Balaji Syndicate

Empowered with quality management team to supervise the quality of the products, we also supply and export ABS drive pulley. It is suitable for all kinds of spinning and doubling frames, this component is made from aerlonitrile styrene (ABS) material.

15% glass filled is used to withstand high wear & tear at enormous friction and heat-generated synthetic spindle running at higher RPM in machine. Preciously molded to achieve two gram unbalanced mass, which avoids vibration at higher RPM, we use aluminum alloy pressure die-casted adopter and bush is to fix this drive pulley.

S. No	ABS Drive pulley	Outer Diameter (O.D) Inches / mm ± 0.3	Inner Diameter (I.D) mm Tolerance -h7	Width mm
1	Adopter type	9”/228.6	38.1	35
2	Adopter type	10”/254	38.1	35
3	Adopter type	11”/280	38.1	35
4	Bush type	8”/202	38.1,40,45	40
5	Bush type	10”/250	38.1,40,45	32
6	Bush type	11”/280	38.1,40,45	35
7	Bush type	12”/304.8	38.1,40,45	33
8	Bush type	13”/325	38.1,40,45	31
9	LRG5/1, LR6, LR6S	250	45	30

Note : We are also one of the few leading names to offer ABS drive pulley conversion with hollow shaft. The cross rail and pedestals are made up of quality grade cast iron. The hollow shaft joint coupling is made out of EN8 material, with dynamic balance tolerance (1gm).

With an aspiration to go beyond the expectation of our customer in terms of quality, we also offer ABS seperator. Made from ABS – Aerylonitrile Butadiene Styrene, this product is suitable for all kinds of spinning and doubling frames. The high glossy finish polymer is used to avoid friction and state current produced during the yarn ballooning.



Technical Specifications :-

Part Name	Suitable for	Part Name	Suitable for
LR ABS Separator Long (with insert & without insert)	LR G5/1 LR 6	Jeetstex ABS Separator	JS, JS4
LR ABS Separator Small (with insert & without insert)	LR G 5/1 LR 6	Zinser ABS Separator	Zinser Z 321
Textool ABS Separator (with insert)	LRDJ 5 DJ -50	Toyoda ABS Separator	Toyoda
Jeetstex ABS Separator Small	JS, JS1, JS2	Toyoda ABS Separator (with insert)	Toyoda RY 5
Jeetstex ABS Separator Long	JSA, JS1, JS2	KTTM ABS Separator	KTTM RX1

We offer premium quality yarn carriers. Having an ability to withstand every working conditions, this product requires less maintenance. Featured with high durability, this product is easy to install and also has defect-free finish. Having high-efficiency.


Technical Specifications :

• Eccentricity: Variation in circularity on the diameter of the ring tube is known as eccentricity. Lower the eccentricity in ring tube, higher is its quality and performance. PC ring tube has a eccentricity of upto 0.1 mm.


• WT: The wall thickness in ring tube near spindle button has maximum load. It is to be noted that higher wall thickness with low eccentricity is optimum for high speed ring frames.


• Taper: The normal tube taper are 138.1.40 and 1.64 1:40. Tapes 1 mm diameter difference in 40 mm length.


• Tube Clearance: The clearance between ring tube & spindle is called as tube clearance. We know that lower clearance results in lower eccentricity that further results in high working spindle speed. Tube clearance should be maintained in such a manner that it should withstand the contraction caused by winded yarn tube, for easy removal.


• YRG: A small step groove is provided in the bottom hole of the ring tube, which accommodates the yarn on the spindle and avoids tube Jamming.


• Angle of Pull: The angle of pull depends upon the ring diameter and tube diameter.

Sin A = Ring tube O/Ring O
The higher the angle, more it results in the end breakages.