Heat Exchangers

We manufacture and supply an extensive series of shell & tube heat exchangers adhering to TEMA/ASME standards. These shell & tube heat exchangers are able to handle high temperature & pressure applications that are suitable for various industrial applications.

We develop and export these exchangers in a wide range of sizes and capacities catering to suit individual applications and purposes.

We, at Badrin Industries, manufacture and export air heat exchanger, both in steam and hot oil heated medium. Air heat exchangers have smooth finned tube in which more fins per inch can be integrated in the entire tube length so that combination of low friction air loses/high air velocity and maximum heat transfer per square feet of face area results in high heating or cooling capacity of heat exchanger in a given space. These heat exchangers are light in weight. Our developed air heat exchangers are easy to handle and saves fuel that results in reduction in number of tubes for given B.T.U., transfer per area. Another advantage of these heat exchangers is that these require less power to deliver the required C.F.M because of lower air resistance.

These heat exchangers are usually used in rice mills, tea factories, chemical & pharmaceutical industries.

Our Heat Exchangers Manufactured With

• Individual Sections.
  
• Seamless tubes & CDW tubes.
  
• Hot dip galvannised finned tube for better efficiency & to avoid rusting.
  
• Quality production with proper design.

We offer an assortment of rice mill heat exchanger that is manufactured by using high grade raw material as per the client’s requirements. Our range is available in various sizes & specifications and is widely used in different rice mills. These are appreciated in the worldwide market and are offered at the competitive prices.

A heat exchanger for cooling oil. Most automatic transmissions are equipped with an oil cooler that's located inside the radiator. Since the radiator usually runs close to 200 degrees, the amount of "cooling" this kind of setup provides is questionable. An aftermarket oil coolers that can be installed outside the radiator can provide much better cooling, and is recommended for towing or high performance applications. Except for air-cooled engines (older Volkswagens for example) and race cars, most engines do not use an oil cooler for the engine. The engine's cooling system is usually adequate to keep oil temperatures within safe limits.

Radiators are used for cooling internal combustion engines, chiefly in automobiles but also in piston-engined aircraft, railway locomotives, motorcycles, stationary generating plant or any similar use of such an engine. They operate by passing a liquid coolant through the engine block, where it is heated, then through the radiator itself where it loses this heat to the atmosphere. This coolant is usually water-based, but may also be oil. It's usual for the coolant flow to be pumped, also for a fan to blow air through the radiator.

Tube Bundles are manufactured in wide variety of designs and material of construction. Manufactured from high quality copper, stainless steel and carbon steel these tube bundles are available in a variety of arrangments like fixed, straight and U-bend.

Specifications :

• Tube size : 9.5 od to 42 mm od.
• Material : Copper , S.S and Carbon Steel.
• Arrangement : Fixed, Straight, U Bend Type.

We offer a wised range of drying systems that are available in five standards styles. These are available in steam as well as electric heat and are suitable for particular part, rack and basket configurations. These also provide low production facility, an effective and inexpensive approach to drying.

This is basically a heat transfer equipment to heat air before another process. In Badrin Industries, we manufacture and export steam heated air pre-heaters.

Steam is passed inside the finned tubes bunks and air outside the tubes. These types of air-pre-heaters find application in papers mills, sugar mills and in power plants

An air pre heaters or air heater is a general term to describe any device designed to heat air before another process (for example, combustion in a boiler) with the primary objective of increasing the thermal efficiency of the process. They may be used alone or to replace a recuperative heat system or to replace a steam coil.

one of the purpose of the air pre heater is to recover the heat from the boiler flue gas which increases the thermal efficiency of the boiler by reducing the useful heat lost in the flue gas. As a consequence, the flue gases are also sent to the flue gas stack (or chimney) at a lower temperature, allowing simplified design of the ducting and the flue gas stack. It also allows control over the temperature of gases leaving the stack (to meet emissions regulations, for example).