Balaji Syndicate

We offer good quality synthetic sandwich spindle tapes at affordable prices. It consists of following three layers.

• Colored Layer : Synthetic polymer meant for better grip to transmit maximum power from the tin roller.
• White Layer : Specialised polymer fabric with natural fibre to absorb the heat in the spindles and also to prevent the speed variation in three spindles when one spindle is stopped for piecing.
• 100% Polyamide Layer : In the middle to avoid elongation and boost up physical properties.

Types of Tapes, we offer

• SS1: For doubling and spinning up to 16000 rpm.
• SS2: For TFO and heavy doubling.
• SS3: For doubling and spinning above 16,000 rpm.
• SS4: For TFO and heavy doubling (advanced).

Salient Features :

• Saves upto 16% in power consumption compared to conventional cotton tapes.
• Very low slip character due to better grip and practically zero elongation.
• Very low variation in spindle speeds even when one spindle is stopped.
• Low CV% in rpm of spindles due to less elongation and high heat resistant.
• Treated with antistatic chemicals which avoids deposition of fibres on tape.
• Perfect skiving to ensure stepless joint which eliminates knock on the spindle.

Product Code:

Synthetic-Sandwich-Spindle-Tapes

We, at Balaji Syndicate constantly striving to provide an optimum "Cot" like mahcine cots, textile cots, etc. We are the first to introduce the SSD Cot which is a spinners delight. This is closest to the aluminum press fit cot and is at a fraction of its cost. For clients who require the best, we supply the aluminum press fit cots.


Type of cots :

Plain Cots: The conventional plain cot, which is bonded with an adhesive.

SSD Cots: The SSD cot which apart from requiring no adhesive for mounting, has got a minimum interference fit between the cot and roller. The cot runs stress-free which means improved yarn quality. Unlike some other types of cots, with plastic inserts, this is not affected by higher temperatures.

PVC Core Cots: The PVC core cots is two-layer cot & it does not need adhesive for mounting. The rubber is bonded perfectly on PVC core. The cot runs stress-free which results in better yarn quality.

Alugrip Cots: The aluminium press fit cot (Alugrip Cot) which would be the obvious choice, if cost is not a factor. For this reason, this is traded and exported in sizes suitable for High speed draw frames, speed frames and ring frames.

Multiply Cots: We have invented a product and technology, by which the multiple cots will give almost a uniform shore hardness throughout its life even after repeated buffing. This cot has an additional soft, especially formulated rubber layer, between the synthetic rubber outer layer & the inner SSD or Alugrip Core. It is offered with an outer layer in any shore hardness required by the spinner.

All the above cots can be supplied of the following hardness to meet your requirement or we could formulate one to meet your special requirement. The Cots are engineered to excellent dimensional accuracy, non-stretchability, flexibility and optimum frictional characteristics.

Product Code:

Machine-Cots