A thin arc ferrite segment magnet made of a rare earth sintered magnet substantially comprising 28-33 weight % of R and 0.8-1.5 weight % of B, the balance being substantially Fe, wherein R is at least one rare earth element including Y, and T is Fe or Fe and Co, which has an oxygen content of 0.3 weight % or less, a density of 7.56 g/cm³ or more, a coercivity iHc of 1.1 MA/m (14 kOe) or more at room temperature, and an orientation Br/4πI_max of 96% or more in an anisotropy-providing direction at room temperature can be produced by using a slurry mixture formed by introducing fine alloy powder of the above composition into a mixture liquid comprising 99.7-99.99 parts by weight of a mineral oil, a synthetic oil or a vegetable oil and 0.01-0.3 parts by weight of a nonionic surfactant and/or an anionic surfactant.
Used In Automobile industries & Motor Mfg TL:- OD/ID =+/- 2% TH=+/- 0.1 As Per Costumer Requirement

Great general purpose ceramic magnet with north and south poles on opposite flat sides. Comes with a hole in the middle for easily.
Tl :- L/W =+/- 2% TH=+/- 0.1 Size - 19x19x10 20x20x4 20x20x5 20x12x8 25x11x6 30x20x6 40x20x6 40x25x6/10 As Per Costumer Requirement Used in All industries requirements

Wiper Magnet of ferrite magnets are very hard and brittle. These ferrite magnets are available in various shapes and sizes like disc, ring, sleeves, flat, arc (segment), cylindrical, etc. These ferrite magnets are used for loud-speaker, rotor magnetos, wiper motor, DC motor, car fan, rail fan, dynamo, filter, display board, drain plug, electronic more.
TL:- OD/ID =+/- 2% TH=+/- 0.1
Size 49x39x30 49x39x25 As Per Costumer Requirement Used in automobile industries & motor mfg.
 

DC Motor magnet is one of the large donuts is available from several sources. Scrape the insulation off of the straight ends of the magnet wire where they touch the black and whitr insulated wire, but only on one side the wire's diameter.
TL:- OD/ID =+/- 2% TH=+/- 0.1
Size 30.8x24x13 31x24.3x12.5 21.3x16x12 As Per Costumer Requirement Used in Electronic industries & Motor mfg.

Dynamo Motor Magnet  Neodymium Iron Boron (NdFeB) are alloys of the Lanthanide group of elements, which are the most advanced permanent magnet materials today. Dynamo motor magnet are available in a number of different grades that span a wide range of application requirements.
Dynamo motor magnet are available in sintered as well as bonded forms. The energy product of the bonded form is much lower than that of the sintered form - up to 10MGOe.
Used in cycle dynamo motor & Electronic Industries TL:- OD/ID =+/- 2% TH=+/- 0.1
Size 26.82x8x32 26.82x8x32 (6 Volts) As Per Costumer Requirement

Ferrite Ring magnets can be used in a wide range of applications due to their high coercivity and low cost. Common applications include reed switches,loud speakers, security systems,audio and television and also holding devices such as pot magnets. These popular magnets offer a medium level of magnetism and a good depth of field. Ferrite has an excellent resistance to demagnetisation/corrosion, however care must be taken when handling the product due to its brittleness.
Used in industrial requirement Tl :- OD/ID =+/- 2% TH=+/- 0.1 Size 11.2x8.2x3.75 12x6x5 12.5x6x5 13x6.5x4 14x9.5x4 16x11.5x4 16x11.5x9 16x12x3 17x13x3 24x16x4 24x20x5 24x20x10.5 As Per Costumer Requirement

Isotropic Ring Magnet LG Rings Remo Drum Muffle Ring (Assorted Sizes) What you get with Remo LG Rings (Assorted Sizes) (RMF10). 
Tl :- OD/ID =+/- 2% TH=+/- 0.1 Size 36x18x6/8 45x22x8/9/10/11 53x24x9/10/11 60x32x10/12/13 As Per Costumer Requirement.

Isotropic Anisotropic Magnet including barium-series ferrite and strontium-series ferrite by the method of powder metallurgy. We specialize in the production of small dry pressed anisotropic magnets with various shapes of discs.
Tl :- L/W =+/- 2% TH=+/- 0.1 Size - 19x19x10 20x20x4 20x20x5 20x12x8 25x11x6 30x20x6 40x20x6 40x25x6/10 As Per Costumer Requirement Used in All industries requirements

Use of high quality raw materials such as Ferrite Powders, SiO2, Al2O3, PbO, and many more in the production of our LS Ring Magnet ensures high quality.
Tl :- OD/ID =+/- 2% TH=+/- 0.1 Size 72x32x10/12/13/15 91x36x15/17 100x57x15/17/20 As Per Costumer Requirement

Disc magnets are highly susceptible to corrosion. We offer a variety of coating and plating options to prevent corrosion and mechanical damage.
Tl :- OD =+/- 2% TH=+/- 0.1 Size 5x2 7x3 10x3/6/10 9x8/4 12x3 15x3 16x3 17x3 18x3/4 20x4/5