Electrical Heater

ngsu Baoying Jinzhou Glass Electrics Factory???0086-0514-8102538/8981058???1)Part structure The gable (buries) the formula far infrared ceramics electric heater conductor of heat to use contains above silicon 95%, the thermostable 1,800 quartz glass is the main raw material, forms the silicon dioxide after the chemical reaction, has the far infrared performance, the superficial glaze level is composed by the radiation performance good many kinds of oxide compounds, agglutinates after the high temperature smooth, artistic, is wear-resisting, merit and so on anticorrosion. The heating element becomes the screw type casting by the Cr20Ni80 resistance silk cord but to become in the heat conduction in vivo burn Hollow is honestly complete, Black and white two colors. The insulation resistance value is bigger than 100 megohm, the emissivity about 0.9, above radiation wave length 1-25 micron. Chemistry performance is very stable, in the dilute sulphuric acid solution, the heating body all soaks for 24 hours not to be able to appear the corrosive damage. Because its thermal efficiency, the emissivity, the safety coefficient, the energy conservation hold the certain superiority.The product mainly uses in attracting models the machineryIn profession and so on chemical industry, light industry, electron, medicine, food also has the widespread use. 
2)The product main technology parameter and the performance. 
1, The substrate anti- booklet intensity is440kg/Cm2; 
2, Under the normal temperature the part electronic resistivity is 10 ohms/Cm2;??? ??? 
3, The chemical stability is good. Corrosion-resisting; (Anti- oxidized use effect good) 
4, Uses the Central Africa radiating surface heat los to be small; 
5, The substrate heats up to 800C sets coldly into is cold water counter- plural number ten does not crack; 6, The radiation part circular telegram heats up to the rated power. Section electricity invasion cold water 40 time does not have the damage; 7, Radiates the part maximum emissivity≥ 0.9; 8, Energy conservation effect is obvious, lengthens above the several fold compared to the silicon carbide part. My factory production radiation part, the specification is complete, and may need to have custom-made the special specification through the customer the similar product. 
------------------------------------------------------ 
Jiangsu Baoying Jinzhou Glass Electrics Factory 
Add:No.47Taoyuan Two Village Baoying 
County,Jiangsu,China 
Tel:+86-514-8178299 / 8102538 
Fax:+86-514-8231859 / 8981058 
Contact person:Zhiyuan Zhou 
P.C:225800 

Product description:

Flanged Immersion Heaters, both round flange and square flange models are a great choice for applications requiring larger wattages. Flanged immersion heaters are designed for installation into a pipe body, tank or pressure vessel using standard pipe size. These heaters are available in a wide selection of rates, sizes and sheath materials suitable for the heating requirements of water, air and other gases. Flanged immersion heaters are very efficient since all energy that is generated is dissipated directly into the medium which is being heated. All flanged heater models incorporate tubular heater construction welded or brazed into a carbon steel pipe flange. Nema 1 terminal enclosures are supplied with all standard units. Moisture resistant and explosion proof models are also available. A number of sheath materials like Titanium, Incoloy, Stainless Steel, Steel, and Copper can be used as required for specific applications.

Standard Flanged Immersion Heaters have a 150 lbs flanges but 300 lbs flanges are also available. To guarantee sheath material and watt density compatibility with material or process being heated consult NPH. All flanged immersion heaters we offer you including heaters for hazardous locations are CSA/NRTL and UL approved.

Water immersion heaters, both round flange and square flange models are a great choice for applications requiring larger wattages. Flanged immersion heaters are designed for installation into a pipe body, than or pressure vessel using standard pipe size. These heaters are available in a wide selection of rates, sizes requirements of water, flanged water immersion heaters are very efficient since all energy that is generated is dissipated directly into her medium, which is being heated. All flanged heater models incorporate tubular heater construction welded or brazed into a carbon steel pipe flange. Name 1 terminal enclosures are supplied with all standard units. Moisture resistant and explosion proof models are also available. All flanged water immersion heaters we offer you including heater   for hazardous locations.

his heaters are used for plastic molding, extrusion and molding presses or any application where there is a need to apply heat to a cylindrical surface. They are very energy efficicient since they have a standard 1/4in thick insulation. A 1/2in thick insulation is optional. Up to 18in diameter it can be a 1 piece construction, greater than that we recommand a 2-piece construction. Ceramic Band heaters can be manufactured in widths much greater than what is practical in Mica Band heaters, eliminating heat losses between gaps in narrow band heaters and simplyfying installation. With SCR or SSR power control output, watt densities can be increased up to 30%.

Silica tube glass immersion heaters:
 We offer silica tube glass immersion heaters. These are rewireable type elements and inserted in the tubing of SS/glass/silica/titanium/stainless steel etc. Its terminals are covered with cap. fitted with flange, for installation. Red marks indicate hot and cold protions.

Heating conductor grade NICR of higher grade is evenly wound over a supporting core which is centrally located in a chrome nickel steel tube and the inner space is filled with specially selected high purity magnesium oxide. This assembled unit is then highly compressed, converting the core, powder and conductor into a homogenous mass. The bottom end of the heater is welded with a conical disc washer to prevent contamination and ease of replacement.

Applications:

1. Hot Runner Bushings
2. Packaging Industry
3. Shoe Making Industry
4. Marking & Sealing Machinery
5. Medical & Laboratory Apparatus
6. Die and platents.

Features:

1. Min Dia - ¼” & 6mm, Max Dia - 1” & 20mm
2. Min length – 1 1/2” & 40mm, Max length – 40” & 1000mm.
3. Robust Terminal with choice of Exits.
4. Bottom end disc welded
5. Available with in-built Thermocouple.
6. Highly Non-corrosive.
7. Various Watt Density option available.
8. Even heat profile & Max temp up to 750^OC
9. Specially selected High Purity Magnesium Oxide

 

We Are Leading Manufacturer of Room Heater
Specification :  

Room Heater

With Air Circulation Fan

Thermal Cut Off System

1000 Watts, 230Volts

We Are Leading Manufacturer of Heat convector

Heat convector

With Air Circulation Fan

Thermal Cut Off System

1000 Watts, 230Volts