Baron Power Limoted

FEATURES:

• • Power Quality measurement according to DIN EN 50 160
  • Continuous measurement of voltage and current with 4 inputs each
  • Transients (70 micro sec), Flicker meter, Voltage balance, collection of events
  • Harmonic analyzer 1-50 Harmonics V and A, Inter-Harmonics
  • Symmetric components: Zero. Negative and Positive Sequence components.
  • 128 MB Flash Memory, Event memory, Transient memory.
  • 5 digital outputs and 8 digital inputs.
  • Embedded Web-Server.
  • RS485 / Fast Ethernet 101100 Base-TX
  • Supports Profibus DP V0, Modbus RTU, Modbus TCP,
  • Modbus Gateway Protocols.
  • Power meter with data Logger and power quality analyzer for Flicker Rile Control Waveform and Harmonic spectrum Measurements
  • Direct Internet connectivity

FEATURES:

• Potential-free alarm contact.
• Programmable overcurrent alarm threshold limit (from1.05 to 1.95 x Irms).
• Continuous monitoring for defective capacitor stages through self adjustment of control program
• Zero voltage and zero current tripping with alarm signal.
• “Kinked” control curve characteristics to avoid overcompensation under light load.
• Four-quadrant power control with LED display when active power is generated into mains.
• Manual / automatic operation with ability to switch each individual capacitor stage ON / OFF.
• Target power factor setting adjustable from 0.80 inductive to 0.95 capacitive in steps of 0.01.
• Preset up to three fixed capacitor stages which will be excluded from normal automatic operation.
• Independent setting of capacitor switching time to match discharge time of capacitor stages.
• Suitable for current transformers with rated secondary current of 1A or 5A.

FEATURES:

• Power meter with all power parameters

measurement with data logger and Embedded
web-server for direct Internet connectivity.

• Continuous voltage and Current Measurement
• Proper recognition of Sags and Swells
• 256 kB memory, 16 MB Flash memory Period memory (sags and swells, over-current)
• 6 Digital inputs. 6 Digital outputs, 2 Analogue outputs, 1 Analogue input
• Weekly Switching clock, programmable integrated Logic
• Proper detection of short-term interruptions
• Programmable Maximum demand Control
• Automatic Email Function

• Din Rail Mountable unit without Display
• Harmonic Measurement up to 25th cycle both V and A Harmonics
• Supports Modbus RTU RS 485 Port
• 2 Groups of Comparators with 6 Comparators in each group
• Device address can be set via 2 Coding Switches
• UMG 103 acts as a Modbus Slave in a Network which can be

controlled via suitable Modbus Master device like UMG 604 to
collect information from slave devices

• UMG 103 need to be programmed through GRID VIZ software

which has following features:
(A) Visualization with Topology View.
(B) Analysis of Measurement data
(C) Graphical Display of Measurement Values
(D) Online display of measurement values
(E) Configuration of Memory (Parameter, averaging time)

• Configuration and Programming of the UMG 103 etc

• Gateway, Email, homepage
• Large data memory of 128 MB
• Modbus, profibus, TCP/IP, BACnet, NTP, FTP, SNMP, DHCP
• Transient- (50 micro seconds) and event browser(10 ms)
• Wavefrom display for current and voltage
• Harmonic analysis (V,I,P,Q) upto the 63rd order
• PLC functionality(upto 7 user channels)
• 2 digital inputs and 2 digital outputs
• Peak demand optimization (upto 64 load sheddingsteps)
• Power quality reports according to EN50160,EN61000- 2-4
• Flicker according to standard EN61000-4-15

The reactive power control relay RM 2112 and RM 2106 controls the programmed target power factor by activating or deactivating capacitors with 6 / 12 control contacts respectively.

APPLICATION:

• Reactive Power Compensation
• Measuring input is suitable for 240V AC

DISPLAY PARAMETERS:

• Power Factor (cos Ø)
• Total voltage distortion factor (% THVD)
• Number of active capacitor steps

ALARM SIGNALS FOR:

• Overcurrent
• Fault in voltage circuit (U=0 alarm).
• Fault in capacitor stages.

Multifunctional Power Meter With Data Logger Communication Port

FEATURES :

• Power meter with additional features of Voltage, Current, Harmonic Measurements, Storage of Fixed data logging
• Indication of Field Rotation
• Harmonic Analyzer 1-15 Harmonic V and A
• Event Memory
• 2 Comparator groups with 3 comparator each
• 2 digital outputs or 2 digital input or 2 Analogue outputs
• Interface RS232 ! RS485 (Modbus) port
• Profibus DP (VO) up to 1.5 Mbitsls
• Data Transmission via external modem
• PSW Software
• Optional Storage of 160000 measured values in data memory
• Optional GPRS Communication

Multifunctional Power Meter With  Data Logger & Gprs Communication

FEATURES:

• Measurement of 1 or 3 Phase system with or without neutral.
• High class accuracy and compact design
• High precision
• Indication of V, A, A-Neutral. kW. kVA, Cos phi, Hz, kWH, kVARH.
• Harmonic Analyzer 1 - 20 Harmonics V and A.
• Optional Storage of 80,000 to 3.20.000 Values with Date and Time
• I auxiliary input, 2 relay outputs, I pulse output, 1 Analogue output.
• It supports up to 6 external l Analogue outputs, 6 Digital outputs and 3 digital inputs.
• Event Memory Min & Max Memory (Ring Buffer).
• RS 232 (or) RS 485 communication port
• Supports Profibus DP VO/V1, Modbus RTU Protocols.
• Data Transmission via external Modem Application:
• GPRS Operation:

A combination of master (server) and the slave (UMG 503 through GPRS
Modem). Depending on time set, the master will collect data from slave.
Server software will evaluate the data received for storage & report generation.

FEATURES:

• Power analyzer, more than 800 electrical parameters
• Continous scanning of the 8 channels of U/I (20 kHz/channel)
• Ethernet + Gateway, email, homepage
• Large data memory of 256 MB
• Modbus,Profibus. TCP/IP, BACnet, NTP, FTP,SNMP, DHCP
• Transient- (50 micro second) and event browser (10 ms)
• Harmonic analysis (V,I,P,Q) upto the 40th order
• PLC functionality (up to 7 user programs)
• 8 Digital inputs and 5 digital outputs
• Peak Demand Optimization(upto 64 load shedding steps)
• High Resolution Graphic Display
• Representation of online graph
• Harmonics in Bar graph
• Clear display of kWh monthly values
• Alarm Management / events with date and time stamp

FEATURES :

• Digital multimeter for DIN rail mounting
• Power analysers with more than 800 electrical parameters
• Continous sampling of the 8 channelsV/I (20 kHz/channel)
• Interfaces: RS232 and RS485
• Protocols: Modbus and Profibus
• Harmonic analysis(V,I,P,Q) upto the 40th order
• 2 digital inputs and outputs
• Temperature measuring input
• Measurement in IT- and in TN-supply systems
• Battery Buffered Clock
• 8 Energy tariffs (4 * kWh and 4 * kVArh)
• Collection of wide ranging electrical-, energy- and power quality parameters
• Minimum-,average-,maximum-values
• Free selectable averaging time intervals
• Real energy: class 0.5

FRAKO Reactive Power Control Relays use microprocessor technology to perform complex management tasks beyond the control of the power factor. The control characteristic meets all the requirements of present-day industrial power supply networks making these relays world renowned for its technical superiority. The various models of such Frako make relays have the following features.

JANITZA Reactive Power Control Relays detects the reactive and real vectors of current via current and voltage path through single phase electronic measuring system. By means of these values the controller computes the phase divergence between the fundamentals of current and voltage, and compares it to the set phase divergence. In case of a difference, capacitor duty contactors will be switched on or off. Here the reactive power controller distinguishes the switching of capacitors via contactors or semiconductor switches. Janitza relays have the following features:

FEATURES:

• Class A-PQM device for panel mounting 144*144 mm
• Power analyzer with more than 2000 electrical parameters
• Continous scanning of the 8 channels of V/I (20 kHz/channel)
• Ethernet + gateway, email, homepage
• Very large data memory of 256 MB
• Modbus, Profibus, TCP/IP, BACnet, NTP, FTP, SNMP, DHCP
• Transient- (50 microseconds) and event browser (10ms)
• Waveform display for current and voltage
• Harmonic analysis (V,I,P,Q) upto 63rd order
• PLC functionality (upto 7 programs)
• 8 digital inputs and 5 digital outputs

Compact Cylindrical Construction.

Dry Type

Highest Life Expectancy.

Highest Safety Features.

Highest Temperature Withstanding Capacity.

Highest Over Current Withstanding & Voltage Over Load Capacity.

Low Wattage Loss.

Complies to VDE 0560 Part 41, EN6083-1 & IEC 831-1 & 2 Standards.