Avon Elastomers India

WE PRODUCE DRY BLENDS OF SPECIFIC SHADES OF VARIOUS COLOURS THAT ARE BLENDED AT THE TIME OF PRE-HEATING THE GRANULES  FOR  ITS WIDE  AND EQUAL DISPERSION, WHICH IS BETTER THAT ANY MASTERBATCHES WITH HAVE CARRIER POLYMER; WHICH MAY BE NOT BE COMPATIBLE WITH YOUR BASE POLYMER.SO DRY BLENDS ARE SAFE HAVING BEING NO CARRIER. IT CAN BE USED IN ANY THERMOPLASTIC MATERIALS. We Offer more than 2000 colour SHADES AND have the expertize in matching & providing the customer with ready-made colour pigments. Colour matching consistency is attained by advanced color technology & technical assistance with TECNOFILM,ITALY.
Our color pigment array includes :

SPECIALITY-HONEYCOLOURS,OLIVES,GUM,CREPE,BEIGES,BROWNS,BLUES,WHITES ETS.
Basic Color Range Red, Yellow, Green, Orange, White, Black, Violet, Blue & Oxides.
Ready-Made Colour Range Any Colour as per customers requirement could be made.
Application Areas

•  TPR, TPU, PVC, HDPE, LDPE, PP, PS, ABS, PP, PE, SEBS Compounds & others.
• Plastic Colouring & Compounding

Specifications of our range

• High Temperature Resistivity.
  
• Excellent Dispersion
• Low Specific Gravity
• Fine Particle Mesh
• Excellent Weather Fastness
• Excellent Light Fastness
• Free From Hazardous Substances
• High Chemical Stability
• Environment-Friendly

WE ARE PROUD TO SAY THAT WE ARE THE ONLY ONE IN OUR TERRITORY ,WHO PROVIDE THIS SERVICE.

Payment Terms:

L/C (Letter of Credit)

Our range of dynamically Vulcanized Thermoplastic Compounds have low compression and tension set performance. High resistance to environmental changes coupled with high chemical inertia, our Thermoplastic Compound are rich with following qualities :

• Resistant To Fluid And Alkaline.
• Resistant To Obsolescent Hot Air Until 125°C.
• Very Low Density.
• Good Resistant At The Atmospheric Agent & At The Ozone.
  

Application Area

• Insulation
• Components Of The Car Industry
• Anti Vibrating Products
• Industrial Components In General

We are specializing in the manufacture of top quality Eco Cork that has ecological advantages. The cork oak regenerates itself after stripping and the bark is also utilized without waste. Moreover all the trimmings and off-cuts produced during the manufacturing process are granulated & processed to make other useful materials. Eco cork find application in the following areas : -

• Footwear Mid-soles & outsoles for shoes and sandals of
   Men, ladies & children.
• Automobile
• Aeronautics
• Ship Building
• Building Construction
• Electrical & Electronics
  

Payment Terms:

L/C (Letter of Credit)

The array of PVC Compounds we are providing is highly flexible and more rubbery than the conventional PVC. This Poly Vinyl Chloride based compound in making of footwear soles and other industrial soles could be with following properties:

•  COMPACT DENSITY-1.12 TO 1.35.
• EXPANDED GRADES ALSO AVAILABLE WITH DENSITIES AS LOW AS 0.35GR/CM3 WITH HIGHLY UNIFORM CELL STRUCTURE BY VIRTUE OF HYDROCARBONS.
  
• BLENDS WITH NBR.(ACRONYTRYL BUTADIENE RUBBER)
  
• COMPOUNDS COULD BE PTHALATES FREE IF DESIRED.
• COMPLIES TO EUROPEAN NORMS'REACH' AND 'SVHC'.
• GOOD FOR DAIRY SHOES
• Resistant To Alkalis & Acids
• Dynamic Flex Fatigue Life
• Low Temperature Flexibility
• Excellent Abrasion Resistance
• Excellent Elongation
• Soft Rubber Feel
• High Flow Easy Processability

Payment Terms:

L/C (Letter of Credit)

Made from natural products, Ecor is a material that acts as a Natural leather. Particularly used for production of high quality soles. Our range of Ecor Sole Leather Sheets guarantees lowest water Absorption and high Abrasion resistant which is 30% higher than the natural leather. Our highly durable Ecor Sole Leather Sheets are available in following specifications:

• Dimensions : cm/cm 105 X 145
• Thickness : mm 2.2 , 2.5, 2.75, 3 , 3.5, 4
• Density : 1.0 g/CM3 : Method : DIN 53327
• Tensile Strength Dry : 15,4 N/MM2 ; Method :DIN53328
• Tensile Strength Dry : 15,4 N/MM2 ; Method :DIN53328
• Elongation : 31% ; Method : DIN 53328
• Bending Stiffness : 100 Mpa ; Method : DIN 53350
• Stitch Tear Strength : 50N/mm Method : DIN 53331
• Thickness : mm 2.2 , 2.5, 2.75, 3 , 3.5, 4
• Density : 1.0 g/CM3 : Method : DIN 53327
• Tensile Strength Dry : 15,4 N/MM2 ; Method :DIN53328
• Tensile Strength Dry : 15,4 N/MM2 ; Method :DIN53328
• Bending Stiffness : 100 Mpa ; Method : DIN 53350
• Stitch Tear Strength : 50N/mm Method : DIN 53331
• Abrasion : 200 mm3 .Method : DIN 53616
• Adhesion Peel Strength : 2,2 N/mm Method :SATRA TM
    401
• Flexing : 60,000 cycles . Method : SATRA STM 129

We are offering a range of fine quality TPR Compounds-SBS BASED that are widely used for making footwear soles. These are Thermoplastic elastomers that are fabricated to suit customers exact needs and requirements. The Range of TPR Compounds that we offer covers the commercial to premium grades. Following are the specifications of our TPR Compounds:

• Density-0.93 to 1.00. AS PER CUSTOMER SPECIFICATION.
• HARDNESS AVAILABLE FROM SHORE A40-80A
  
• Low temperature flexibility.
• Looks and performs like vulcanized rubber.
• Excellent abrasion resistant & weather resistant.
• Recyclable.
• Good tear strength.
• Dimensional stability.
• Colourabity. 
• SURFACE FINISH-SHINY,MATT, RUBBERY.
• CREPE FINISH IN TRANSLUCENT COLOURS LIKE HONEY, OLIVES AND GUM COLOURS.
• ALL PRODUCTS COMPLIES TO REACH NORMS-WITH REGARDS TO SUBSTANCE OF VERY HIGH CONCERN(SVHC) AND WITHIN PERMISSIBLE LIMITS OR FREE FROM HEAVY METALS AND HAZARDOUS CHEMICALS AND NONYLPHENOYLS AS PER THE EUROPEAN UNION(EU) NORMs.
  

TPR Compounds are used for footwear shoe soles that includes floaters, sports shoes, Kid's shoes, mild soles. It is also used for Pen grips, Tooth brush grips and Floor mats.

Payment Terms:

L/C (Letter of Credit)

Avon Rrepresents BAYER MATERIAL SCIENCE P LTD. INDIA and has made its mark in the market for its Top-notch quality products. Our range is extensively used for footwear as well as industrial uses that includes injection moulded top lifts, spikes, soles, grips, adhesives and finishing laquers. The specific features of our range are as follows:

• Hardness range from shore A 65 to Shore A 98 to Shore D60
• Excellent Mechanical properties.
  
• Abrasion resistant upto 60 mm3
• Low temperature flexibility
• Excellent elongation
• Reusable and recyclable

Payment Terms:

L/C (Letter of Credit)

Our extensive range includes TPE Thermoplastic Elastomers that consists of three discreet polymer blocks. These blocks comprises a hard thermoplastic (polystyrene) and two elastomers .

The range we are offering has following application areas :

• Midsoles-COMPACT AND EXPANDED. WE ARE EQUIPPED THE LATEST DEVELOPMENT OF EXPANDED INJECTION AND COMPRESSION MOULDIND SEBS BASED COMPOUNDS.
  
• Medical Orthopedics
• ALL KIND OF MATS FOR SITTING, YOGA MATTS ETC.
  
• ADULT TOYS
  
• GRIP INDUSTRY-Sport Goods/WRITING INSTUMENT INDUSTRY.
  
• Food Packaging
• Automotive Appliances-FOR RUBBERY AND TRANSPARENT COMPONENTS.
  
• Electronics And Other Applications.
  

Following are the specifications of our range

• Soft Feel
• From Shore A 5 To Shore D 60
• Non-Slip
• Elastic
• Printable
• Electrically Insulating
• Uv-Light & Weather-Resistant
• Excellent Adhesion
• Highly Transparent And Foamable
• 100 % Recyclable
• Resistant To Acid And Alkalies.
• Easy To Process And Color.
  

Product Code:	TPE
Payment Terms:	L/C (Letter of Credit)