logoPune, Maharashtra(Verified Supplier)
Call Us:
Products & Services

Dial Gauges

Plunger Dial Gauge

Plunger%20Dial%20Gauge

  • A sturdy and robust dial gauge.
  • Fitted with special brass bush bearings.
  • Supplied with tolerance pointers.
  • Strong and smooth metal bezel.
  • Rigid, metal case.
  • Aesthetically appealing protective top cap. 
  • Tungsten carbide ball anvil.
  • Metric gauges conform to IS2092-1983 and for the European market to DIN878-1983.
  • Inch gauges conform to ASME B89.1.10M-2001.
  • Each gauge carries a calibration certificate giving actual values.
  • Wide range of dial gauges in various ranges and readings available.
  • Special dial gauges for OEMs also manufactured on request.
  • Complete spares and after sales service available.
  • 0.001mm x 1mm dial gauge fitted with 8 jewels and conforms to JIS B-7503-1997.
  • Exported to over 50 countries all over the world.

Plunger Dial Gauge

Plunger%20Dial%20Gauge

Features:

  • Small dial diameter – convenient for use where the larger dial diameters are not possible to be used particularly in small places.
  • Ideal for smaller bore gauges like 10 to 18mm Bore gauges. 
  • Available in INCH and METRIC least counts in continous or balanced graduations....

Product Code: MODEL-40

Plunger Dial Gauge

Plunger%20Dial%20Gauge

Features:

  • The metric gauges for markets like India, Europe, South America, Japan etc. conform to IS, ISO & DIN JIS specifications with anvil thread M2.5 and clamping stem dia.8mm.
  • The inch gauges for U.S.A and Canada markets conform to ANSI specifications with anvil thread #4-48 UNF and clamping stem dia. 3/8inch.

Product Code: MODEL-56

Plunger Dial Gauge

Plunger%20Dial%20Gauge

Features:

  • Includes actual calibration certificate. 
  • Supplied to company standard.
  • Suppled in INCH and METRIC least count.

 

Product Code: MODEL-88

Plunger Dial Gauge

Plunger%20Dial%20Gauge

Features:

  • Extra large dial enables higher magnification enabling better descrimination. 
  • Comes in balanced gratuations ideal for comparative gauging.

Product Code: MODEL-105

Plunger Dial Gauge

Plunger%20Dial%20Gauge

Features:

  •  Specifications: IS, DIN,ANSI,JIS
  • Every Gauge carries a calibration certificate giving actual values.
  • Hardened stem for trouble free bamping
  • Spindle made of stainless steel
  • Fitted with tungsten carbide ball anvil
  • Regid brass case for increased regidity
  • Strong and smooth metal bezel
  • Supplied with tolerance pointers
  • Aesthetically appealing protective top cap in black color.
  • Special Dial Gauges for OEMs also manufactured by request
  • Complete spares and after sales service available
  • 0.001 mm X 1 mm dial gauge fitted with 8 jewels and confirms  to JIS B-7503

Product Code: MODEL-56-new

Lever Dial Gauge

Lever%20Dial%20Gauge

Dial gauge with lever to sense the dimension suitable for use in Tool Room to transfer hieghts using a hight gauge to check leveling and runout etc

Lever Dial Gauge

Lever%20Dial%20Gauge

  • Available in coarse and fine reading least counts.
  • Metric gauges conform to IS 11498-1985 and for the European market to DIN 2270-1985.
  • Inch gauges conform to ASME B89.1.10M-200. 
  • Available with or without accessories like 1 mm carbide ball stylus (0.04 inch for inch series) height gauge adaptor, universal clamp and 4 mm dovetail spigot assembly (0.635 inch for inch series).

Salient Features:

  • Auto reversal.
  • Fitted with Jewels and Swiss Miniature self aligning Ball Bearing.
  • Fitted with 2mm dia. Tangusten Carbide Ball Anvil and 8mm dia. Spigots.
  • Also available 1mm dia Tangusten Carbide Ball Anvil, Hight Gauge Adapter, 4mm Dia. spigots and Universal Clamp.
  • Supplied with calibration certificate.

Lever Dial Gauge

Lever%20Dial%20Gauge

  • Easy to read Larger dial diameter of 38mm.
  • Metric gauges conform to IS 11498-1985 and for the European market to DIN 2270-1985. Inch gauges conform to ASME B89.1.10M-2001. 
  • Available with or without accessories like 1 mm carbide ball stylus (0.04 inch for inch series) height gauge adaptor, universal clamp and 4 mm dovetail spigot assembly (0.635 inch for inch series).

Salient Features:

  • Auto reversal.
  • Fitted with Jewels and Swiss Miniature self aligning Ball Bearing.
  • Fitted with 2mm dia. Tangusten Carbide Ball Anvil and 8mm dia. Spigots.
  • Also available 1mm dia Tangusten Carbide Ball Anvil, Hight Gauge Adapter, 4mm Dia. spigots and Universal Clamp.
  • Supplied with calibration certificate

Long Stylus Dial Gauge

Long%20Stylus%20Dial%20Gauge

  • Comes with stylus length of 33mm
  • Available in 29 & 38 mm dial diameter.
  • Available with or without accessories like 1 mm carbide ball stylus (0.04 inch for inch series) height gauge adaptor, universal clamp and 4 mm dovetail spigot assembly (0.635 inch for inch series).

Salient Features:

  • Auto reversal.
  • Fitted with Jewels and Swiss Miniature self aligning Ball Bearing.
  • Fitted with 2mm dia. Tangusten Carbide Ball Anvil and 8mm dia. Spigots.
  • Also available 1mm dia Tangusten Carbide Ball Anvil, Hight Gauge Adapter, 4mm Dia. spigots and Universal Clamp.
  • Supplied with calibration certificate.

Back Plunger Dial Gauge

Back%20Plunger%20Dial%20Gauge

  • Robust brass case and metallic bezel
  • Highly accurate worm mechanism .....

Salient Features:

  • Rigid metallic case and bezel
  • Highly accurate worm mechanism
  • Gauge suitable for difficult inspection locations as gauging plunger is at right angle to the dial.
  • For the American market, inch gauges conform to ASME B89.1.10M-2001
  • Each gauge carries a calibration certificate giving actual values.

Universal Test Sets

Universal%20Test%20Sets

Universal Test Sets is a unique gauge that comes with accessories to enable a host of combinations in gauging on the Turn - Shop.

Salient Features:

  • Consists of Back Plunger Dial Gauge, 'G' Clamp, Universal Clamp, Swinging Arm Assembly, Tool Post Holder, Holding Rod, Tommy Bar and Anvil.
  • Swinging Arm Assembly enables the back plunger dial gauge to be used for internal work up to a depth of 40 mm similar to a lever type gauge.
  • 'G' Clamp, Tool Post Holder. Holding Rod and Universal Clamp allows multiple types of mountings possibilities.
  • Versatile combinations, allow gauging applications like concentricity checks, alignment of machine tools, testing parallelism and surface plate work.
  • Supplied in a sleek wooden case with accessories.
  • For the American market, Universal Test Set meeting the requirements of AGD standard available.

Depth Gauges

Depth%20Gauges

For qiuck and easy checks of depths and steps.

Salient Features:

  • Suitable for quick and easy measurements of depths.
  • Base with 80 mm length hardened and ground to a high degree of flatness.
  • Supplied with a set of extension rods for measurement of wide variety of depths.
  • Supplied with Tungsten Carbide contact point for longer life..
  • For the American market, Depth Gauges meeting the requirements of AGD standard available.

     

Bore Gauges

Bore%20Gauges

BAKER bore gauges allow rapid and accurate checking of bores for size, Ovality and taper as also wear of bores like Engine Cylinder bores etc. in the workshop or inspection room. All bore gauges operate on the proven principle of two diametrically opposite measuring points, one fixed and one moving with a spring loaded centralising shoe. To check the actual size of bore, the gauge must be set to size with a bore master (Master Setting Ring) of known diameter which is close to the size to be measured. Inserted into the bore, it is necessary to "rock" the gauge slowly to locate its measuring axis to the bore shown by the point of reversal of the indicator hand. The reading at that point is the deviation from set normal size. A range of interchangeable extension rods allows a single instrument to cover wide range of bore sizes.

Features:

  • Small bores from 10mm to 18mm.
  • Highly versatile 18-50mm bore gauge covers a large range for which one needs to generally purchase 2 bore gauges having ranges Ø 18-35mm and Ø 35-60mm.
  • The third bore gauge covering a range of 50-150 mm, is widely used in Automobile, Aircraft, Engine and Pump manufacturers.
  • High wear resistance due to carbide-tipped stationary and moving anvils
  • Extra wide bridge ensures automatic centering in the bore. Self- centralising feature of this bore gauge ensures that the measurement can be done with minimum of skill.
  • Furnished in a sleek wooden case containing measurement anvils and extension rods with necessary tools.

 

Thickness Gauges

Thickness%20Gauges

For quick measurement of thickness of sheets, paper, leather etc...

Features:

  • Available in different throat depths, suitable for different measurement requirements.
  • In series J130, J138/L, and J142, measurement pressure is independent of the user, resulting in accurate readings of thickness without personal bias.
  • J138. 'Push Down Type' thickness gauge is particularly useful where fine measurement is not required - for example plywood. Pushing down the plunger with the index finger closes the measuring contacts.
  • Well-balanced frames and handgrips coupled with lightweight make these gauges easy to use for the measurement.
  • Available in different readings and travels.
  • Supplied with 10 mm anvil as standard. 20 mm and larger available on request.
  • For the American market, thickness gauges meeting the requirements of AGD standard available.

Tyre Thread Depth Gauges

Tyre%20Thread%20Depth%20Gauges

A gauge developed specifically to monitor compliance with the legal requirement for minimum tread depth. Additionally, it is useful for gauging general tyre wear in the range 0-8 mm.

Features:

  • The gauge gives accurate readings to 0.1mm.
  • A 'telltale' maximum reading pointer is fitted to retain measurement, allowing the gauge to be applied to the tyre positions where it cannot be easily read.
  • A test piece can be supplied to check the accuracy at 1.6 mm. This is an optional accessory and should be ordered separately.
  • The dial has coloured bands for quick and easy reading.

     

Dial Instruments

Dial%20Instruments

Three most commonly required measuring tools in an exquisite wooden box. Many workshops and jobshops have found this PMI set as an invaluable aid to their work. Many corporate houses have chosen PMI set as their industrial gift article because of its aesthetics and high utility value. A must for Engineering Colleges and Technical Institutes.

Features:

 

External Micrometer Model MM 25:

  • Carbide tipped Measuring Faces.
  • A built in Ratchet in the Thimble to facilitate single hand operation.
  • Wide Heat Insulating grip plates to cover entire handling.
  • Robust design to withstand workshop conditions.
  • Deeper laser marking for error free reading.

     

Plunger Dial Gauge Model J02:

  • A Sturdy Robust gauge with shock proof mechanism.
  • Supplied with Tungsten carbide ball anvil.
  • Aesthetically appealing dust prevention cap provides added protection while burnished plunger exhibiting mirror finish adds to superlative performance.

Digital Caliper Model RD10:

  • Extra large-11mm, high contrast Liquid Crystal Display (LCD) allowing easy reading Thumb-roller fitted as a standard for easy controlled operation.
  • High accuracy capacitive measuring system, with high speed movement.
  • High quality construction: Measuring faces and beam made of harden stainless steel.
  • Exceptional quality to price ratio.

Product Code: PMI-Set

Dial Gauge Accessories

Dial%20Gauge%20Accessories

A variety of add on accessories to choose from to suite particular application like different anvils, backs etc.

Features:

STANDARD ANS SPECIAL ANVILS

  • TUNGSTEN CARBIDE / SAPHIRE/RUBY BALL ANVILS.
  • FLAT/HEMI-SPHERICAL /CHISEL/NEEDLE/STYLUS/CONICAL/LONG CONICAL POINT ANVILS.

STANDARD AND SPECIAL BACKS

  • CENTRE LUG BACK / FLAT BACK/ SLIDING BACK FEMALE/ SLIDING BACK MALE/ SLIDING BACK MALE WITH 8 h6 SPIGOT.

Vernier Calipers Types

Vernier%20Calipers%20Types

Vernier Calipers are available in two types - one with fine adjustment and one without fine adjustment......

Features:

  • With Fine Adjustment
  • With 0.02mm/0.001” Least Count
  • Checks OD, ID, Step and Depth
  • Accuracy as per DIN 862
  • Available in Three Ranges
VCF 10 - 0 to 130mm / 0 to 5” VCF 20 - 0 to 180mm / 0 to 7” VCF 30 - 0 to 280mm / 0 to 11”
  • Robust, Hardened and Ground stainless steel jaws and beam
  • Supplied in a sleek plastic box
  • With calibration certificate giving specified and actual values.

Dial Caliper Types

Dial%20Caliper%20Types

Dial Calipers with clear high contrast readable dial......

Features:

  • Clear, Easy to read graduated dial with Adjustable Bezel
  • With 0.02mm Least Count
  • Shock Proof movement.
  • Checks OD, ID, Step and Depth
  • Accuracy as per DIN 862
  • Available in Three Ranges

        DC 10 - 0 to 150mm         DC 20 - 0 to 200mm         DC 30 - 0 to 300mm
  • Robust, Hardened and Ground stainless steel jaws and beam
  • Supplied in a sleek plastic box
  • With calibration certificate giving specified and actual values.

To,Baker Gauges India Private Limited

RECOMMENDED COMPANIES