charging by pressure difference.
• Automatic air purge.
• Built-in gauges with quarter turn valves.
• Heavy Duty Vacuum Pump.
• Built-in on charging
• Electronic charging scale
• Includes system's oil catch bottle
• Refillable Refrigerant tank.
• Built-in on charging
• Electronic charging scale
• Includes system's oil catch bottle
• Refillable Refrigerant tank.

Specifications:

• Dimensions: H1170xW635xD560mm (46"x25"x22")
• Weight (Approx): 70 kg (155 lbs.with tank)
• Optimal operating range: irto49oC(50°to120°F)
• Power source: 50/60 Hz,220V
• Refrigerant type: R-134a
• Refrigerant tank(Capacity): 12.3kg.forR-134A/ 13.6kg.forR-12
• Recovery rate: 0.2 kg./min.(0.5 Ibs./min.)
• Scale resolution: 0.01 kg (0.02 lbs.)
• Vac.Pumpfree air displacement: 100L/M(4cfm)approx
• Standard Accessories: R134a
• High side Hose (Red): 1830 mm
• Low side Hose (Blue) :1830 mm
• Tank Hose (Green): 760 mm
• Tank Hose (Green): 760 mm
• Coupler Low Side: 1No.
• Coupler High Side :1No.
• Adaptor Kit
• Refillable Refrigerant Tank: 1No.

Features:

• Tests available-leak test, flow tests, pulse flow
• Open flow & equalization test
• Only machine with back light system for better visualization.
• Highly precise “per hole” spray pattern visibility.
• CNC made universal aluminum injector rail for rust free finish.
• It cleans all European and Japanese MPFI (Top Fed) system
• Unique borosil glass made funnels with stop cock.
• Spray quantity measurement from 0-25ml.
• Fluid pressure control regulator.
• Max pressure 0 to 60 pounds for faster and efficient cleaning.
• Easily chargeable filter outside the machine.

Technical Specifications:

• Chassis Powder Coated Sheet Metal
• Weight: 15 Kg
• Height: 508.0 mm
• Width: 381.0 mm
• Depth: 304.8 mm
• Timer: 15 minutes, spring type
• Presser Control: Regulator type
• Switches Heavy Duty Toggle Tpye
• Control specific to operation
• Warning bazzer siren / whistle
• Power Source: 220AC / 12V DC (Vehicle Battery)

We offer an extremely reliable, low maintenance and highly accurte Rim Straightner Machine.

Its double dies at center makes it very accurate in removing all bends at corners and long life.

Accessories:

Die attachment for Maruti 800, Maruti Van, Zen, Alto, Wagon-R, Esteem, Ambassador, Fait, Tata Indica, Santro , Matiz.

Optional Accessories:

• Die attachment for Rim width 5” which includes Cielo, Honda City , Palio, Ford Ikon , Baleno, Optra
• Dia Attachment for Rim width 5,5”, which includes Gypsy,Sumo etc
• Dia attachment for width 6” which includes Tata Safari , Mahindra, Bolero etc